Hello sir! Huge thanks to you. It's 3am here and I am having exhibition of my Arduino project in 8am morning, I was frustrated as hell. Lost all hopes and went off to bed. Then I saw your video and came to know that 0 and 1 are serial port pins and they didn't allow my program to update. I got up and tried and succeeded. You helped me like a miracle, will never forget this moment. Thank u so much for posting this video! 😇
@asali-channel5 жыл бұрын
Happy to hear my video helped you out buddy! :)
@scythalyst533 Жыл бұрын
exactly the same thing happening to me rn but its 6;50 am
@kashishv2762 Жыл бұрын
you tube algo is making me cry, i got you like after 3-4 days of continuous hunt for my problem , thank you bro !
@bethbacon62443 жыл бұрын
THANK YOU! My PORTS were all connecting blutooth. So I turned it off and re-opened the program to get my USB port to recognize my UNO. It finally uploaded that damn blinking sketch after 2 days. I am very green at this and your video was extremely helpful!
@loganluedtke20633 жыл бұрын
Unplugging from pins 0 and 1 just ended hours of frustration for me. Thank you so much!
@hang88785 жыл бұрын
Sir Thank you a lot! I just wanted to learn something on my own and if I would have failed in just starting the ARDUINO UNO my confidence would be lost before going any further and I would have thought I can't do this !! THANK YOU ALOT!! GOD GIVE YOU LOT OF SUCCESS IN THE FUTURE!! I AM SUBSCRIBED!! (problem was drivers )
@husamsdu4 жыл бұрын
Thank you so much. I use Uno with Labview for Bluetooth communication program. So I used Tx and Rx pins. That was the problem! I unplugged Arduino's 0 &1 pins and it's done!
@vicguitar14 жыл бұрын
I too had the pins plugged in the Arduino as well. As soon as I unplugged my servo from it I was able to upload my sketch. Thanks so much! Vic Canada
@stathistsekouras42253 жыл бұрын
THANK YOU. Solved my (NOT) uploading problem by turning off firewall (win10) for a little while.
@mixgamer29084 жыл бұрын
Thank you a lot! i was making esp32 and it cracked arduino programme settings. now i fixed it! Thank you!
@Jamariyah_Zaire_Malakai3 жыл бұрын
I struggled with esp for along time until I started using python. I would seriously recommend doing all ESP projects with python. It’s fast, clean and so much easier to work with.
@atharvanerkar29133 жыл бұрын
you are great sir u saved my money i thought my arduino had problem but it was port thank you so much sir...
@Sachin-qb6vo3 жыл бұрын
Suberb, i was facing problem from a lot of time. i also watched a lot of videos but you give the solution in this video
@muhammadawais14874 жыл бұрын
i haven't updated the drivers...now my arduino is working properly...thanks bro..good tutorial
@markszizars46823 жыл бұрын
Really thank you!!!!! I am making project useless box and this video saved me hours of working again thanks.
@manusrao40193 жыл бұрын
Thanks for the video after installing the drivers my port option came back!! Thank You
@tankbuster72232 жыл бұрын
Thanks man, you saved me a shit ton of time
@BeMeStick5 жыл бұрын
What you have done for the port??? Please reply
@husam27613 жыл бұрын
hey dude you're the best, i did a stupid mistake by using a charging cable and i did everything from installing the drivers all of them even the ones that my board is not concerned with, but it was the DAMN cable.
@solisvel Жыл бұрын
Thanks a lot. I solved the problem because of this video.
@dengnk71474 жыл бұрын
Thank you I unsuccessfully tried to program the arduino for one year thanks
@indianarduinoprojects87532 жыл бұрын
My led on my arduino uno board is not blinking on pressing the reset button and code is not uploading to it can you please help me 🙏🙏
@namrathasuvarna69815 жыл бұрын
hello sir. In my pc's device manager ,there is neither port option nor other devices option..what should i go for?
@mohinilad29235 жыл бұрын
Hello sir,I saw your video but instead of getting com3 i'm getting com7,and doing the steps u said its still not working..please tell something..thanks
@cinarefendigil72343 жыл бұрын
Thank you so much! This helped me A LOT with my problem
@sritharankrishnan51053 жыл бұрын
Your video been very helpful. Great👍
@skytek88 Жыл бұрын
Thanks and godbless 😍 very helpful tutorial .. done subscribed 😊
@robert72952 жыл бұрын
Thank you this helped me a lot
@myhusanhasanudin48163 жыл бұрын
hello sir, i have a case.... arduino uno: "error connecting to the avr! retrying in 10s (no response from the board: list index out of range, please check the connection, port setting or reset the avr)" how is the solution ..... Thanks
@copterhat20622 жыл бұрын
Hi sir I have tryed all your methods of trying to get it to work put not even the COM its plugged into is showing can you help me
@carlos.galhano Жыл бұрын
Eu tive um problema de comunicação com o meu Arduino, após vários meses de funcionamento sem problemas, resolveu dar um problema de comunicação com a Porta COM CH340. Depois de muito verificar e tudo estava bem, cheguei á conclusão que tinha sido uma atualização do windows que atualizou os drivers CH340. A única maneira de resolver, é ir à respetiva porta e reverter para os drivers anteriores. Espero que ajude.
@rajawikiaa4 жыл бұрын
Disconecting 5V and GND while uploading worked for me. when I tried again to do it while plugged, I've got the same issue as before.
@subhradipacharjee8782 жыл бұрын
Thank you a lot . It really helped me
@pratikrawat15 жыл бұрын
I tried update driver but still it showing programmer is not responding my board is arduino uno plz help
@asali-channel5 жыл бұрын
Sorry for the late response! What brand is your Arduino made of? This is important for installing the correct drivers!
@rohitkumarrai40502 жыл бұрын
I am using mega 2560 with python using pyfirmata Since i made communication with my program i was using it through its port no ttyACM0 ( i can see it by its ide installed in my pc) with board selected as Arduino mega 2560 nd all was working fine But from last two days suddenly and automatically it changes its port no continuosly Means lets say currently the Port no is ttyACM0... Now if i do power on and off then i try to connect it then it shows errror in communication Then if i check it then it showing that its port no is ttyACM1 now Similarly next time ttyACM2 and so on May i know why this is happening? Any idea?
@abhishekdey51875 жыл бұрын
Sir i am doing a voice controlled robot and my arduino is not getting the code uploaded.Should i remove the 0 and 1 pins and try uploading???
@Just-TheDina3 жыл бұрын
I have question when I enter code in arduino and save it before saving the code it closed I mean ide closed
@damofx2 жыл бұрын
Honestly, Thank you so much!
@anekdoche70552 жыл бұрын
OH MY GID THANK YOU SOOOOOOOOOOOOO MUCH
@Akhil-mw7py4 жыл бұрын
this is permenent flashing ? or restart then erace ?
@yasirtahir99334 жыл бұрын
Sir I have facing a problem in degitalwrite declaration please tell me how I can fix it
@bilalriaz24265 жыл бұрын
I'm getting this error while uploading the program.Please Help me. " Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno" This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. "
@VIDEN_SL4 жыл бұрын
I love you bro ! Its working..
@peter._social4 жыл бұрын
Thx thumb up for this video u helped me
@tech46824 жыл бұрын
hey pls help i have this arduino uno, it always error when uploading, i check everything on the software and everything was right. but my arduino LED always blinking even though i reset it. is this one of the problem that might be the cause i can't upload?
@asali-channel4 жыл бұрын
Are you getting any kind of errors when uploading? If so please tell me which one
@tech46824 жыл бұрын
@@asali-channel it says sync error, and programer not responding, do you know what's that mean?
@asali-channel4 жыл бұрын
I might know, can you tell me what type of arduino you have? Duemilanove, Genuino, etc? (I don't mean uno)
@tech46824 жыл бұрын
@@asali-channel i have genuino
@JerryOhh3 жыл бұрын
my arduino leonardo the COM 7 is gone and i can't install or erase a new code
@misbahhasan62723 жыл бұрын
In my case I am getting Sketch used 3796 of program storage space.maximum is 32256 bytes global variables use 190 byte of dynamic memory leaving 1858 byte for local variable.
@ArcanePath3604 жыл бұрын
All I get is avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x27
@UniversalTechnics4 жыл бұрын
Hello Valued Expert, May you help me to get a sketch for reading and changing SDcard CID. Thanks in advance!
@huska13824 жыл бұрын
thanks for the help mate
@crackedbowlz23395 жыл бұрын
i cant thank you enough my good sir youve helped me
@asali-channel5 жыл бұрын
You're welcome buddy!
@technicalchannel64164 жыл бұрын
Hlo sir This is Trilok Singh from India.sir my Arduino uno 3 is uploading show error again and again .and same nano .so please tell me about something
@unlimitedslip9063 жыл бұрын
Try closing Ultimaker Cura if you have it running, that was my problem
@khashamshakeelsatti78973 жыл бұрын
This video help me .Thanks
@sudarsanhot8 ай бұрын
i have driver, i removed RX and TX wires, i have bootloder and still not uploading
@damiadurar6865 жыл бұрын
why i always get AVRdude : stk500_getsync : programmer is not responding. my port and my board is on correct place ..??
@asali-channel5 жыл бұрын
Sorry for the late response! Have you tried to unplug all wires before uploading? Once it has uploaded try to reconnect the wires
@damiadurar6865 жыл бұрын
@@asali-channel i already tired that
@asali-channel5 жыл бұрын
Perhaps yours is broken, I suggest you try again to follow every step I took in my video, from what brand is your Arduino Uno?
@hetal.priyadarshi5 жыл бұрын
most probably his bootloader is destroyed.. that was the case in mine... I got another Arduino and used it as ISP to burn the bootloader into the previous one.. @@@asali-channel
@chebismarck11903 жыл бұрын
thanks a lot super helpful
@monotom9144 жыл бұрын
thenks
@rosechitanda97515 жыл бұрын
Thank you very much it worked
@tushyaneilrudr56194 жыл бұрын
i have two arduinos and two cables one of the arduinos work properly while the other does not the other arduino does not even light up its on led its like its dead can someone help
@asithwijerathna7579 Жыл бұрын
Thats Right ...Thanks
@TechnicalGigs3 жыл бұрын
tnx a lot solve my problem
@aryanmudgal11305 жыл бұрын
You are a genius bro
@asali-channel5 жыл бұрын
You're genius!
@a52e64 жыл бұрын
Hello I'm facing the avrdude:stk500v2_RevieveMessage(): timeout error. This is a common problem online with no definite solution
@ammaraflal2 жыл бұрын
sir in my one i cant upload a file to the arduino can you solve this problem thanks alot
@just_Rosey445_18 күн бұрын
Did you later get the problem solved? Cos I'm having the same issues here
@GikkerBotGaming3 жыл бұрын
Thanks Man
@asali-channel3 жыл бұрын
You're welcome!
@archersgaming12893 жыл бұрын
how to fix if orange led not blinking
@dakshjadia2684 жыл бұрын
Thank you thank you thank youuu
@asali-channel4 жыл бұрын
You're welcome welcome welcomeee
@aichico44044 жыл бұрын
Maraming salamat sir
@connorsegeren4 жыл бұрын
THank you so much man
@GoldBonds-ei4bh Жыл бұрын
If you or anyone in the comments can help me out, my takes a incredibly long time to upload it never finished uploading and I don't know what the issue is
@jamilasalvador244 жыл бұрын
How to reset an arduino?
@asali-channel4 жыл бұрын
There should be a small red button on your Arduino Uno
@working73432 жыл бұрын
thank you
@vishalkumar01405 жыл бұрын
its showing programmer is not responding please help
@asali-channel5 жыл бұрын
No wires are connected to pin 0 & 1?
@vishalkumar01405 жыл бұрын
@@asali-channel i am not understanding pin 0 and 1
@vishalkumar01405 жыл бұрын
@@asali-channel how to do please help i am new to aurdino its urgent
@asali-channel5 жыл бұрын
No wires should be connected to pin 0 & 1 as these are part of the serial interface so please unplug any wires connected to those pins
@vishalkumar01405 жыл бұрын
@@asali-channel i am only trying to upload program on aurdino nothing is connected but still showing error can i try that aurduino on win 10
@shubhamchoudhary94255 жыл бұрын
please help me out i am making tiny sorter google experiment
@meandmybrother68235 жыл бұрын
My arduno is broken L light is not working
@khashamshakeelsatti78973 жыл бұрын
Love u broo
@Habib-Daood-Rathore5 жыл бұрын
hi, I am using arduino nano and could not get rid of the problem . Here is Problem below. Sketch uses 930 bytes (3%) of program storage space. Maximum is 30720 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x28 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x28 Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. Invalid library found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a: no headers files (.h) found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a Invalid library found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a: no headers files (.h) found in C:\Users\Habib Daood Rathore\Documents\Arduino\libraries\sketch_dec11a
@asali-channel5 жыл бұрын
Can you please upload you're code into a pastebin aswell please? Apparently you have an invalid library somewhere so your code could be helpfull also have you imported the correct libraries?
@mikelee19065 жыл бұрын
@@asali-channel The invalid library has nothing to do with the programmer not responding. The problem is driver related. Windows sees it but incorrectly and the IDE only knows what com port.
@asali-channel5 жыл бұрын
@@mikelee1906 thanks for your response, I appreciate the help!
@mikelee19065 жыл бұрын
For Nano try using the ATmega328P(old bootloader) instead of the ATmega328P. Under Tools Menu then Processor: select ATmega328P(old bootloader). This solves the problem 80% of the time. Good luck!!
@phantominception28812 жыл бұрын
@@mikelee1906 well what about uno
@suleimoro31553 жыл бұрын
Good
@prashamjain_ndflagship_em53234 жыл бұрын
ITS SHOWING avrdude: ser_open(): can't open device "\\.\COM11": Access is denied. Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. CAN ANYONE HELP ??????????/!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@prashamjain_ndflagship_em53234 жыл бұрын
@@abrorbobomurodov2361 what???
@anupbalivada37945 жыл бұрын
good research
@jamesmay45472 жыл бұрын
no sound
@hobbyelectronix6344 жыл бұрын
If your arduino still doesn't work, here's a link that I found helpful: www.hobbyelectronix.com/2020/05/arduino-troubleshooting_20.html
@qsdrfghgujfddyffguff4 жыл бұрын
errors messages are typical than codes
@terenfro19752 жыл бұрын
Nope. Did not solve problem. Have about $200 in Arduino product and it's all bricks at this point. All worked last fall. My firm opinion of most of IT right now is it's all trash and what does work is broken by people making updates. It's not worth the time or head ache to even teach the next generation how to use it.
@hackhobbylab5 жыл бұрын
Hey I have also made video on this problem.
@asali-channel5 жыл бұрын
Oh great to hear, I'll check it out! :)
@hackhobbylab5 жыл бұрын
@@asali-channel Oh Thanks it will be pleasure for me.
@chandrikaprabhu91793 жыл бұрын
Doesn't he sound a bit like Mr cheese?
@ianmendoza65555 жыл бұрын
Thankyou so much bro! you saved my ass lmao
@Ollogon5 жыл бұрын
opa, amigo, tenho arduino uno, e da erro quando tento carregar para a placa, como resolvo isso? como você resolveu o seu?
@asali-channel5 жыл бұрын
Happy to hear it worked out for you!
@clobel55 Жыл бұрын
blah blah blah you talk to say nothing
@vandana3424 жыл бұрын
Anyone having exit error 1
@asali-channel4 жыл бұрын
This means there is an error in your code: forum.arduino.cc/index.php?topic=365466.0