Aquacomputer Ultitube D5 Next | Ultimate Combo

Here's a good look at the Ultitube Pump Reservoir Combo
Ultitube 150 Pro with a D5 Next: geni.us/mEVSvaJ
Standalone D5 Next Pump: geni.us/teSlZ
Since everything is sold out these days, here's the exact model I picked up from aquacomputer directly. shop.aquacomputer.de/product_...
120mm Bracket: shop.aquacomputer.de/product_...
140mm Bracket: shop.aquacomputer.de/product_...
My KZbin Gear kit.co/SuprUsrStan
My Amazon Storefront: www.amazon.com/shop/suprusrstan
As an Amazon Associate I earn from qualifying purchases.

[@wr2971]

Thanks a lot for this, especially for sorting out and showing how that mounting hardware went together.

[@pkennethv]

Thanks for making this detailed video!

[@Banzai431]

Hmm deciding between the 2 German designs... Heatkiller and now this. Both make great looking borosilicate glass reservoirs. Both look pretty awesome. Such a tough decision!

[@SuprUsrStan]

my vote is for the aquacomputer ;)

[@breezymaybe]

Great video dude. I was able to purchase the 200mm version 2 months ago and I can say it is awesome. The only thing about this pump you have to watch out for is that when you put the plastic controller unit back onto the pump you have to be very careful as many people have snapped off some parts of the base off by accident pretty easily. Also, the only other thing I could notice is that the pump doesn't have a flow rate higher than 300LPH where other D5's can deliver up to 1500LPH. But anyways. This pump res combo is really good and I do recommend it

[@chillout7862]

Surely u get more than 300 lph

[@jomy7616]

Flow-rate depends to the diameter and lenght of tube and number of Radiators, coolers etc .

[@bitrage.]

Bro.... no single D5 will ever hit 1500lph in a waterloop.... I literally have 4 d5s 2 in series going into parallel with another 2 in series and literally get about 10-12 lpm

[@svendistelrath4549]

"German Overengineering" hahahaha :D Thanks for the video..was looking for it and i think i will get one of those :)

[@crpeterson14]

Do you by chance have the measurement from the radiator to the front of the inlet and outlet? I can't find dimensions of the mounting bracket anywhere on Aqua computers website. Great video btw

[@6AnAsianGuy9]

What headers did you use to connect the pump res combo into the motherboard? I bought this and Idk what the 5pin is supposed to plug into. Thanks!

[@perpetualvoid4311]

It is a virtual flow sensor. Needs to be calibrated. It is only sorta accurate if you use dp ultra (aquacomputers coolant) Or plain water with no more than 30% glycol. Good enough to guess but not as good as a dedicated one.

[@Shineinpoverty]

Perfect for me. I hate mixes. The purerer the better. That crystal clear look in my loop is all I need .

[@jomy7616]

LED-ring can connected in Daisy-chain ...

[@DavidLeon140m3]

what powers the pump and can you change RGB on the pump itself or do you have to plug it in the mudderboard?

[@bitrage.]

Its still running because protection from accidently turning off all Pump n cause overheating, it can be changed in NEXT software on pc

[@1989osu]

Quick question; does the fan mount, 120mm in your case, come with the pump? Because if not, I'll have to order one from either the Netherlands or Germany, and pay shipping which costs 5X more than the bracket, as no one has them stocked in the US...

[@jomy7616]

Fan-mount is to buy separately, available in 120 and 140 mmm

[@whitemichaelwhite]

Where do the fittings go ?

[@Methodical2]

Is that a Caselab case?

[@TheGroundedCoffee]

I'm ready to mount this combo hanging to the back of my case. The 4 rubber standoffs have a lot of wiggle in them, is this normal? I'm afraid it's too soft to support the weight of it and they might tear but they seem to be as tightly screwed in the bracket as possible. I'll also be using the extra ring to attach the res to the case for extra rigidity.

[@SuprUsrStan]

The four rubber standoffs are indeed soft but they’re soft to minimize vibration transmission. As long as you have the top ring, it’s fine.

[@RisingReap]

anyone anser for this error ford5 next pump. 12V out of range? 2 of them directly on a sepperate psu for leak testing 1 works like a champ without making tons of noise the other one give's this error with noise

[@lilblackduc7312]

It seems you weren't prepared to record a product review?

[@shin2008]

Since I see you have both Aquacomputer aqualis and ULTITOP D5, which one you prefer more?

[@SuprUsrStan]

The Aqualis is a much older product. The design has been around for nearly a decade. I’ve owned mine since like 2012. The aqualis has a pretty poor design that sandwiches glass between two O-rings that may leak if it’s not tightened down or if the o ring is pinched. Ultitop is a much better design that doesn’t have this flaw and is also compatible with the d5 next. If you want the waterfall effect, you’ll have to get a Aqualis. If you don’t have to have it, I’d say get the ultitop.

[@enitalp]

Multiple days in, and i can for my life make my D5 Next pump to light up or pump, my leakshield power, but not the pump, tried hundred of thing, then made my own cable because nowhere there was a cable that fit the middle connector.

[@enitalp]

my pc is down since more than one month, time to get the part. and this stupid pump doesn't work, no documentation, no explanation at all

[@piotr2951]

Might have heard a difference if you had turned off the music in the first place...

[@joshuaslater9427]

dude, excellent vid. i ended up here from ur liquid devil page cause i snagged one too. overpriced but what isnt these days. anyways, this is definitely a pump for me to consider.

[@SuprUsrStan]

It’s such a perfect compact solution really rivals a full blown Aquaero 5/6 XT. It’s really cool with aqua suite softeware too.

[@frankd.b.9233]

A cool pump dudes just ordert 1 thanks info

[@konstantinalekseev5455]

You forget to say how it was easy for you to connect the sata power :) of course it was easy I’m sure …

[@gengpan]

Unfortunately, not compatible with win xp Can not use it for my old pc

[@chillout7862]

it doesn't seem to like pumping the ek cyro fuel coolant around anyone having this issue ?

[@SuprUsrStan]

Maybe you have a bad pump? Cryofuel should be just some water and some additives so there's no reason why it wouldn't work.

[@swizzler8053]

The manual says that you need to use their double clear coolant. Just received the pump.

[@phillysupra]

@@swizzler8053 just like ek says to use cryofuel.... It's a recommendation. Fluid brand does not matter at all.

[@user-wt3fp7gj7i]

Chinese？