Arduino Tutorial - ATtiny85 explained in 4 minutes!

Instagram: / thatmartinvrn_
KZbin: www.youtube.co...
Command : raw.githubuser...
Article : highlowtech.org...
Instructables code download : www.instructab...
Here you have the comprehensive starting guide to the Attiny85 microcontroller compressed into a short but detailed video that covers everything from configuring you Arduino as ISP to Uploading some working code.
Part 1 : • Arduino Tutorial - Ard...
Part 2 : • Arduino Tutorial - Dig...
Arduino IDE download : www.arduino.cc...
Equipment Used:
Camera - Canon PowerShot SX530 HS
Microphone - Samsung Galaxy A5
Tripod - Velbon EX-230
Music used: Ecstatic Wave by Jens Kiilstofte

[@shade0110]

Hey Adio_! Thanks for the easy tutorial! I was about to go NUTS trying to get this to work! More than that, I was looking for an easy and explainable way to do this and do it right! And, thanks to you, I was able to achieve that! Thank you so much for your help! I have several of the ATTINY85's and now I'm going to enjoy programming them, not to mention how much fun I'm going to have with these!

[@klsar1]

You just encouraged me to order ATmel Tiny85. Now I can't wait for the chip to arrive.

[@gavquinny]

Same - TY!!

[@ih4286]

I've had 3 of these chips for ages and now I know how to use them so thanks😀

[@mikewhitaker4150]

Nice job explaining the ATtiny85. Now I want to get one and play with it, you made it look easy!

[@HanshaniLavanya1]

Please upload more. This is a long break

[@devdylan6152]

if you hit 2x speed, its only 2 mins

[@espeach2153]

Thanks! I ran into error "avrdude: initialization failed, rc=-1" during the final sketch upload but I fixed it by connecting 10uF capacitor between RESET and GND on the Arduino Uno.

[@ahmedhassan-rt1mx]

Iwi www iaiwooaoqioqiqiauuiUi׶oqqo8@19£~1@9oqoOQOoqaq ooms.aqWqaaaaA, awesome awoqaqaaqAa

[@ahmedhassan-rt1mx]

OqaiAqoa8111119o

[@newt9908]

Quality content + no cringe intro = sub

[@crckdns]

Meanwhile the URL got changed as the old project deprecated. The new project is called ATTinyCore and has more supported boards and even support for I2C, SPI, UART (via USI)

[@Reach3DPrinters]

Beautiful presentation. Thanks.

[@InterdimensionalWiz]

SPON ON! excellent video. 4 minutes....perfect.

[@yendersonmayorga8363]

Me encantó que tiene subtitulos en español

[@arbaazkhan326]

i have a problem i want a servo motor to operate in 2 different speeds with 2 diffrent clicks on button for example normal 120 degree rotation speed at single click and fast 120 degree rotation at double click using on off tactile switch using a cr123a battery.all these using a pcb or arduino in the most smallest space.is it possible?

[@Imnotlucaschan]

Thanks Man, Great intro to the Arduino attiny

[@pulseworks1663]

whenever i try and upload it says "ctags pattern is missing" and doesn't work. does anyone have any ideas?

[@RahulSingh-my7vx]

i also program the attiny85 but now i got yenkie error check double your connection please help me

[@mohamedfarid7499]

Thanks a lot , i try to use Raspberry pi pico and circuitpython to program this low cost servo motor brain ( tiny85 )

[@trashos817]

hello yesterday i bought an at tiny 85 and before 5 minutes it worked fine but the last time i plugged it in(with a 8*8 matrix) i put reverse voltage by mistake and now they both dont run did i burn them?

[@ssql]

Unfortunately you probably burnt them, I doubt the ATtiny85 has a reverse polarity preventing diode built into it. As for the LEDs they should be fine.

[@rickroller0127]

It says: cc1.exe: error: -fno-fat-lto-objects are supported only with linker plugin. cc1.exe: error: -fno-fat-lto-objects are supported only with linker plugin. exit status 1 Compilation error: exit status 1 When I try to upload code any ideas?

[@AlexDiesTrying]

Wow, this is amazing.

[@msg1956]

Excellent..!

[@jeffbeck6501]

Great job. Super to the point.

[@Rakesh36oi]

Sir I have a doubt when we use atmega328p we need to use Crystal ocillator why we need not use same in attiny 85

[@j_owatson]

The chip most likely has an internal clock. Fun fact the ATmega328p actually has an internal clock however as the clock only has an accuracy of 10% an external clock is used.

[@elalemanpaisa]

you don't need to use one in atmega328 but the internal is 'only' at 8mhz

[@minimalist.6051]

Thanks man! This really helped me out :D

[@peterfabian8496]

Thanks Sir. You help a lot!

[@tarsamsingh1299]

Thanks for this tutorial

[@gg-gn3re]

instead of using 3 resistors, can't you just use 1 resistor on the negative pin to the cathode of the 3 LEDs...

[@flightisallright]

Yes, but if 2 or more LEDs light up at the same time, one LED might see more current than the other(s) but it's unlikely to do any damage.

[@GeorgeGeorge-xj2bc]

These 8 pin avr mcus are great.

[@ConsultingjoeOnline]

AWESOME! Thanks for simplifying this. I may give this a shot now.

[@Ed19601]

Attiny85 is a great chip, but in DIL it is too expensive. A few dimes more gets you a Pro Mini

[@fatroberto3012]

But when you want to make something to sell (not that most people ever do) the SMD ATtiny85 is a fifth of the price and much easier to solder than a 328.

[@tonysicily2687]

If space is a problem and you do not need a lot of functionality the ATTINY is a much better option.

[@Ed19601]

@@fatroberto3012 i agree, but as you already indicate: most of us don't 😉

[@Ed19601]

@@tonysicily2687 sure, there are always circumstances where one is a better option than another. I have used the attiny85 and even the attiny10 many times eventhough space was never a factor, but sure, each has its place

[@tonysicily2687]

@@Ed19601 I love the Nano, such a great device, and really easy to use, but it is just too big to fit inside a magic wand *my latest project) hence e being here trying to learn. Stay safe

[@pig0115]

thanks, very helpful

[@ashkananali8571]

Thank you very much

[@RenatoSantos-vn1vy]

Hola amigo, ¿cómo hacer este miesmo proyecto accionando un servo motor? saludo desde Curitiba Paraná.

[@micarifamily1]

Is your a2 and a3 swapped sorry for the trouble

[@johnvankampen2020]

When I upload arduinoISP, it give a fault. It sais: in pink: #define SERIAL Serial And than in orange: “Serial” was not declared in this scope What do I wrong?

[@nonononatsee8514]

After a short break... does not upload for another 6 YEARS

[@SortofGoodwithTech]

And it’s right after his most successful by far

[@naderhumood1199]

Great apprauch Thank you v much .

[@pilovecn]

这个视频真的很棒

[@SirDella]

No burning the bootloader?

[@mystupidtheories6554]

Thank you

[@sndfx7294]

Good vid!!

[@nootaboot7042]

thanks!

[@electronictechnology1102]

Thanks ❤️

[@apollorobb]

Never hook this up with the UNO powered one slip and you can destroy the ATtiny 85

[@user-du6ex1yj5c]

thanks

[@jeongsindae75]

When is next...?

[@rudisantikakelana1413]

in this video, why you don't processing BurnBoothloader?

[@Adio_]

The Highlow article libraries utilize the Arduino IDE software, I'm not so sure if processing works for this application, but yes, the Arduino IDE is a derivative of processing, so search for some supporting tutorial

[@peteturner8493]

Had the same question, gonna be some unhappy bunnies....

[@ashkananali8571]

Thank

[@mohammedzaman1937]

i am getting this: avrdude: Device signature = 0x000000 avrdude: Yikes! Invalid device signature.

[@georgei2480]

Why 1mhz in settings? That's so slow. Attiny85 has internal clock of 8mhz.

[@shinevisionsv]

Most people use these for battery powered projects. 8mhz uses MUCH much more power.

[@Left0107]

This is very small break 😂😂

[@griffinbrooks6748]

when are you coming back? :(

[@Adio_]

Sorry, I am currently studying at university, haven't got much time to make videos.

[@thanhphongthich73]

thank pro...

[@yukashy]

Very Good! Muito bom! 🇧🇷

[@grafikajja207]

Prečo všetci len Arduino používajú??? Programátor + AVR Studio a viete čo robíte...

[@Adio_]

Aj s tým viem robiť, dokonca aj v assembly, len na to neexistuje rozvinutý ekosystém, v ktorom by začiatočník vedel jednoducho pracovať. V Arduino IDE stačí na blikanie LEDky pár riadkov kódu (knižnice sú už implementované). Naopak v AVR štúdiu na to treba skoro stranu. Je ale pravda, že v AVR studio je človek bližšie k strojovému kódu, a preto sa naučí, ako naozaj daný mikrokontrolér pracuje.

[@lamboqin2180]

Can attiny 13 work, and can arduino1.8.5 work? please

[@skabentertainment1763]

Don't waste time

[@billferner6741]

Sorry, I expected an explanation of the chip and not a project using the chip. Thumb down.

[@yupingliao4078]

Thank you