Lake Country Blue Hybrid Wool/Foam Blend Pad!! Cuts Like Natural Wool...Finishes Like A Foam Pad!!!

The Lake Country Blue Hybrid Wool/Foam Blend Pad cuts fast and finishes down without the typical shedding of a natural wool pad. The foam infused base and fibers resist caking and matting. Easily removes 1500 sand marks and higher, leaving a Glossy finish with no hazing.
Lake Country Blue Hybrid Wool/Foam Blend Pad.....www.amazon.com...
Rotary Polishers.....www.amazon.com...
Wolfgang Uber Compound......www.amazon.com...
apexautodetail.com
@apexautodetail (Instagram)
@apexautodetails (Facebook)
@apexautodetail1 (Twitter)

[@apexdetail85]

The next pads will be Lake Country Low Lint No Interface Pre-Washed Wool Pads!!

[@metalpolishshop]

Apex Detail yes looking forward to the low/ no link wool pads. Been looking at these pads for something like the new Angelwax AIO

[@metalpolishshop]

What do you think about putting a foam interface with these pads instead of the hard rubber interface?

[@Chadnator]

how would you clean these pads

[@erikdatadeen134]

Mannnn, Brian youre content is top notch. As always, thanks a million brother. You truly are THE MAN

[@apexdetail85]

Your kind works are greatly appreciated!!👊

[@maryb.9391]

Yep.. some of my favorite pads. A flexible & cushioned feel to them, particularly on contours. Good price, good cut. Thanks Brian !!

[@apexdetail85]

Yes, good cut, wish it was a bit more aggressive.

[@richardseem7948]

once again top notch performance...ur videos never disappoint...

[@apexdetail85]

Thought you would like this one!!😃👍

[@markevanado9463]

This video makes me want to get a pneumatic rotary polisher!

[@Clint_L]

As always perfection my friend. Ahhh Range Rover paint. So much fun ,) Always love new videos from you. Hope you’re well. Chat soon. ❤️

[@apexdetail85]

Yes!!! I get plenty of Rovers!!

[@edgargomez8662]

Brian great video .... Well explained and I think it is a very good alternative and to take very much into account .... Thanks for sharing

[@apexdetail85]

Anytime!!👍

[@idotdotdot]

Love this channel. No bs gimmick type videos unlike some channels.. 😂

[@jamesbiedlar590]

Another great informative video Mr Apex!!

[@apexdetail85]

Thanks!!!

[@Lierbal]

Thank you for sharing your thoughts on these pads. I use them on my Flex 3401 and PE8 and love them!

[@apexdetail85]

Great combo...the low lint short nap wool pads work great with those two as well!!

[@virendrawate2128]

Sir your detailing guru! Always a great video.

[@apexdetail85]

No sir"s here....we are all friends!😃👍

[@sonnyjohnson4715]

I'm going to have to look into these

[@apexdetail85]

Absolutely!!👍

[@gilsanchez7429]

Great video👍🏻

[@apexdetail85]

😃👍

[@markevanado9463]

Good to know that these can be an alternative to urofiber!

[@nexamax]

Awesome pads...! Looks like a perfect hybrid pad for compound and polish. Clean finish, like a good glass of wine (LOL). Thanks!

[@apexdetail85]

I couldnt agree more!🍷

[@Clint_L]

Mmmm wine!! 🍷

[@whitepearlautodetailing4745]

Nice new starting with intro. This nice pad I have it but still I did not test it .. I will do it soon.

[@94muddertrucker]

Looks like a Green Lover towel 😉

[@apexdetail85]

LOL...I have to look. Cant remember where I even found them anymore.

[@94muddertrucker]

Apex Detail 😂

[@itsathejoey]

Sick intro dude!

[@apexdetail85]

😃🤘

[@mikeyp2447]

Automatic car washes = Job security!!!

[@apexdetail85]

Pretty much!

[@NipkowDisk]

Indeed. When I have my 2017 Accord EX-L V-6 MT's oil changed at the dealer where I bought it new (I would change it myself but it's still under warranty so I let them handle it for minimal hassle), they always give me a free car wash pass. I always try to give it back to them as I will never, never, EVER let my Accord (or any other vehicle I own, for that matter) suffer such abuse!!! I'm a surveyor by profession and not a detailer, but I DO take pride in my Accord's appearance.

[@loopsandthreads5028]

Right up my alley!!

[@apexdetail85]

You will love em!!!

[@Vinzbmpnd]

Nice review on those pads.. love them myself now difference between the LC Pwp & LC Bwp ahhh?? Not for me? Maybe a little less shedding idk.. great pads to get👍excellent touch in the end with the front corner panel nice set up great shot💪💪👌🏽

[@apexdetail85]

Have you tried the Low Lint short nap wool pads?

[@DavidM-qx9bt]

Looking forward to low lint wool pad review

[@apexdetail85]

There are even better!!

[@DIRTYSANCHEZPSG]

Awesome!!!

[@apexdetail85]

😃👍

[@seventiesandbeyond]

Would these pads be suitable for soft Honda paint and the water based clear coat? Thank you

[@BRunkel07]

I’m just getting into the world of wool pads and branching off to try something new. Great review! I noticed you switched to the drill master rotary after the flex. Just for comparison’s sake? I just picked that up for $30 from HF and can’t wait to try it!

[@davenewton1570]

Incredible Bri the Finnish you get on a car is amazing have you a vid on using a Da please

[@apexdetail85]

Probably...What in particular?

[@tjoe1980]

Did you use one 5.5" and one 3" on the whole vehicle? Would you recommend Sonax Cutmax with these? Kickass video,I like the intro but I miss the 90's rock you use to have in your videos!😀

[@apexdetail85]

Yes...And these go great with Cut Max!👍

[@digitallantern593]

Have you tried the LC purple thin wool pad and if so , does it cut about the same as the blue hybrid wool pads? Want to know if I can use them interchangeably.

[@douggreen980]

Great video Brian! How would these pads compare to the Uro 50/50 pads (I just received some today). I did a little test section on my Mercedes GLK, using the Sonax Maxcut and 50/50 pad, then finished with some Anglewax Perfect Polish on a white foam pad. It seems to look good after two cutting passes, but will need to get it out tomorrow into some sunlight. I appreciate your detailing wisdom and the significant effort you put into these videos!

[@QuadTap]

which Lake Country pad and product would you recommend for buffing out an oxidized boat with a 21mm random orbital? (i know rotary with wool is probably best but the 21mm Milwaukee is what i've got so... )

[@joesno406]

I love watching all your vids there so good and detailed Thank You .. Quick question,Is there any other safe way to clean these pads I have no air compressor. Also wondering if blue hybrid can be used with a harber freight DA?

[@davenewton1570]

I can remove the swirls but find it hard to refine I end up with a haze not as clear as you achieve

[@apexdetail85]

Bump up the speed...lighten pressure. Try that.

[@tacticalh]

+Apex Detail how many pads would you recommend to correct a whole car? Since they are wool do they blow out/ clean out better than microfiber allowing to utilize less? Could you do it with one pad and just blow out/ spur out after every section? Thanks again for the awesome content and continued knowledge!

[@johnsullivan7599]

BRIAN WHAT type of backing plate are you USING in this video and why the high profile?

[@kimnewling5728]

I bought a bunch

[@MIKEYSREVIEWS]

Awesome was looking to by wool pads soon. What rpm did you use and would your recommend another compound other than Wolfgang? Can you also use the same pad with a finish polish such as Ardex Seal-B?

[@apexdetail85]

The 3rd speed setting (mid speed) I would recommend Sonax Cut Max.

[@widowmakerofkillerelite-el6317]

How would you rate this pad next to the lake country micro-fibre cutting pad when compounding a hard stubborn top coat like Mercedes?? I had some very nasty scratches on my roof but you could not feel them but they were very visible, after i did a test patch it was clear that my roof needed to be wet sanded, so i did, i started with 1500 trizact on my DA, finished with 3000 trizact on my DA (on reflection i shouldve hand sanded with raw 1500-3000 wet & dry) but ive had a real problem correcting through the 3000 scratches. Im using a DA with lake country micro fibre and menzerna hc400, machine on 5of6, slow hand movement, after 200ml of menzerna im almost there and now have some very slight spider webbing, BUT, one thing i wanted to point out, you often mention about a 5-15` angle when using a rotary, so i tried this with my DA and did a test patch using this method and the top coat just went crystal clear, it popped and gave me the finish i was looking for. Was it heat that did it? I didnt notice the pad or paint feeling warm, the result was just amazing. Ive just ordered some sonax cutmax, if i persist with the cutmax and the microfibre pad will i get this result all over instead of having to angle my pad on my DA? Thanks for any advice.

[@CristianCastro-nx2nu]

Which wool pad is more cut, purple or white?

[@sheiksdetail]

How do you like the pe-8 with a 5" backing plate so far? Or, do you prefer a full size rotary?

[@apexdetail85]

It is easier on my shoulders.. but still prefer the Pe 14-2

[@noelroga4593]

What about the short nap version of the purple foam wool, would it works well with DA? I hope it cut n finish like the one u used on a rotary

[@angelseliteautodetailing]

It my look clean but when your reallly inspect it you while see color loss from clear coat and some parts that have holograms have clear coat discoloration that only a professional can see.

[@Steve_Just_Steve]

"color loss from clear coat" Clear coat doesn't have color dummy, hints the name CLEAR coat.

[@markevanado9463]

Do you have to angle the polisher?

[@markhanson1009]

What kind of backing plate are you using with the flex?

[@seansean8008]

So you would not use this pad with a Rupes Bigfoot 15mm polisher?

[@SeanTheDetailGuy]

Thanks for the video Brian my question is this What if any wool or wool like pad would you suggest for a D.A

[@apexdetail85]

The next pads I review...stay tuned!! (LC Low Lint short nap wool pads)

[@markevanado9463]

How does this pad perform with 3Done?

[@markevanado9463]

How do these perform with 3done?

[@genysmenrunner1677]

Do you think these are better than uro fiber?

[@apexdetail85]

I love both...Uro for DA...These for rotary polishers.

[@genysmenrunner1677]

Apex Detail thanks, my arsenal is growing up every day with your videos haha

[@Brian.H..]

Any opinions on the Rupes LHR75E Bigfoot Mini DA Polisher? Am thinking of buying it over the flex due to the price difference over this side of the waters.

[@apexdetail85]

Not bad ...if you have an air compressor...the 75pneumatic is better!

[@bangaloremusic]

could these be used with an AIO?

[@dossegundos7145]

Nice 👍🏻! Did you mostly finish most of the hood and large areas with the rotary Brian?

[@apexdetail85]

Just cut...I still had to finish to bring out more clarity.

[@dossegundos7145]

Apex Detail thanks Brian, if I used the rotary, and can finish with a DA, do I use a polish, and orange pad or white pol pad? I

[@digitallantern593]

How many of these pads would you use for a 4 door sedan?

[@apexdetail85]

one...I clean out the pad after every pass.

[@digitallantern593]

Thank you sir!

[@digitallantern593]

So ... it's much cheaper to use wool over foam when correcting? I was told to use a minimum of 8 foam pads per correction.

[@visual2222]

Hi. Cool! Model Flex???

[@NipkowDisk]

Flex PE8 Kompakt at 3:15 :-)

[@markevanado9463]

Your link leads to a purple pad

[@seanscrivens]

Too bad shipping to Canada is atrocious. Tried to buy 3 of those lake Country pads and shipping was almost $50.00!!

[@cortezowens6280]

Does it leaves buffer trails

[@apexdetail85]

No hazing or trails.

[@robrod8220]

What you like best, lambswool foam, purple foamed wool or blue hybrid?

[@michaelmendez4245]

So you shouldn't use these with a DA

[@jonmike316]

This or urofiber?