Arctic Cat Prowler 700 XTX

(Turf Saver Repair) I replaced the rear end gear and axles to remove the turf saver and make it a posi tract. This stops the jerky starts.

[@dougwitten4714]

We used your video to repair an axle that popped "out of socket" due to a flat tire. REALLY appreciate you taking the time to make a video related to this.

[@pulleyland2768]

Great help

[@user-tb4un2gq5d]

Hello USA. Nice video!

[@jime382002]

Just ordered today. hope the parts work. will comment again when I get it put together. Gear, ring & axles are now $374.50. Arctic Cats quote for replacement + labor = $2100.00

[@MrNotch35]

+Jim Hansen I hope it all turns out well. My Prowler is working well and I like the outcome.

[@Jacksonransom]

Any update?

[@marilynboggs6734]

Can anyone tell me if this gear (Part #1402-032) will fit the 2008 Arctic Cat Prowler 700 XTX?

[@onamrivas8528]

Why does it say when I want to order rear axle it says for xt and xtx model so it’s the same axle or what ?

[@GRUPOSRNOGALES]

2008 Arctic Cat Prowler 700 before after 3 seconds run and instant let the gas free and stop in seconds that was before now stay in neutral only.

[@MrNotch35]

The axle and spindle if for the XT model.

[@billcorbit4483]

tom than for the video I have the same exact model and have ordered the same exactparts but the axles seem to be too short they fit into the spine but there is about 2in of play. and no body can seem to help. thanks bill

[@MrNotch35]

Hey Bill, if you measure the overall length of the axles. Do they measure the same? And you did order the rear gear? I am wondering if the axle part # changed.

[@billcorbit4483]

Tom, I believe the gears match up except the new gear has a larger inside diameter. The axles when placed side x side the new one was about 1/2in shorter. But when installed there was to much play in the axles

[@MrNotch35]

+Bill Corbit well it sound like to rear gear might be the wrong one. It might be that they got the part number wrong

[@kipchaa8423]

My axles are too short also I did the same conversion

[@noelfranco5224]

are the axles for the XT model too

[@ryleegraham7560]

does anyone know if the whole diff out of another machine like the hdx or xt fit in the xtx i have a 14 700 xtx

[@MrNotch35]

I haven’t looked at the part numbers but I think the xt would be a replacement. I used the differential for the xt.

[@garyhoneycutt4792]

About how much is this to do?

[@MrNotch35]

I’m sure the cost has changed, but it cost me about $550 when I did the job.