I like that you make videos like this. Covering the "basic" stuff one would wonder what is/does when new to our hobby. Not too many doing stuff like this.
@k1701e12 жыл бұрын
Thanks for uploading this... a few days ago, my monitor on my Neo Geo Cab died, I got it checked out and there is no hope, This vid has given me new hope!!
@Millionstarpopup4 жыл бұрын
Any possibility I can shove an old crt tv 📺 into my arcade cabinet using this converter? I see the red blue green plugs???
@jeffreysteen98202 жыл бұрын
I hope this works to hook my cherry masters board to an lcd monitor.when you say we need to hook the 5 wires to the pins on the converter, are the pins labeled to show us which wire goes on what pin..? And if I wanted to connect my cherry masters board to my flat screen smart t.v. could I do that is the same fashion and come out to HDMI using a different convertor..? I don't know what's available or how to go about it. Thanks for your time I apologize for this comment coming a yr late, but I did enjoy the video you make it sound pretty simple.
@maxmt4325Ай бұрын
All these boards never let me into geometry setting. Why??
@emilykaminsky28474 жыл бұрын
Hooked a computer monitor up to my arcade and the screen is flashing. Any tips on what to do to stop that from flashing?
@Owen-zm6sq2 жыл бұрын
Does this convertor board add any input lag? I want to play fighting games on my Blast City as arcade perfect as possible, but unfortunately it does not have the original jamma edge monitor.
@matthewchancery39094 жыл бұрын
How about showing us the wires that you are telling us to hook up?
@Jay844768 жыл бұрын
okay i have a working arcade monitor coming with this board [as it was used for silver strike bowling] will this work with my nes composite to vga input cable ?
@lonniecohee93945 жыл бұрын
Could someone tell me what I'm doing wrong. I think I have it wired right but all I get is a black square or sometimes different color squares. I have some pics but not sure I can upload them.
@jshodan843 жыл бұрын
Thanks man, but if i wanted to do the opposite, so connect my pc to my cga 15khz crt arcade monitor? what is the solution ther's a pcb that to this? tnx
@YourMKArcadeSource12 жыл бұрын
I found out that the people who have issues with certain games (including me) is that the firmware that's loaded onto the converter isn't compatible with the games that have issues. The ones that Jammaboards(.)com sells have the updated Firmware and work just fine. Make sure wherever you get these from that they have updated Firmware.
@xyxtheowl11 жыл бұрын
Thank you for sending that diagram. My situation is better thanks to you but it still occasionally goes blank for a second. I need to sit down and slowly adjust.
@GoodTofuFriday10 жыл бұрын
I bought one to use on my mvs. Trying it out on a computer monitor (Dell 2208wfp) and it doesnt look so great even after adjusting pots. I'll try it on my tv and see how it looks.
@moomert112 жыл бұрын
Yes, I believe the newer version of this product will allow you to do that. The item you see in my video is an older version.
@MetalTiger8812 жыл бұрын
so would this little pcb convert a 15khz into a31khz signal? i ask this because i always wondered if i could connect my megadrive to my naomi cab wich only has a vga input. but i guess i had to buy something lika a rgb scart cable, cut the scart end of and solder those wires to that little pcb pins, right?... or i just buy a jamma cab and build my own jamma megadrive >.>
@moomert111 жыл бұрын
The image would show up on the LCD screen. However, I am pretty sure the gun would not register the image on the screen.
@moomert112 жыл бұрын
@bjordan314 It should work with medium resolution games. However gun games may be different. Some gun games require a CRT monitor and will not work on a flatscreen VGA monitor.
@whompmaster9 жыл бұрын
Thanks for the video. It would have been pretty cool to show the result in the cabinet and the monitor you used since it's probably a bigger monitor.
@southside3548 жыл бұрын
hey I just got a converter but I don't know which wires to connect to my computer monitor 1981 ms pacman
@moomert112 жыл бұрын
@TeeDjayyy Nope, the VGA socket I kept pointing to was the VGA output. Maybe on the newer models that socket is the output.
@briankuhn89976 ай бұрын
can this handle 12v ?
@rgeller565 жыл бұрын
So on this board it's as 5 volts to 12 volts do you have to use 5 can you use 12 is that going to hurt it
@moomert111 жыл бұрын
Looks like there is a frequency issue. Have you tried pressing the buttons for the auto frequency detection?
@Sucharda9 жыл бұрын
Hello, i can't seem to find where to attach the cable that came with the adapter. I have a SNK Neo Geo. Do you have any photo of the place where i should attach the cable? (where is the CGA output from the motherboard?) Thanks
@Videogamerdaryll8 жыл бұрын
5 pin from my old CRT monitor is Red Green Blue...Orange and Black...Do you happen to know which is the ground and which is the Sync?
@moomert18 жыл бұрын
Videogamerdaryll in the experiance, black is always ground
@Videogamerdaryll8 жыл бұрын
moomert1 Thank you..
@moomert111 жыл бұрын
I viewed your video. I did not see where it went blank. At what time stamp does it go blank?
@MrEcaecaps10 жыл бұрын
Hello,I was wondering if there is a adjustment on the gbs8220 video converter that I can adjust to keep the screen from occasionally going blank for a few seconds.I am using it in a 1980 low res arcade the Phoenix.The picture looks amazing,but I really need to keep the screen from going blank,because that ruins the game because alien birds are still shooting at you while the screen is blank.Is the blank screen because the gbs8220 can't process the info fast enough? I was wondering if adjusting the clamp st or clamp might fix this issue? Please let me know. Ray
@luisgloria67963 жыл бұрын
Great vid bro & thank you that was very helpful
@De5con12 жыл бұрын
I wanted one of these shenanigans for the longest, never got around to getting one thou, at the time I was looking for a less costly way to play games in high resolution
@markwiygul63567 жыл бұрын
would this work to convert a composite signal from home computers that have an RCA output: 1 video, 1 audio? I've got an Atari 130XE that I'd like to convert to VGA
@p3anut4697 жыл бұрын
I know this video is old and you may not see this but any idea where I can get a power supply red/black cord? I already have a converter
@s34nvideos9 жыл бұрын
Hey, Do you have a english manual for this?? I hooked it up but i always get 'no singal'. I have 15khz vga in and 31khz monitor on the output
@moomert19 жыл бұрын
Unfortunately no. and I don't have this unit anymore. have you tried the 4 buttons in the corner. If I remember correctly, there was a signal finder button.
@s34nvideos9 жыл бұрын
Great! ill check it out, thanks for the help!
@howardmalone37 жыл бұрын
If your monitor freezes you can change verticalnpositiont to above 20 and it should work found a video that showed that
@ivannoriegacardenas8358 жыл бұрын
great video man! one question, this adapter works if I want to connect an original xbox to a cga monitor? the xbox would be wheter rca or yuv. Or do you know if that adpater exists?
@voltz157 жыл бұрын
So has anyone replaced this with an OSSC at this point?
@nexusofice91356 жыл бұрын
You should do a review on the new CGA to HDMI board that is out. I am still trying to to find a way to add audio to the line though.
@AndehX6 жыл бұрын
The GBS board does not have any kind of audio ADC, so this is impossible. The only way to do this is with an external device to combine the audio and video.
@nexusofice91356 жыл бұрын
@@AndehX I have already tried an audio injector. It does work but with mixed results. I am going to pull off the heat sink from the main encoder chip on the board and find the pinout for possible additional signal input. If that IC has a pinout for analog conversion input I may be able to get stereo sound out of it.
@AndehX6 жыл бұрын
@@nexusofice9135 You should check out the GBS8200 thread on the shmups forum. Ask Rama who currently works on the GBSControl custom firmware. If anyone can help with your idea, it's him.
@nexusofice91356 жыл бұрын
@@AndehX thanks for the referral.
@supermorph8 жыл бұрын
even with a Amtrak converter?
@MrHandsomeBasterd12 жыл бұрын
Out of curiosity, do you have arcade machines out there in a commercial setting? (forgive me if you mentioned this before). It would seem logical since you know how to service/repair them.
@moomert112 жыл бұрын
@Francisco Campos You probably have a defective unit. I don't have any tearing when viewed on my monitors
@Azurden111 жыл бұрын
And what monitor did you use? Are those not "outputs" not "inputs"... Only input should be the CGA.
@atrain8184 жыл бұрын
I am wiring up a gun.smoke dedicated cabinet. Pcb is us set 2. I have a game pro II lcd 19" monitor. The game fires up fine and plays fine. The only thing is the screen has black vertical lines in it. That should not be there. Also, when they show the wanted posters, their faces have vertical lines as well. You think this device will solve my problem?? I have pix if u need them. Also, i did try the pcb on a different cabinet with an older type monitor and it looked just fine. So, it is not the board. Lmk what u think
@moomert14 жыл бұрын
You have a sync issue.
@atrain8184 жыл бұрын
@@moomert1 so, will this converter solve the problem? Not sure what a sync issue is
@moomert14 жыл бұрын
@@atrain818 if your picture is otherwise fine, this should solve it. Wht you see in the video is an older model. I believe newer models have more bang for the buck. On the older CRT monitors, they would have a small knotty turn to fix the sync issue. Not sure about newer lcd monitors.
@atrain8184 жыл бұрын
@@moomert1 here is my email: atrain818@yahoo.com. i can send you the pix of the lcd (bad pic) and the crt .
@atrain8184 жыл бұрын
@@moomert1 my bad. I meant HORIZONTAL lines. Not vertical. Black lines running across the screen. I had to reread my post. Sorry, was half asleep earlier. Will that make a difference?
@jamick849 жыл бұрын
hi, would you have any info on how to hook this up in pot o gold game? I thought I had this all right, but I the display keeps showing out of range message
@MrNinjalo12 жыл бұрын
would that work for light gun games?
@seselapaz10 жыл бұрын
Hello! I have a question that may sounds stupid but you say in the video that the black wire goes to the ground of the power supply and the red to the 5V but in my power supply I have two different 5V one is (5V 1A) and the other is (5V 15A) so my question is what is the right one?
@moomert110 жыл бұрын
What type of cab do you have? I have never seen a power supply like that. I would first hook it up to the 1A. What part of your cab is hooked up to the 15A part?
@bjordan31412 жыл бұрын
Does it work with med res games and gun games
@silver_serpent_t73110 жыл бұрын
I have a super pacman . Dead screen. I've seen your video regarding simple monitor fixes. No neck glow. No luck on that. I would like to put an LCD in the cabinet, but the cabinet is original. Not a Jamma . Please help.
@moomert110 жыл бұрын
I have never seen the inside of a Super Pacman so I can't say for sure, however, this convertor should work.
@SoreThumbzz7 жыл бұрын
On the 5 pin connector R,G,B,GND,.where does the end wires go.Im connecting to a Nintendo pcb booard
@moomert17 жыл бұрын
Corey Brown if you are connecting to a monitor, the last wire would be your sync wire. that wire would get connected to the very last pin.
@sergeantseven42404 жыл бұрын
How do I go from VGA to CGA though? I have an old konami cabinet that was converted to golden tee classic and the monitor works fine, I want to scrap the old motherboard and set up a PC to run a MAME cabinet with a real CRT.
@jonniefast2 жыл бұрын
why run a jamma board mame is horrible
@TheTekken3d10 жыл бұрын
I plug the +5 volt and ground to it and when I turned on the changes letters spear but after 10 seconds it when off and the light of the vga adaptor when off I turn it off and on and it didn't turn on. So I plug it to the +12 volts and the light on the vga adaptor just blinks I'm using a pc power supply am I doing something wrong here?
@snstay3169 жыл бұрын
Hello. so basically I get this device, solder red green blue ground and sync to it and can I connect my monitor to my pc? is that what this can do? thanks
@moomert19 жыл бұрын
yes that is what it's supposed to do. you also need to power this unit via your aracde power supply. you power it from 5 volts. this adapter has a built in sync detect
@seselapaz10 жыл бұрын
I have a Neo Geo MVS model MV-1C and the power supply is the model JY-03 and in the label says; INPUT: 110VAC/220VAC OUTPUT: DC +5V 12A NOR (15A MAX) DC -5V 1A (MAX) DC +12V 2.5A Now I found the manual of the video converter online and it says: "The power requirement for the GBS-8220 is +5VDC +/- .5VDC @ 2A. If the power supply cannot put out 2AMP then it may cause problems with the on-board converter CPU. Usually this converter PCB would be connected directly to an arcade game power supply which puts out +5VDC up to 15A current." So I understand then that my red wire should go connected to the +5V 15A. Am I right?
@moomert110 жыл бұрын
Ah yes. Connect it to the +5v and NOT the -5v.
@micolino8310 жыл бұрын
moomert1 Sese Cabo hi guys, how do you use this Arcade CGA to VGA Monitor Convertor in order to consolize a MV-1C MVS? I'm planning to do this but actually only heart about These JROK and Neobitz Encoders. Can you please give me an advice?
@silver_serpent_t73110 жыл бұрын
I hooked up the VGA adapter. I can here the game the screen came up green after pushing the down button and than letting go. The Chinese writing came up and the menu I scrolled through. But the screen is green. Please help. Thanks
@moomert110 жыл бұрын
What are the wires from your harness to the convertor? What order did you attach them?
@josecarlosxyz4 жыл бұрын
That’s not a bad idea at all. Pc monitors are pretty good in terms of quality I mean the CRt ones. But you need to somewhat adapt them that can’t be easy inside the cabinet
@MorrisBurbank236 жыл бұрын
Do you have a guide to where to solder the red and ground wires? It's my first time upgrading the monitor
@nexusofice91356 жыл бұрын
Red is 5v and Black is ground.
@FrostyMikeGaming6 жыл бұрын
Moomert1, is this the adapter you are talking about with signal added or this adapter something else because now it's CGA and is that different then what i'm talking about for my CRT monitor?
@moomert16 жыл бұрын
Frosty Mike that's one of them . It will convert the signal
@FrostyMikeGaming6 жыл бұрын
I left you a message in your inbox on here and I don't know if you read it and I also left a link from Amazon about a adapter that looks like this one here so can you please check the link and see if that's it so that way I can order it soon.
@terrences613110 жыл бұрын
So the converter you are suggesting with a non jamma machine?
@moomert110 жыл бұрын
The convertor does not care if you have jamma or non jamma. Assuming your machine has basic red blue green ground and sync hook up, then this convertor should work.
@robikaey16711 жыл бұрын
who is it??? what is it??? sorry no idea...
@MrEcaecaps11 жыл бұрын
Hi,I just watched your video.Thanks for sharing .My question is will this adaptor work on older low res games?.I am trying to restore a 1980 Phoenix arcade coin op,it has the regular wires that you talked about in your video. please let me know thanks Ray
@moomert111 жыл бұрын
I assume it will work on older games but I cannot be 100% sure. If it was up to me, I would try it out.
@MrEcaecaps11 жыл бұрын
It worked great on my 1980 Centeri Phoenix.Thank you for taking the time to help me.Your video and help is really appericiated.
@moomert111 жыл бұрын
I'm glad my video was able to help you.
@BackXDash11 жыл бұрын
Would be possible to you confirm if this works with Mortal Kombat/Midway boards? These ones are famous for having weird sync requirements, thank you.
@AndehX6 жыл бұрын
gbscontrol. Turns this scaler into a competitive OSSC alternative.
@DinosaurHouseNZ10 жыл бұрын
Hi there, do you know why my new convertor works great to start with but after a few minutes the colour and brightness start drifting off? Thanks, Ian
@moomert110 жыл бұрын
I would think your problem is with the monitor and not the adapter. What type monitor are you using? What game are you using?
@DinosaurHouseNZ10 жыл бұрын
moomert1 I've tried 2 completely different monitors and the problem still occurs and I've tried 2 different games (Sega Sky Target and Konami GTI Club).
@moomert110 жыл бұрын
Then the only think can think of is a bad convertor.
@DinosaurHouseNZ10 жыл бұрын
moomert1 That's my thought too. I actually bought 2 of them off ebay, the cheapest ones on there. I guess it wasn't the best idea :(
@supermorph8 жыл бұрын
I see you have a gun cabinet, would this convert the board to a vga and still operate the guns as they were intended? I have the police trainer cab, and converted it to make with a HDTV, but kept the old gear, and was thinking of using it somehow
@moomert18 жыл бұрын
certain guns will only work with crt monitors
@VoltronPimp12 жыл бұрын
hey! that looks familiar, oh wait, i just bought that from you earlier today! thanks, it works great and you are right, it couldn't be easier. now i gotta re-think the cabinet i am going to build, since i can do a half jamma half mame cabinete or a jamma mame xbox cabinete or... having the extra inputs gives you a lot of options. i will post a video of whatever i end up building. this will be my 7th mama or custom built cabinet!
@moomert112 жыл бұрын
your welcome. glad my video was able to helpe you
@moomert111 жыл бұрын
Well if you go to google and enter the words "chuck" and "Fitch" ...... You will find out a lot of information.there are websites that have entire sections warning others about him.
@auxproxprox52527 жыл бұрын
Another one. The YPbPr conectors are an input or output? Thanks.
@nexusofice91356 жыл бұрын
Component input only. This outputs VGA only.
@jonarbuckle156010 жыл бұрын
got my converter in the mail today!!!!!!!!!! Now to find a beatup old monitor to use it on!! And also figure out wtf to do with my crazy ass old monitor board connections that seem to directly effect the play of the game!!
@superperfectstranger8157 жыл бұрын
What about super VGA
@jeremyrigged10 жыл бұрын
I am using the dual output with this model (RGB/CGA/EGA/YUV to VGA Arcade Hd Video Converter Board Dual Output) with a 1980 Ms. Pacman Cabaret. I have everything connected (RGB and GND) but, I only have one H.Sync GND. I do not have a V.Sync. I am not sure where to go from here? Would you happen to know what I need to do to get it running? Thanks,
@jeremyrigged10 жыл бұрын
I am using the RGBS wiring. Thanks again.
@moomert110 жыл бұрын
Jeremy Marshall I have never had a working pacman cab so I cant say for sure......however I would just connect the one sync wire you have to the single sync pin. Wait........shouldn't your wiring have both H and V sync? If so, connect them together and then connect to the single sync pin on the convertor.
@jeremyrigged10 жыл бұрын
moomert1 I may need to look at it again (very closely). I think I may have used one as a ground. I'll let you know what I find. Thanks for the reply!
@jeremyrigged10 жыл бұрын
moomert1 So, I am able to get it working, but the video gets wavy and then it appears that the adapter resets (Screen goes black and the Asian writing pops up). Any ideas? I have tried different power supplies to makes sure the amperage was correct too? Thanks again.
@moomert110 жыл бұрын
Jeremy Marshall Did you make sure the power supply was putting out the correct voltage? On the downside, some of these adapters have been known to have issues. Do you have another cab to test the convertor with?
@GeertCallebaut7 жыл бұрын
Thanks, I have two connectors: a 5 pin (R, G , B, black, brown) and a 6 pin (R G B black, purple, white) Which ones do I use?
@moomert17 жыл бұрын
The 5 pin is probably best
@Penfold810 жыл бұрын
Can you run a VGA cable to the "in" from a computer and another VGA cable to the "out" to the monitor, or is there another input that I need to take into consideration for my MAME cabinet?
@moomert110 жыл бұрын
Why would you need a convertor for VGA to VGA? Are you planning to use a computer monitor or a tri sync arcade monitor?
@Penfold810 жыл бұрын
moomert1 I am trying to go to CGA so that the arcade games I have won't look so pixelated and blocky. (I am using a computer monitor) I thought the signal that was coming out of the computer was CGA when emulating the game and that's why it showed up so blocky. If this is not the case, what can I use so I can smooth out the graphics on the computer monitor?
@moomert110 жыл бұрын
The only thing I could recommend would be to use a tri sync monitor. I had a MAME cabinet and I used a tri sync (vga connection) and the graphics were not blocky.
@moomert110 жыл бұрын
Penfold8 Also, if another type of convertor is available, you might try asking user YourMKArcadeSource. He might know the answer.
@Penfold810 жыл бұрын
moomert1 Sorry to bother you again, but did you use the CGA VGA converter board WITH the Tri snyc or was the CGA/VGA converter just not used. BTW I appreciate you answering my questions.
@Videogamerdaryll8 жыл бұрын
When using this for a vertical monitor is there any difference or can I still use the same converter
@moomert18 жыл бұрын
Videogamerdaryll should be no differance
@howardmalone37 жыл бұрын
Got mine running on my raiden 2 cab no problem
@kenmcmaster69382 ай бұрын
where can i buy it?
@moomert12 ай бұрын
Ebay, AliExpress.........maybe even Holland Computers
@auxproxprox52527 жыл бұрын
Hi moomert1! Thanks about the video! I have a question. Do you experience lag on comand responses when using this board?
@nexusofice91356 жыл бұрын
I have played many fighting games on this thing and I think it only has 1 or 2 frames of added lag. 100% playable and I don't really notice it.
@moomert112 жыл бұрын
@MrJimits Well I can't say for sure since I don't know what your current hardware consists of. However, assuming you have a cabinet that was built up from nothing to be a Mame cab. You will need a power supply, jamma harness, cga to VGA adapter (if you have a VGA cab). In my opinion you should keep your Mame as a Mame cab and buy another cab or straight jamma.
@xyxtheowl11 жыл бұрын
I'm a noob...how do I do that?
@cncmeredith8 жыл бұрын
In a two monitor cabinet like my 4 player cyberball game do you need two converters or is there a way to connect both to one?
@moomert18 жыл бұрын
cncmeredith I really can't say for sure. I have never owned a 2 monitor cab. however I would imagine that if only 1 set of wires hook ups for to one monitor, then the pic gets Daisy chained to the other monitor some how, I would think you only need one of these units
@moomert112 жыл бұрын
@k1701e Hopefully this will help you with your cab.
@chunkis0011 жыл бұрын
Hi, i have a sega naomi universal cabinet, monitor 31k only, can i use this to play jamma? Also does it lag? let me cheers
@latenightboycampos870511 жыл бұрын
well i have 3 of these scalers none defective its just that simpsons board you use in the vid does not show screen tearing but try using the rgbs or rgbhv input and let the tearing begin
@AkebonoRadio8 жыл бұрын
Will this convert vector to vga?
@moomert18 жыл бұрын
Gregory Monivis Jr I don't believe that's possible.
@JK-dz8pn10 жыл бұрын
Can you please tell me where to source the white plastic mounting feet you have on the board? Thanks :) EDIT: No worries I found them on Ebay :D
@mustangmarcus3024 жыл бұрын
What are they called
@DJKATELLA12 жыл бұрын
Ive seen your garage setup with the SIMPSONS and the Lard O Lad toy on top for sale on craigslist! I thought your garage looked familiar!!! Ive seen your posts "FOR SALE" on craigslist...small world!
@hotcuervo6 жыл бұрын
what lcd monitors do you use? I have a arcade cabinet with a 25" crt monitor and was interesting in swaping the crt monitor with an vga lcd monitor but I'm not sure what lcd to get. I want something that will keep the original picture of the crt monitor. Thanks for your time.
@nexusofice91356 жыл бұрын
Biggest 4:3 LCD I have ever seen is a 20inch. No the picture will not he the same on am LCD compared to a CRT. You can get a wide screen TV and shove it in there but be prepared to make sure it fits. And just force a 4:3 picture on it. You can get around a 23 inch 4:3 imagine on a wide screen TV that can fit. Good luck. BTW if your CRT works.... I would not bother replacing it.
@nexusofice91356 жыл бұрын
Does your CRT work right now?
@00squintz007 жыл бұрын
Will this work for a 2005 golden tee?
@nexusofice91356 жыл бұрын
Yes. It should. But be prepared for a smaller screen size.
@latenightboycampos870512 жыл бұрын
He doesnt mention the screen tearing
@kaiju_is_dead7 жыл бұрын
Is there any noticeable delay from inputs?
@howardmalone36 жыл бұрын
use mine on raiden 2 cant tell of any delay
@jasonkhammo92757 жыл бұрын
I have an old Area 51 arcade game meaning it is a light gun shooting game. Question is is will my guns work on an LCD or computer monitor question
@moomert17 жыл бұрын
Jason Khammo for Area 51 you need a crt monitor
@jasonkhammo92757 жыл бұрын
moomert1 That's what I thought thanks
@mikerhoads48647 жыл бұрын
Will this work for MK1 , 2 , 3 ? I hear those run at like 15kz refresh or something and does not work on a lot of monitors.... thanks
@howardmalone36 жыл бұрын
you have to change the vertical position to above 25 number mine was freezing on raiden 2 kzbin.info/www/bejne/bZWxdqCIq92JnJY
@DegenTillWeWin7 жыл бұрын
will this work to convert a VGA signal to a arcade monitor 15khz? and is there a power light or anything to know that iots working or not working?
@moomert17 жыл бұрын
Noah Bagdonas if I remember correctly this will work
@DegenTillWeWin7 жыл бұрын
moomert1 OK weird cause I have a Pandora's box 4 hooked up to it through VGA and when I hook up to my trimode arcade monitor 1 15/24/31hz everything just shows up scrambled and green. no picture... Humm a red light comes on on the board is that normal?
@DegenTillWeWin7 жыл бұрын
I can't get it to display... The screen just turns bright green on my CRT monitor. No matter the source is going into the board from VGA
@moomert17 жыл бұрын
Noah Bagdonas are you using a pandoras box adapter? I'm assuming you are running game this in a Jamma cab?
@shawnpowell461810 жыл бұрын
I have 12 arcade games in my home collection. Three of them are having monitor issues. Area 51 is one of them. A neotec 25". Gauntlet Legends 27" neotec. And a hydrothunder which runs straight to VGA without any converter needed. 47" Vizio. Just to check if PC based arcades would run straight too VGA TV @correct range. So, what are people doing? Using a remote control to TV to turn it on after cutting on arcade games? Or are you referring to buying an LCD from somewhere particular for arcade games? just seems a little ghetto having to use the remote and hope that it isn't covered to cut the TV on. Just wondering what people are doing. Thanks
@nexusofice91356 жыл бұрын
Area 51 is a light gun game... LCD monitor will not work with it at all.
@moomert111 жыл бұрын
That I do not know. Your best bet would be to ask fellow youtubers ctozzi123 or YourMKArcadeSource. Those guys know a lot regarding MK boards.
@xyxtheowl11 жыл бұрын
Do you have any problems with this product? Plz, check out my video response. When there is a lot of action and music on my screen it goes blank for a couple of seconds. Also, I use a video converter to change the vga to hdmi...Can you help me?
@rchung2912 жыл бұрын
I'm wondering if you can help me out. I made a video response thanks
@BackXDash11 жыл бұрын
Thanks for answering. Well I searched a little bit and found a vid and looks like the ones selling at Jammaboards have this updated firmware to them, which make the MK as well others low frequency boards sync properly. I'll give a try since I'm just tired of spending time/Money with my arcade monitor/tube, better stick with superguns.. Thanks again.
@Videogamerdaryll8 жыл бұрын
Great video
@alpinball412310 жыл бұрын
Latency of 25msec not that great for fast action games,also gun games that sense off the screen won't work.
@BackXDash11 жыл бұрын
Bought one, finally arrived, and guess what? For fast scrolling games like shooters, the screen atempts to sync every 3 secs or so, causing a little "skip". It's almost unnoticeable, but gets annoying for a while. The image is beautiful however. For me, it's okay for fighting games... but unfortunately, I feel like throwing my money away. Again.
@moomert112 жыл бұрын
@lukemorse1 It's been awhile since I uploaded anything. Hopefully this vid can help people out.
@moomert112 жыл бұрын
@dextercf That's why I started makings vids in the first place.nback when I first got into arcades, there were no simple easy to understand vids.