These products are very impressive. Thanks again for all you do and for sharing your knowledge.
@eudoc19823 жыл бұрын
I've been using this brand for a while since I live in Turkey and i love all their products and I'll love to see them against 3d one. Thank you Brian for all your lovely videos.
@McKav2 ай бұрын
Hi I'm not a detailer so please forgive my "amazement" at the ability of koch chemise to remove those scratches - wouldn't have believed it possible if I hadn't seen it 🙏🇦🇺
@scottmattern4823 жыл бұрын
I've been switching to koch chemie myself. Seems like a well produced line with premium performance.
@richsmith31203 жыл бұрын
As good as the Sonax line. You just got to love the Germany products.
@lilletizz3 жыл бұрын
Waay better.
@danlc95 Жыл бұрын
Menzerna has always been good to me!
@mikeyp24473 жыл бұрын
Thanks for taking time to show us these B! Great showcase!
@1stfrompuertorico5683 жыл бұрын
Amazing to learn about Koch Chemie and proper use.
@MikesAutoDetailing3 жыл бұрын
Interesting product
@matthewgibb26403 жыл бұрын
I've been testing these for months. I think they are solvent based but they perform extremely well on single stage paints, thats when I would use them mainly. H9 mixed with F6 is a great combo.
@curtisnikel64273 жыл бұрын
Thanks Brian, as always a well presented and informative review!
@seansean80083 жыл бұрын
I love your channel. And I have said it before, but those uro pads are my absolute favorite tool in the arsenal ! Thanks for introducing me to them.
@marioskosmidhs94543 жыл бұрын
We love them in Europe
@garethshaw52103 жыл бұрын
Great video again Brian. Would have liked to have seen the compounds used with the corresponding koch chemie pad though. 👍
@Tops12123 жыл бұрын
H9 v ACA500 F6 v 3d one Lets get ready to rumble🥊🥊
@404notfound.....3 жыл бұрын
Exciting times in the detailing industry! Some very impressive products.
@richsmith31203 жыл бұрын
Time for another Compound series. 3D vs Sonax vs Xtreme Solutions vs Koch Chemie
@kingkangjoe3 жыл бұрын
How do these compare to griots aio?
@richsmith31203 жыл бұрын
@@kingkangjoe These are not AIO polishes.
@AmirAbdullah3 жыл бұрын
@@kingkangjoe the koch line has its M302 with wax in it as a one step type of finishing product. But it’s the M302 it’s the finishing polish so it probably won’t have the cut the Griots product will .
@jayz3133 жыл бұрын
Thanks for reviewing these. One thing I've learned from you if you have something that works stick with it. I really enjoy 3D One, and Sonax Perfect Finish, for what I do these cover most of of my needs. Like you taught us, team it up with right pad. I did try a small bottle of the KC M3.02, thought it worked really well, but I give Perfect Finish the edge, for me if needed I can get a little more cut out of PF, and the gloss is amazing. 3D One did a great job creating a product so versitile, and priced right.
@williamthomastaggart50803 жыл бұрын
Thanks as always Brian.
@jamesbiedlar5903 жыл бұрын
Great video once again! I will have to try some.
@TheCarDetailingChannel3 жыл бұрын
I love when companies use that style of bottle and self cleaning cap
@dimmacommunication3 жыл бұрын
that " self cleaning cap " tends to get stuck tho.
@koyomin41433 жыл бұрын
Yea time for another compound series 🙏
@dimmacommunication3 жыл бұрын
H9 is king of heavy compounds
@richardtregonning9543 жыл бұрын
Outstanding job as always Brian thank you
@GSP-763 жыл бұрын
Koch Chemie is as good as it gets in the compound/polish arena. I used Jescar correcting compound religiously for a long time until I tried Koch Chemie...their products are fantastic and worth every penny.
@danlc95 Жыл бұрын
I actually though Jescar out performed Koch in every division. I was really disappointed in KC. I was expecting game changing results based on the hype.
@MarcoRotax3 жыл бұрын
Little tip, H9 underperform in cold situation like 10°celsius or less, better move into something else. M3 is super, i love it.
@owensteele12743 жыл бұрын
Would be fantastic to see how the H9.01 fares on the cutting compound podium. It will be well up there I'm sure. This range is amazing.
@dimmacommunication3 жыл бұрын
Finally :) Been enjoying my H8.02 for a while now , works a charm
@mattduffy20233 жыл бұрын
Wow buddy very impressed with that line up and your indepth knowledge of detailing. Now I know when I go off roading around Pittsburgh to drive it directly to you for paint correction...😆
@apexdetail853 жыл бұрын
I am closer to Philly.🙂👍
@pgill26823 жыл бұрын
Love koch chemie so far! F601 and m302 are awesome
@anthony39533 жыл бұрын
Would m302 be good if My paint is in great condition but want to polish before adding protection ?
@tbird719313 жыл бұрын
I'm blown away how well you work that rotary. Mine likes to jump and everything else. But I'm also using a foam pad.
@richardseem79483 жыл бұрын
amazing video and product review good friend. b well
@captrans3 жыл бұрын
Good stuff been using few weeks I get mild dusting on the red and harder wipe offs it seems compared to other out there. Angelwax wipes easier Pads are good. Red pad seems to sling alot at first due to very open cell. I found both pads prevent sling if you apply closer to center of hole
@danlc95 Жыл бұрын
Red didn't cut as much as I was expecting either.
@enda8353 жыл бұрын
I’ve been using Koch products for about a year now and have yet to find a bad item. The glass cleaner is excellent.
@chrismurphy7833 жыл бұрын
I would like to see how H9 would compare to the podium compounds. Also, how would the F6 compare with 3D One?
@jasoncraig70963 жыл бұрын
I will second that comment!!!! Bring on the battle!!!
@AmirAbdullah3 жыл бұрын
I third this as well.
@jtm19793 жыл бұрын
Me too. Also new Rupes da coarse compound. And Gyeon Compound+
@MelodiaBlasku3 жыл бұрын
Koch vs sonax vs rupes - i would like to See this comparsion too 👍
@ptheledge53903 жыл бұрын
My go to polishes absolutely love them
@olgai.menendez94933 жыл бұрын
Wow, I really liked that product. I got me some of that microfiber pad I haven’t use it yet. Can’t wait to try it on my friends vehicle!
@marksafady59863 жыл бұрын
Thought I would see a very impressive at the end. Thanks for the video.
@apexdetail853 жыл бұрын
After I have tried ALL of the polishes....maybe.🙂
@neilwalker50413 жыл бұрын
Great looking group of polishers as there are so many high quality products on the market. You may be busy with another cutting compound contest.
@Normster323 жыл бұрын
Would love to see this again Sonax CutMax . Been a while for a good compound showdown... 🙏
@NinaBabyTV3 жыл бұрын
Sir, you are the KING of Details. I will drive up to your shop one day, that is a must. Brian btw, what about rock chips in a situation like this video? Do they need to be filled in first? I am so tempted to even try an enhancement/polish by hand.
@apexdetail853 жыл бұрын
Rock chips are filled in as well. They are filled in after the correction here. We dont want to risk pulling out the OEM paint during correction. You are welcome to drop by anytime.
@theoneslim1676 Жыл бұрын
Brian it’s only right to see where their cutting compound sits on the food chain. I want to see it go head to head against the Sonax cut max and the Jescar correcting compound
@alanwallace32533 жыл бұрын
I’m not a product junkie but I’d agree they were impressive. I’ll have to compare $$ to Sonax. It’s tough to change when you have a line up that gives you results.
@MNpicker3 жыл бұрын
Nice.. definitely gonna try this.. I have been wanting to try it for a long time now but now that it is a lot easier to get here in the US its a no brainer.. Of course we have to have a vid of the heavy cut against Sonax Cutmax👀
@jeremys83603 жыл бұрын
Can’t wait for the cleaners to be readily available
@FABAutomotiveDetailing3 жыл бұрын
Does this mean I will be seeing you again in just a few weeks? I have used a few of these and really like them. The pads are interesting and seem to work well.
@apexdetail853 жыл бұрын
I cannot make it...unfortunately. Let me know how it goes.🙂
@FABAutomotiveDetailing3 жыл бұрын
@@apexdetail85 Darn it man I was hoping to chat with you! I will let you know!
@amazingvloger35623 жыл бұрын
Thanks for making the vedio.please make a vedio of h9 vs rest compounds.specialy vs fast correcting cream and angel wax
@jamescarter76633 жыл бұрын
Brilliant video and my thanks go out to you. What do you think of F6 to be used as a one step on a Mercedes with only very light marring with Chemical guys free hex logic pads with a DA? Would love to hear your thoughts.
@bigd98483 жыл бұрын
First time I seen this brand💎💎
@johnmbell46423 жыл бұрын
Hey Brian, this Mic sounds better than the last Mic but the mic in the closing segment sounds the best but these two mics are very very close and either one would be about the same. That K.C. Is interesting stuff Matt really likes their car soap maybe you could give that a try isometime see what you think have a good one🇺🇸👍
@apexdetail853 жыл бұрын
Thank you for the feed back. Much appreciated.
@gleamcardetails3 жыл бұрын
They work well also with Scholl pads
@donschultz7759 Жыл бұрын
Hey Brian awesome video. My question for ya. the P3.01 is for the paint enhancement side correct? Just wondering
@larryisaac89883 жыл бұрын
Hi Brian, i've started my detailing business and im learning a lot from you. Thank you very much. Recently i purchased a Rupes Mille gear driven polisher. I hope you can make comparison of Koch Chemie H9,M3o2 vs Rupes Coarse, Fine compound and polisher, both claim of longer work time and lubrication. Thank you ahead.
@richardscogin69063 жыл бұрын
Why are you not using their pads ??? Ok you answered that question at the end Thank you. Because of some of your videos I ordered $480 of products form Xtreeme Thanks for the 10% off that was nice . 496 I will use on my new C8 before PPF and I know you do not like PPF but I do not have your talent with pain and I will track my car . I also have 403 for my challenger its white .
@thomashansen38753 жыл бұрын
KC Polish Compound and Sonax are the best
@MikesAutoDetailing3 жыл бұрын
Well done informative video
@fuuks83 жыл бұрын
Can you make a video of the pads and compounds polish? To see the full results of the combo
@konradsmorawski79412 жыл бұрын
While using M2.01 do I need to protect rubber sealings (etc. around windows) with 3m tape or can I save this and this compound can be wiped-out without cleaning like at Sonax compounds?
@eamonmcgowan47073 жыл бұрын
Like all Pro's at the very top of their game...high dive, golfer, race car, you make it look sooo eazzzy! I would like to see this against your fav the 3D line. Thank you. encinovillageyo
@sergiobarraza18063 жыл бұрын
Thought you would run the contest on harsh sand marks as others. From 3k to 800 grit. Anyways Koch chemie its good, very similar in dust control as Sonax but lacks a little of cut power. Greetings Bryan
@apexdetail853 жыл бұрын
Saving that when I put it up against 3D and Sonax
@stuartkipp65333 жыл бұрын
Great video! I'd like to see H9 v S3 gold xxl v ACA500
@TKsw1911453 жыл бұрын
What’s your favorite polishes and pads for your day to day work Brian?
@davideisenberg98443 жыл бұрын
Hi Brian.. Would love to see a video comparing Chemi 901, 3D400 and Sonax Cutmax. I've been experimenting with 3D and Sonax. Depends on paint, clear etc but both work really well. Wondering of the Chemi 9o1 is any better? Always looking for the ultimate in all one products and heavy cutting compounds.
@bobit87423 жыл бұрын
Let see it cut against sonax ultimate and finish against perfect finish 😃 cheers
@autoinfinitydetailing83823 жыл бұрын
Please do a video on 1K Nano
@lifeofbrian95113 жыл бұрын
I would like to see it up against 3D ACA and Sonax.
@speedtiktokclips2 жыл бұрын
Yes
@charliebradley42693 жыл бұрын
Hi. What pad size would you say for a 5” backing plate? The 126mm or the 150mm ? Thanks. Keep up the great work.
@hakman2393 жыл бұрын
Yh please put h9 in the cutting compound series h9 supposed to be able to remove p1000 sand marks on a wool pad
@mggtz3 жыл бұрын
AW Perfect Polish vs KC micro cut
@norcalspitshine90673 жыл бұрын
I've been debating on getting that system. Every time I do that I'm always fall back to 3d aca 500 and 3d one how do they compare.
@alanwallace32533 жыл бұрын
Brian that rotary looked like the maxshine 550. If I’m right do you have any issues with machine heating up after a couple of panels.
@karlchapman6768 Жыл бұрын
Hi, what pads would you recommend on 2019 Volkswagen clear coat? The recommended Koch Chemie pads, microfibre or Lake country pads please?
@hakman2393 жыл бұрын
I thought they where rated 9 max m3.02 is gloss 9 h9 is gloss 5 I use h9 as a one step it’s very glossy
@salmanslim Жыл бұрын
Can i use m302 on a new vehicle as a onestep without protection? And then apply a sealant after that?
@AnasDrifter3 жыл бұрын
Yes plz
@hlfbrwnhlfamzng3 жыл бұрын
Love your videos, need some advice for a white 2010 acura mdx. The front and rear bumper is yellowing. Ive tried stoner bug n tar remover, meguair's heavy wheel cleaner, claying, hd one and sonax polish with no sucess. It doesnt feel like traffic film so i assume its a clearcoat issue
@apexdetail853 жыл бұрын
You will need a re spray on the bumpers. Color coat and clear coat.
@MattSchlegel-d4z6 ай бұрын
Do you use the Koch chemie pads too
@dunzoautomotivedetailing9923 жыл бұрын
Hello Brian, love your videos! Always very informative. Can I have an email where I can ask you a question please. Thank you for all you do for us!
@apexdetail853 жыл бұрын
sure....miragebjs@yahoo.com
@the_Real_R3x3 жыл бұрын
I am on the Facebook group as well as here. What is your go get it now rating for cutting compound?
@paulbaimbridge3933 жыл бұрын
Could you review the Sudzbox product line?
@Nade3753 жыл бұрын
Have you had the pleasure of working with any of the QP-ON pro series products yet? Was thinking of replacing my bottles of the standard series with the pro since they are almost empty now but am looking for some input first.
@apexdetail853 жыл бұрын
Not the new ones...not yet. On my list.
@asamasam87083 жыл бұрын
Hi, would like to get your expert opinion that Which one is better cutting compound , Koch Chemie h9.01 or Carpro Ultracut.
@automedicphx67622 жыл бұрын
Which Kock Chemie would you recommend for a one step before ceramic coating.
@MrFishy-te8of3 жыл бұрын
Hi sir brayn i need help with pad selection for cutting and finishing on white and black cars it will highly appreciated...
@Legolas69113 жыл бұрын
Great video. How do you compare them to Gyeon compounds and polishes?
@jkroemer26853 жыл бұрын
The Gyeon are dusty compared to these and K.C overall out performs them is most aspects...cut/finish especially.
@jmbo.mailbox3 жыл бұрын
Can you compare with Carpro Ultracut vs Koch Chemie H901. Thanks
@josejpadilla59282 жыл бұрын
Would that H9 work on removing a professional grade ceramic coating?
@hberglions90462 жыл бұрын
Do you like it better than 3D one?
@jeremys83603 жыл бұрын
Also, quick question, can you use any liquid wax to correct? Something like meguiars ultimate liquid wax and a microfiber pad. Thinking of getting slight correction out of a wax application. Or maybe exfoliation with the pad and bonding with the chemical
@apexdetail853 жыл бұрын
Sure...you could correct with body moisturizer. The pad does most of the work.
@deepclean53352 жыл бұрын
What your preferences sonax fast finish or rupes uno protec. Thanks
@MUJHOOL3 жыл бұрын
*hi, I've very new to this, I've bought the claybar and lubricant then the KC302 which pads do I need for the kc302*
@NordicAdvRider3 жыл бұрын
Unfortunately they are much more expensive than 3M and Menzerna here in Sweden.
@michaeldeluca93063 жыл бұрын
Brian, what’s your go to rim and tire cleaner? Time to re-stock. Thank you.
@apexdetail853 жыл бұрын
Bilt Hamber Wheel does a great job at both....clean-garage.com/bilt-hamber-auto-wheel-1-liter-33-8oz-non-acid-wheel-rim-cleaner/
@xianreiss2 жыл бұрын
What would be the "right pad" with the F6-01?
@stephenbissett32803 жыл бұрын
Better than Sonax Perfect Finish?
@pashagora7732 жыл бұрын
What kind of buffing machine are you using?
@jayhughes65123 жыл бұрын
What pad would you recommend for a Ford focus st paint
@albertvelez63862 жыл бұрын
can I follow up with m3 if I use the f6 along with the corresponding pads?
@declanflaherty89583 жыл бұрын
how would you compare these against the 3D Aca 500 and 3D one? Have you tried Scholls Concept polishes? Any comparison ?
@apexdetail853 жыл бұрын
3D has some very aggressive polishes. other than that...you can be very successful using either.
@mikeparker98123 жыл бұрын
Ive got the H8 to use up but have opted for the Angelwax line. How do you think they compare?
@apexdetail853 жыл бұрын
You can be successful using either. Add 3D and you have some top shelf polishes.
@OraEtLabora03 жыл бұрын
has any one scored 'Go Get It Now !!!' level yet?
@albertvelez63862 жыл бұрын
Carpro ultracut vs Koch-chemie H9
@Durtyrags3 жыл бұрын
What were the final podeum finishers for the cutting compounds?