Aracer Mini 5 Series | Closed Loop Tuning| Ep. 7 Finalizing Your Tune

[@colticus]

Well done. Enjoyed the series.

[@thehumblesavage2898]

Colt Anderson Thanks bro I appreciate it still got a couple more episodes to go before the grand finale

[@TheKiddOnDrums]

Great job man!

[@thehumblesavage2898]

thanks i really appreciate it. stick around about to grind on some new vids since the update.. been waiting to have a true understanding of them to provided actually quality information and not guessing

[@blaster42008]

Roll your bike backwards if it won't start due to bigger cam lope.

[@noshirirani6685]

Hello thanks for all the minirc5 videos , btw what version of the app are you using , it seems there are two , one called smart app(seems its a paid app) and a free one called smart lite. only the smart app lets you make changes / monitor , can you explain thanks .

[@thehumblesavage2898]

Noshir Irani this is the paid app. The free one doesn’t allow you to make the changes

[@noshirirani6685]

@@thehumblesavage2898 Thanks for the clarification Btw how much would it cost and is it one time fee or otherwise , one video on how its done would be great .

[@thehumblesavage2898]

Noshir Irani it’s a one time charge. Should say the price on it I think it was 15

[@GuruBoards]

Can you run the ARACER AF1 PROFESSIONAL WIDEBAND O2 AFR MODULE without the mini 5 or RC 2 super?

[@thehumblesavage2898]

No. The mini 5 and RC 2 are the computer. The Af1 module is what does the tuning.

[@Thesaviorsway]

Would a dirty air filter make a difference

[@thehumblesavage2898]

TheAlex0903 would just lessen the free flow of air

[@Thesaviorsway]

@@thehumblesavage2898 I mean for the autotune would it make it worse

[@sergemendes6870]

Thanks for your video, I have the rcmini5 , and the AF1, the AF1 keep blinking blue with 25.6 AFR ( no détection of the sensor ) / it works one month before. I have a battery charged ( many Times ) at 11.7 V , when runing at 13V . Do you know how many Volts needs the sensor to work ? Why I dont have a sensor working when the bike Run ( at 13V ) ? Many thanks

[@thehumblesavage2898]

it sounds like the O2 sensor went. is the blue light blinking in any specific pattern at all that you can definitely see is a pattern? If not then its the O2 sensor. If you need a link to know let me know

[@sergemendes6870]

Elyk G Nosnibor the blue light just blinking 3times/seconds. If you have a link Thanks ;)

[@thehumblesavage2898]

Serge Mendes yup, the unit is blinking normal so I’m pretty sure it’s the sensor Air Fuel Ratio Oxygen Sensor 17014 Wideband AFR Upstream Oxygen Sensor LSU 4.2 5 Wires for Audi VW BMW Click image to open expanded view 0258007090 0258007057 www.amazon.com/dp/B01N8PQBBM/ref=cm_sw_r_cp_api_i_d5EdEb6W4W8KM

[@sergemendes6870]

Elyk G Nosnibor oh thanks. I hope it’s not the Aracer RCmini5 , my seller send me a new AFR sensor and AF1, because I found only 9V in the harness for the heater of the sensor, after try a new battery.

[@thehumblesavage2898]

Serge Mendes if the AFI goes bad it blinks a pattern. I had one go bad I could show you video of if you want. I have broken a couple sensors loading my bike and it falling on it and then my AFI shows the same. Put a new one in and I’m good

[@jeromezepeda8878]

Hi sir can i use the auto setting in the bore up engine?

[@thehumblesavage2898]

sure can. mine is a big bore. that's why I got it

[@Miwiz1]

hey man. Im having a problem. My AFR is way to high and I cant lower it. Its at 25.6 and wont go down. any idea how i can fix this? I already moved everything on the fuel base and it just wont work. HELP!

[@thehumblesavage2898]

Do you have the AF1 as well as the Aracer? If so your 02 sensor may be bad. If you do not have the AF1 that is why you are seeing it because it’s not reading anything. It picks nothing up from the stock 02 sensor. You must have the wide band installed in the exhaust. Having only the Aracer all you can do is make physical changes in the app, but you will never see a read out unless you have the Af1 and one you have that you just auto tune and it makes life east

[@Miwiz1]

Elyk G Nosnibor ok.. I’ve got the AF1 installed and everything seems to be running smoothly, but this brings up another question. The seller told me to use the sensor for a month or so, then to remove it cause the sensor will break. I thought the sensor was supposed to stay in the pipe all the time doing it’s thing. Do I really need to remove it?

[@thehumblesavage2898]

@@Miwiz1 you can do that and just run it off the map you created since 9 times out of 10 that areas you are riding in dont change that much. I have kept mine in and have had no issued for thousands of miles , but some people have had it burn out due to moisture being in the sensor from sitting and then when it turns on can burn it out. Some intsall a switch to turn the sensor on later after it has been warmed and dried out to not be fried by moisture. I how that answered you question. If not ask more lol. there is a lot to type on this lol

[@quanwick4516]

@@thehumblesavage2898 thanks for being an awesome person man!!

[@thehumblesavage2898]

GhoStrike thank you for being a sick subscriber. I’m great full to have you around. Where you from

[@jrodfolyfe]

Thanks brotha

[@thehumblesavage2898]

jaredv408 no problem my dude. Glad I could help in any way. Definitely more vids coming