come on ifixit people.....get a macro lens and get some light inside that watch so you can see things properly.....the presenter is all well and good but its about the watch and fixing it! OK vid otherwise!
@r4v14 жыл бұрын
so you can have them repair for you....lol.
@jonathanthompson55095 жыл бұрын
I need the metal bracket replacement to hold the ribbons to the watch. Where can I get one?
@urbanalbino6199 жыл бұрын
What about the girl that did the video when she had the baby. I would like her to do more videos
@christopherybarra2698 жыл бұрын
are youb willing to repair my watch if i pay and send it to you...
@ranes57225 жыл бұрын
hahaha
@Rayofficial135657 жыл бұрын
Too bad you can't actually buy those adhesive strips.
@taxninja25196 жыл бұрын
amazon. they are cheap
@tavkkal5 жыл бұрын
you can buy it on ebay! www.ebay.com/itm/3X-LCD-Screen-Sticker-Adhesive-Tape-Glue-Replacement-For-Apple-Watch-Series-1/202311023126?ssPageName=STRK%3AMEBIDX%3AIT&var=502285313147&_trksid=p2057872.m2749.l2649
@just4therecord4 жыл бұрын
Im surprised I managed to stick the adhesive on nicely without removing the screen
@Jay111119894 жыл бұрын
I have no touch response after a battery and adhesive replacement. I'm seeing something on threads about a force touch sensor?
@majikninja57546 жыл бұрын
Next we're going to forget to put on the big adhesive part for this one is the most important.
@ableite4 жыл бұрын
Is she the one really doing? She grab one tool and the the video changes to a closeup with another tool. Then returning to her face the tool changes back to the previous one.
@Jack22shah5 жыл бұрын
Can you guys please make a video for how to replace the heart tracker black plate at the back of the watch
@barbdacosta99605 жыл бұрын
Hi there can u tell me where I buy the adhesive tape for the apple watch
@theblackboyjoe8 жыл бұрын
So how do you think something like replacing the display would affect the watch water resistance.
@Cubsfan1221126 жыл бұрын
my battery in my series one watch enlarged, which is why the glass popped out of its case. will that still work if the battery is a little over sized, or will it eventually come loose again?
@supercrazymario4046 жыл бұрын
You need the battery replaced in order for the screen to fit on again. Because it’s a battery, Apple might swap the entire watch out and give you a newer one for free. They did that for my original 2015 model so now I have a Series 1. Otherwise if you don’t want to do that, popping out the battery and putting a new one in is fairly simple enough for most people
@SMFARHADUZZAMAN9 жыл бұрын
I didn't even know that you are doing this job behind the screen.
@leeeeni5 жыл бұрын
Broken mine, have a series 1. instead of 2 Broad flat cables i have on Broad and two small cables. the two small cables both ripped off
@changye96045 жыл бұрын
Pretty sure you can buy those.
@miklosmihalyvidovics69499 жыл бұрын
Can you make a huawei honor 6 assembly video? Thank u!
@lcondliffe5 жыл бұрын
So all you need is Apple Watch (38 mm Series 3 GPS) OLED Screen and Digitizer and the Apple Watch (38 mm) Adhesive Strip? I saw theres all these other adhesive parts like Battery Adhesive, Logic Board Adhesive, Wireless Charging Antenna Adhesive, Force Touch Sensor Adhesive Gasket, Display Connectors Sticker Set, and NFC Antenna. Do I need to buy all these other parts too? The only thing broken on my watch is the glass. It still turns on but I can't use it cus the touch screen sensor can't pick up my touch due to the glass being broken. I don't want to buy parts I don't need cus it adds up to buying a new watch. Anyone know about this?
@supercrazymario4045 жыл бұрын
You can either replace the whole screen or just the touch screen/glass. The top glass is actually the touchscreen unlike on iPhones so when the glass breaks, so does the touch. It’s not too difficult to do a glass only repair but it does require thin cuttinng wire, liquid UV activated glue, a UV light, and then when you’re done with that part you’ll need to replace the edge adhesive with one of those adhesive gaskets. In order to make it water resistant again, you’ll have to hold the screen down firmly while heating it up with a hair dryer which will melt the edge adhesive. Be sure to keep your finger on the screen while heating it and if it becomes way too hot to keep it there it’s too hot for the display.
@christiancanning86294 жыл бұрын
How much would you charge to fix my Apple Watch ?
@anitabankhead50847 жыл бұрын
Hey Gwendolyn, I need the black screen cover that goes on the glass part. the heat did not help pull it off without messing it up. Is there a way to get the replacement for that part?
@Zombienappalm4 жыл бұрын
Is it still waterproof?
@Benjamin062674859 жыл бұрын
HELLO!!! iFIXIT WHERE I CAN BUY THE ASSEMBLY SCREEN FOR THE APPLE WATCH?? AND OF COURSE THE ADHEVISE?? HOPE YOU GUYS CAN RESPOND THE MESSAGE!!! THANKS!!!
@artu1659 жыл бұрын
Here is the adhesive www.ifixit.com/Store/Mac/Apple-Watch-38-mm-Adhesive-Strips/IF308-002-1
@angelaj27717 жыл бұрын
It says it's not for sale?
@zaredt8 жыл бұрын
Is it waterproof after repairs?
@jackmccallum3358 жыл бұрын
That's what I wanna know too
@momadeuzeif77166 жыл бұрын
Me too
@RS-lw7kw9 жыл бұрын
Uploaded on my b-day I'm 15
@kamrannayyar93299 жыл бұрын
first now give me a hug
@emersonfnogueira9 жыл бұрын
Top. Thanks.
@FWCaptain-kv6sm6 жыл бұрын
brutal the iwatch is junk
@AbhishekYadav-eh1rq9 жыл бұрын
you r so sweet , i love your smile :)
@hellzy41884 жыл бұрын
DOES THE SCREEN SNAP IN? OR DO YOU HAVE TO GLUE IT IN