Applying Evolution Hardwax Oil on a timber floor

In this episode of Whittle Tips, Giles explains how to apply Evolution Hardwax Oil on a timber floor. There are a few different ways to do it and Giles demonstrates each method in this video.
And watch out for the kangaroo that wanted to be part of the action!
If you have any questions about any of our products PLEASE get in touch! We really are happy to help.
For more information please visit:
www.whittlewaxes.com.au
Music: SoulProdMusic, 2023, Proactive, Accessed 26 April 2023, motionarray.co...

[@Ourtinyempire]

Great info thanks so much.

[@whittlewaxes1853]

glad its helpful :D

[@grahamb959]

Another thing in the instructional document it doesn't say anything about the sand inbetween coats making it the perfect surface for the second coat. All it says it will improve the appearance, so do I actually NEED to sand inbetween coats?

[@nataliemanor8579]

Useful video. Thank you! Just one question: if you apply the hardwax oil with a roller, is there no need to remove excess with a cloth (and if so, will paper towels do the trick as well? 😊)

[@whittlewaxes1853]

Great question...Firstly be sure to use a micro fibre roller as recommended. When you roll it out, thin and evenly, the roller will gauge the correct quantity to be left on the surface . Do NOT wipe surfaces after rolling.

[@nataliemanor8579]

@@whittlewaxes1853 thanks for the tip! :)

[@grahamb959]

Informative video, but why are you saying 100ml of booster into 2L! On the tins it says 100ml to 2.5L! And doesn't mention using thinners. I just already did my whole floor! Wish I had seen this before and contacted you. Now I probably don't have enough booster

[@grahamb959]

Seriously doesn't say anywhere in the instructional document that you can't use the booster in the second coat!!!

[@grahamb959]

Spent $1700 on this product, not really impressed that your video contradicts your tins with how much booster. Also wish you could just say sanding is not required between coats it's only if you want a smoother finish or something along those lines so I knew if I had too

[@grahamb959]

Why not use the booster on the second coat? Think you guys need to improve your documentation. At least make it consistent with your videos, not impressed