Arduino Tutorial 06: Processing

[@DustinWill]

I am blown away that I just discovered Processing YESTERDAY!!! Wow, this opens up whole new rabbit holes to get lost in!!!

[@techtheguy5180]

Me too!it is amazing!😀

[@ahmedmk8227]

And I discovered it 11 months after you 🙃

[@xcal123]

I found Processing TODAY, and am happily lost in a hole :)

[@mylesterrance5924]

Dont know if anyone gives a damn but if you're stoned like me atm you can stream pretty much all the new series on instaflixxer. Have been watching with my brother for the last weeks =)

[@johnnyesteban89]

@Myles Terrance yea, I've been watching on instaflixxer for years myself =)

[@fatenhappy1]

Although having been in electronics all of my life (40+ years), I am new to the Arduino family and process writing. I really do appreciate your efforts in presenting this series of videos ....

[@LaurenzEdelman]

This is exactly what I need. I don't know why I have not found Processing before but I am glad I did now. Very fine tutorial for a first time introduction.

[@savagerodent7533]

As always the content is interesting and informative. Although the shear number of "errs" and "ums" on this particular video does make it rather jarring to listen to.

[@aivaraspetrikas15]

Thank you! You deserve more views :(

[@aivaraspetrikas15]

***** do you know why it's saying: unexpected token: Serial ?

[@aivaraspetrikas15]

AwFro nevermind, stupid me doesn't know how to copy right :D

[@minutevariance4946]

Your tutorials and website are brilliant - thanks so much for your hard work!

[@aofddofa6661]

one more time: >>> Your tutorials and website are brilliant - thanks so much for your hard work!

[@LegendOfKarogane]

FINALLY ,THANKS AMILLIEEE

[@MrJewvicast]

Great video mate thank you!

[@xcal123]

I am so late to this party, and it's still fun:) Should I have both IDE's running at the same time? arduino and Processing. or only the Processing IDE? this is a great tutorial. thanks

[@a01r]

thank you so much for this tutorial 😍😍

[@hadimajdi9272]

thank you very much

[@sonogenio]

Bravo!!! complimenti!

[@prasannaashok9879]

Great 👍👍

[@NikhilDRaikar]

👌keep uploading,this is very helpful.

[@Paulzmusic]

a great Tutorial, thank you!

[@diego.alienigena]

very helpful, thank you!

[@SUSMITRUDRA]

UnsatisfiedLinkError: 'long jssc.SerialNativeInterface.openPort(java.lang.String, boolean)' This error is coming when I an running the Processsing code. (The code has no error) What shall I do to solve this problem? Please help.

[@connectandcontrol1063]

@1:03 Arduino programming language is not based on processing, arduino uses c++ while processing is based upon java.

[@premprasad3511]

Arduino is based on processing my dear friend..it is written in C++ true, but the program structure follows processing

[@vidhatrisamadhiya4599]

awesome bro

[@tamarun1223]

what is the com port for MAC?

[@petrostoupas4010]

Really nice work it is very helpful. Can i use serial communication and processing if i use Intel Galileo 2n Gen? It operates in the same way?

[@backgroundgenre]

thank you

[@Bravo141-6]

question please does the processing ide need a separated input or it works with the arduino ide input

[@tharunbatti2116]

Can we connect 2 colour sensors to one arduino board

[@gundamlh]

Thank you for sharing such an awesome project! I've a question: Does the library ("serial.*") in processing handle reactions to the mouse behavior? And is the mouse connected to your PC rather than to the bread board and arduino?

[@hagar8285]

thank you very much , I will be great if you put the link of downloading the processing development environment

[@ChoudryArif]

thanks

[@BradleyCodes]

When I try to start the processing code, it says that the COM port is busy and can't be written to?

[@manuelvichique1624]

Bro,may use my arduino uno for this? :D

[@melhoresjogosdomundo777]

you master

[@gergostomfai6253]

Hi! If you write an '1' on serialport from pc, and then the arduino write to the serial anithing, when pc reads it it read "1The Button is pressed" no?

[@hagopjaner8347]

hello how i can transmit data from one arduino to another with hc 05 (one yaw communication)

[@ranjith7249]

Hey bro I have done CNC but in processing ide after streaming an g code the the steppers starts moving But at last showing M18 drives off Command not recognised Could u please help meee how to fix

[@lpetrianou]

Hello! Your tutorial was really helpful! I just had a question. Im currently working on my project at university in which i have to use a pressure sensor and send a message to my pc to activate live picture from streaming and play it on screen. What code should i use in order to achieve this?

[@miltonsturell3239]

Did you fail?

[@fatemaissa8559]

Whats is the function of "this" in the programing Processing

[@manasbuzruk7472]

I think its the 'this' pointer used in oops

[@pravin214]

Upload the ardino code or processing code or both in aurdino.

[@Ncky]

Is that Dell XPS series?

[@wotesi]

Please tell me how to find out what port number is it in Ubuntu? How to find it out? In Windows it is COM3, but what number in Ubuntu Linux? Thanks

[@tecnologiaac6940]

hoooo me gusta very good

[@sayantanmaiti2513]

I can easily send values of two or more variables of from processing but how arduino can recognize all the values seperately? please give me some hints..thanks

[@sayantanmaiti2513]

Thanks a lot Sir!

[@4MyStudents]

digitalWrite( led, HIGH)

[@DevineIshaq107]

My first experience of Ardunio/Processing went successful, GY80 10 D.O.F (processing Please) gy80.pde

[@DevineIshaq107]

***** I also managed to open some examples ,modify them and see effects, My aim is to get the Graphic interface of GY80 triple axis sensors and then start feeling a little better. Do Post a tutorial , as I am following you like duckling follows the duck

[@akshaydasm.k9388]

is it possible to get the arduino and pde communicate wirelessly?

[@TheVintageViking]

Of course

[@ram__ghanem]

I dont understand when I was about to extract it to the desktop, It said smthing that I should have a license for Wfar smthing like this and I have 40 days trial????

[@ram__ghanem]

+Dejan Nedelkovski I did , but sir just 1 last thing. I have copy pasted the code of the processing one and paste it. Yet I got this error for some reason. Error opening serial port COM4: Port not found. I dont know what do they mean sir. you wrote the code as follows myPort = new Serial(this, "COM4", 9600); AND further more please, I have to upload both processing and the arduino code ? like I paste both codes on their special place and upload them to the board if yes please let me know because your project blew my mind from excitement thank thank you dear Dejan

[@ram__ghanem]

+Dejan Nedelkovski ok I hve pasted the arduino code and it is working nicely, yet the processing problem not yet solved thank you sir

[@eempie105]

+Devilish BETTA Have you filled in your own COM number? You can see this in your arduino program. Go to tools --> Port, and watch witch number is selected. Now, instead of the 4 fill in your own number. The arduino program should be uploaded to your arduino. The processing program is just running on your pc giving directions to the arduino, so it should not be uploaded to the arduino. Just click the play button on the processing window and you are good to go.

[@ram__ghanem]

I did it and it worked thank u

[@franciscofigueiredo4793]

i need to download processing software? thank you

[@eempie105]

+Francisco Figueiredo Yes, you should. It is free.

[@zebratangozebra]

Processing is great but I don't see how it can be used with the Arduino IDE for anything useful.

[@SLRNT]

you get to make a gui for automation, air conditioning etc. so it's pretty usefull

[@winterwren8707]

6:22 how do you do it on mac? Plz I have been trying for days!

[@manraj6493]

I can help you with that I know its a year late but still haha, So basically you want to have your arduino plugged into your mac then open up the terminal. Make sure when your doing this there isnt anything else connected to through another usb port. Then you are going to have to type this exact line in (without the quotations) "/dev/tty.*" Then it should show a bunch of ports, you are going to have to select the one that says usb modem. All the way from the / to the absolute end of it. Then you should copy that and paste it instead of COM4. Hope this helped

[@winterwren8707]

@@manraj6493 oh my god I forgot about this comment but thanks!

[@pahvalrehljkov]

cist_bez_text

[@BullDogg101]

This, uh, is, uh, how, uh, to, uh, do, uh... Finding an old video is strange, atleast your newer videos sound more rehearsed and certain xD

[@mansoorramizy9801]

U didn't said anything about wiring it

[@mansoorramizy9801]

+Dejan Nedelkovski okay thnx man

[@hiwotyirgu8099]

He says "uh" 3 times a sentence! Does no one notice uh notice uh that?

[@qoutroy377]

no, it's ÖÖÖÖÖÖÖÖ :P

[@domnulvlad4471]

Well, he certainly isn't a native English speaker.

[@matheuscardoso1]

So he isn't a native english speaker. Whats the problem? He's doing a great job teaching, anyway. Please do not focuse on that.

[@holyproton8855]

who cares? Its hard to present properly and have massive knowledge at the same time. Why don't you try posting a video?

[@skibsted123]

Thank you so much