Archicad 21 accessories wall addon GDL using AC profiles

[@ma10aspeacenose55]

Thank you so much Hemio! I tried it out in AC 25, and now I can easily model sidings wich I've usually done with individual beams and boolean obj. for every single opening.This saves time and keeps the size of model down.

[@izoyt]

Hi. Very nice tutorial, can you also make english version of making gdl wall accessory first? Can this procedure be used also in v.22, since profiles are redesigned?

[@calina.2550]

Hallo, Heimo! My question is how did you create this profile that you uploaded in dropbox?

[@WillConway-hc5ic]

Thank you for the tool, how do you proposes its used on wall with a sloping top?.. SEO does not seem to have any affect.

[@yegorartyukh8292]

Hi! Thank you for sharing this amazing tool and your tutorial. Let me ask if there is any way to make the pattern start from a different end of the wall? For example, once you apply the pattern to the wall, it always starts to be built from the left end of the wall. What do I do if I need it to be snapped to the right end, so I had a pattern's parameters to the left side of its starting point? Apparently, mirroring and an object's own settings do not work in this case.

[@Skawagon]

This is a superb and very valuable tool, thank you for sharing it.

[@flavio_italia]

Thanks! Helped a lot.

[@matsknutsson114]

Really handy and nicely executed!

[@tanumakinen]

Hi, I am using the start edition version. Full version files will not open in it. Would it be possible to get just an object that could be added to the library?

[@rosskirker957]

Hi - thanks for this tool. I'm having trouble adjusting the joint width between profiles however - the parameter doesn't seem to work?

[@bjrnarkvalen7475]

Werry exited about this tool. But Ive been tying to use this in AC24, but I can only get it to work partly on one side of the building. It places the profile inside the wall most of the time. Hmm.

[@takisapostolides412]

Heimo Hi, very intelligent tool, is not working with Archicad 24, could you check this out and fix it for us please? Thanks.

[@haymont78]

Great little handy tool. Thanks so much for sharing. Would love to see an english version to make it a bit easier for me.

[@RamseyDjSikaZulu]

Good day @Heimo, hope you are well and safe. Was a solution for this Add-On found for Windows PCs? I would appreciate your response and assistance. I'm working on ArchiCAD 25 on Windows. Thank you and keep well!

[@MooslechnerH]

It does not seem to be a problem with the Windows-Version. It seems to be a problem with the language-Version or the localization-country-version of Your Archicad. Here in Austria it works on both windows and Mac. More, I can't help you. Sorry for this. Thanks for the health-question. All's safe here, but in Austria now the government is closing down all alternatives to the mandatory Covid-vaccineation step by step - which I personally see as a foundational injury of my good health so far.. We'll see..

[@RamseyDjSikaZulu]

@@MooslechnerH None the less, Thank you very much for responding to the question. It's highly appreciated! Keep well!

[@Mixtarch]

Help... it keeps placing the cladding on the wrong side... opposite side i want to place it thanks...

[@MooslechnerH]

This old object - in these days, I didn't know much about the Addon. Workaround: Just draw the source-Wall from the other side - not from right to left, but from left to right. Then apply my object - this should help fast. But I will have to code it from scratch new, I think.

[@biberuye]

the extra accessories options in the design extras menu are not visible for me. i can only see truss maker. i use AC25

[@MooslechnerH]

Did you download and install the "goodie"-addons from Graphisoft? Without this and without the additional load of the addon-Library it won't appear or work. graphisoft.com/us/downloads/goodies

[@biberuye]

@@MooslechnerH yes i did and activated the addon but I can only see truss maker in the design extras menu

[@MooslechnerH]

@@biberuye Then i am sorry - I can't help you - talk to your local support.

[@biberuye]

@@MooslechnerH Hello again. I tried again several times recently and adding the accessories commands manually works. thank you for your responses! I just wanted to add this here in case someone faces the same problem. ( Work Environment > Command Layout Schemes > Menus, change the List to All Commands by Theme, look at 17-Add-Ons, the commands for the add-ons are here, you can then add them to your Work Environment.)

[@a.muller908]

Hallo Heimo. AC 26, eigenes Profil im PM erstellt (Stehfalz). Problem: die Fenster und Türen werden nicht ausgeschnitten. Ich habe verschiedene Wandtypen, verschiedene lage der Referenzlinien, verschiedene Fenstertypen ausprobiert aber es ist immer das Selbe. Einmal hat es geklappt und die Fenster wurden richtig ausgeschnitten - ich weiß nur nicht warum, wieso weshalb es dieses einmal funktionierte und dann nicht mehr. Wo liegt mein Fehler? Danke

[@MooslechnerH]

schick mir das File zb. Dropbox-link..

[@MooslechnerH]

So gehts dann - zumindest bei mir.. Allerdings - Dein Profil schlägt ganz schön auf die Performance... kzbin.info/www/bejne/l2eaaaCkqcqHqM0

[@Black7apex23]

Hej. Please if you can help me on how to make that incision like you did on the left-most white wall. I need to do a 3D print and i need my wall to have incisions that show the bricks when printed. >Thank you!

[@MooslechnerH]

Did You download the Edu-File from my dropbox? Did You trie it? To get the look for a brickwall - maybe it would be better to draw it exactly with morphs and subtract it by SEO, because of the much better control of the exact structure and measures. ..

[@remikp]

Hello, this tool is great!! for me must have. I have small problem. It would not work on some sides of wall. For example it only works on north and west elevation. The other only inside building. Any ideas?

[@emmahoward3608]

I have the same issue. Did you find a solution to this issue?

[@remikp]

@@emmahoward3608 Hmm I am sure I did.. but really dont remember how.. I think I tried to copy wall with panels and then rotate it or something like this. plawgo.com.pl/parterowy-dom-jednorodzinny-gdansk/ this project was done with this GREAT addon

[@revivre-en-mieux]

Hello. Thanks for this great video. I am looking for a solution to be able to use Your accessory on archicad 23. Do you have an answer for me as well as a file to download which would be compatible with archicad 23. Pending your answer I wish you good luck. Cordially.

[@MooslechnerH]

trie it. But the addon from Graphisoft must be installed too.

[@revivre-en-mieux]

@@MooslechnerH Ok thanks for your very quick response. I will therefore install the GRAPHISOFT add on in full and test this accessory under ArchiCAD 23. I will return to your channel depending on the result. Good evening to you.

[@yavormindalov2877]

I installed Goodies addon but I still don`t have these accessories. PLS Help!

[@MooslechnerH]

If You installed the goodies AND loaded my dropboxfile - it should work like in the Video. In my dropboxfile, there is a Library included with this GDL-Part which accesses to the goodie - wall

[@yavormindalov2877]

@@MooslechnerH I have downloaded the dropbox file but I can`t open it. Maybe because it`s a backup file but when i try to load it it shuts down right away and sends a bug report.

[@MooslechnerH]

@@yavormindalov2877 I tried it now on my brand-new Macbook M1 on Archicad24 EduAut and it does it all as intended. Will Test it tomorrow on a windows-Computer.

[@yavormindalov2877]

@@MooslechnerH Thank you for the quick replies. I hope that I am missing something but when I try to open the dropbox file or load it into an already open archicad project Archicad instantly crashesh and sends a bug report.

[@yavormindalov2877]

@@MooslechnerH Have you managed to try it on windows pc ? I still cant open your dropbox file. When I try to open in or place it in my archicad file it crashes instantly and sends a bug report.

[@Constantinesis]

Hello, the dropbox link doesnt work. Is the plugin still available? I would really need it!

[@MooslechnerH]

here is a new one..kzbin.info/www/bejne/nXrGi4mubb2epbM

[@Constantinesis]

@@MooslechnerH Thank you! Awesome work !

[@pedrohenriquefigueiredomag6849]

Hello Heimo ! These objects are great. I have tested the file you provided and I they update fast and I found them very useful. Do you plan to release it soon as a free (or paid) object?

[@VIA-studio]

Hallo Heimo! Vielen Dank für das Tutorial. Finde die Idee klasse, habe nur selbst keine Ahnung von GDL. Baue mir das Stehzinkfaltblech immer aus Morphs zusammen. Leider klappt dein Dropbox-Link nicht. Würde dein Add-On bzw. deinen Code gerne mal testen.

[@MooslechnerH]

nachgestellt. www.dropbox.com/s/kf0ya8nxvww3nb2/Fassadenpaneel-Teilungen%208.bpn?dl=0 mir wirft Dropbox mal was raus, wenn ich drauf vergesse und was ändere..

[@VIA-studio]

Vielen Dank dafür! Meine nächste Frage wäre wo genau ich das Wand-Zubehör Add-On herbekomme. Ich finde es jedenfalls nicht bei den Add-Ons auf der offiziellen Graphisoft eite. Oder ich habe nicht gut genug geschaut. Aber ich wäre dir sehr dankbar, wenn du mir den Link schicken könntest. Ich habe ürbigens am gleichen Tag ein Video zu Wellblech veröffentlicht und viele Fragen danach wie man das Wellblech nicht als Morph, sondern als Wandzubehör ausbilden kann. Wenn es echt ist, verlinke ich dein Video einfach unter meinem.

[@MooslechnerH]

www.graphisoft.com/downloads/goodies/index.html und wie meinst Du - echt?

[@VIA-studio]

Und nochmals vielen Dank!

[@lucasprille4201]

Please link to .gsm file. Thanks!

[@MooslechnerH]

Open the Archicad-File within Archicad - it switches To Edu-mode of course (You pre-Installed the Addon from Graphisoft). Then - mark the GDL-Library-part in the Project and then-"library and Objects" - "open Object" - "save as (external file)" - and You can use it in any other Non-Edu-Project after loading the gel-file as Library-part..

[@lucasprille4201]

@@MooslechnerH thanks you so much, I having issues opening the file but I think is lenguaje compatibility. I will try to fix it

[@antongerasymovich4876]

doesn't work with Profile wall :(

[@MooslechnerH]

in 26? have to test myself. Did You install the Goodies for Archicad and did You Load the library?

[@MooslechnerH]

i testet it in 26 - works fine. Did You follow the description above? My dropbox-Link - You should rename the*.bpn to *.pln - but others made it by themself..

[@antongerasymovich4876]

@@MooslechnerH sorry, there was a mistake in a word. I meant it works well with all walls, but doesn't work with a wall that made via profile manager (complex profile wall)

[@antongerasymovich4876]

@@MooslechnerH AC 25

[@antongerasymovich4876]

@@MooslechnerH yes, installed Goddies, I have library (three files: Wand_Paneelfugen und Trapezblech für Zubehör-Addon Wand_Paneelfugen für Zubehör-Addon Wand_Paneelfugen A für Zubehör-Addon ) . The other issue - what should I do with this file: Fassadenpaneel-Teilungen 8.pln ?

[@farhadmajzoub7941]

i have download accessories and install goodies but these forms are not added in profile manager list .please help me.

[@MooslechnerH]

Did You download my Dropbox-Edu-File also? The needed library parts are embedded there. You can extract the Library parts form there for commercial use. Just open the librarypart and save it extern. Then You could add this part to other pla-files.

[@farhadmajzoub7941]

how can i get it?

[@farhadmajzoub7941]

thank you very much i downloaded your drop box . is it possible to have it in INT or English ?

[@ogdandarkage8576]

@@MooslechnerH helo, can i use your file with arch 23? Second, if this posible, please be kind and explain to me step by step how to add your already downloaded file into arch 23 accesories library. Thank you in advance!

[@remikp]

@@ogdandarkage8576 It works in AC23