Arccaptain VS Yeswelder | DIY Stamp/Press |

[@LightaFire_studio]

*Correction! At about ‘7:20min’ I claimed Yeswelder was 220V Only, I was wrong it is dual voltage (120v/220V), and did come with a pig tail.

[@johnhowe1546]

Welding is an art. Cool to see a video with welding FOR art.

[@yenerm114]

Weird mine is the opposite has 220 plug and you can neck it down to 120 , wonder if they’ve just recently changed that? Either way I’m very pleased with mine , most ppl don’t say anything about changing the pre and post flow in the settings on the arc captain along w other things, with the machine off , hold the middle button on the right before you turn the machine on and it will come to I think 7or8 diff settings you can change, it’s in the booklet but a lot of ppl don’t mention this

[@Boodieman72]

My Arccaptin Mig200 came with a 220V plug and a 220v to 120v adapter.

[@MithykalGaming]

is it still working? just got mine kinda sketched out might refund since i got it warrantied through amazon

[@R.Stridstrom]

Actually you mentioned you did run it in 220V. Try to trick it by selecting 1mm with your 0.8mm and see if you can boost the Amperage.

[@jeffgood6441]

Smart thinking my man

[@R.Stridstrom]

@@jeffgood6441 Thanks.

[@rogertaylor8615]

The arccaptin has a light inside and yes you can change the liners but you can get a spools gun for aluminum and it will take 40 lb. Spool of the small rolls

[@davidanderson3999]

Nice vido and build, I just got my arccaptian 200, have not used it yet, was wondering what size kendorff that was that slides inside each other, thanks

[@MithykalGaming]

is it still working? just got mine kinda sketched out might refund since i got it warrantied through amazon

[@1978garfield]

I don't like that you can't run 200 amps with .8 wire. Other than that minor issue it seems to be a decent machine. I see in the comments you can get all 200 amps if you tell it you have 1mm wire loaded so it isn't a big deal. Would love to see you connect an ammeter to the output and compare actual amps to the number on the display. It seems Amps are much smaller in China.

[@dandahermitseals5582]

Are you running this machine on 120 or 240 ??

[@WalterBarger-io9ck]

Go out and get yourself a bottle of c25 you'll see a big difference from the CO2 oh at the end of the whip that goes into the machine that is a European connector the arkcaptain that is much better than the yes welder hands down remember pick yourself up a bottle of c25 and always remember when your welding stir your puddle if you need any info I've been welding for years

[@todds5956]

25/75 should be your gas. Use 1 amp per .001”

[@R.Stridstrom]

About the Amp-cap - thats because you only got an adapter for 120/220V - it wont give you the maximum with 120V. And i think you have to set it to 1mm to get it all, also. I have to mention one thing, not meant in a bad way. You guys uses imperial standard, together with Liberia and Myanmar - (even though some companies migrates towards the metric standard these days) and 120V. Like some of America. But the states represent like 4.2% of the world population, so it makes sense that they look at the bigger picture. Maybe you should too ? :) And it will all be fine and dandy.

[@LightaFire_studio]

Thanks for the feed back, always appreciate good useful/constructive comments. Take Care! 😁

[@rogertaylor8615]

They do sell a better torch for the arccaptin

[@WalterBarger-io9ck]

Sorry for the spelling mistake supposed to say at the bottom Appearance and penetration sorry for the mistakes my phone's a piece of crap

[@WalterBarger-io9ck]

Yes welder you can polish a turd but it's still a turd

[@LightaFire_studio]

If you polish hard enough it can shine like chrome, lol

[@WalterBarger-io9ck]

Awesome answer🤣🤣🤣😎🙏🇱🇷👊👍 you have one awesome show

[@WalterBarger-io9ck]

Yes welder absolute garbage the company wouldn't even stand behind it

[@Wh1teGor1lla]

Nice opinion but you state no facts as to why. It’s no help to people looking to buy something when people just say it’s awesome or garbage. Leave some facts and thoughts on why!

[@jeffgood6441]

Yea I really want there new tig acdc tig p machine but I also see a 300 amp safeup welder that looks amazing too

[@looseballs1966]

@@jeffgood6441 Don't be affraid of yeswelder they are damn good machines for the price or even more, I have the yeswelder MIG 250 pro SG and the CUT 65DS and they are not bad at all and in a couple ways are BETTER made than my Lincoln 135 in build quality, I know this is an old post but it just pisses me of when some jackwagon like mr walterbarger up there makes some broad B.S. statement with no backing facts and most likely is nothing more than some immature man child dink living in his parrents basement and most likely doesn't know his ass from his elbow about the subject because at best maybe once or twice daddy let him try to run a bead with his old dinosaur AC stick machine, I just happen to own more than a couple welders, (a Lincoln ac225 "tombstone", an Airco 180 stick, Lincoln Mig 135, a very old Mark5 110 ac stick machine that welds like a dream, a yeswelder arc 205 stick machine, the yeswelder 250 pro, and an old Lincoln 250 Ideal arc AC/DC with a high frequency AC/DC tig converter, and also a Miller 225 thunderbolt stick machine, and the yeswelder holds it's own and does a couple things better than any of those others.