ArduinoUno as Data Acquisition System DAS using Matlab Simulink

This video discuss the following topics:
1- establish a link between arduino and MATLAB and use Simulink to program Arduino.
2- Use Arduino as DAS to measure/plot analogue data from Hardware system and save this data in Matlab workspace.
Once you get the input and output data of the hardware system saved as array in workspace, you may find this video: • Idetification of unkno... helpful to perform system identification and design PI controller for this system.
Kindly, Download ArduinoIO library from this link:
www.dropbox.co...
and you may find "read me" file helpful!

[@ronaldbarcia9035]

Thank you so much! It was very useful! And thanks specially for keeping the library! Greetings from Ecuador.

[@mahmoudghorab1284]

very nice and clear explanation Thanks bro .

[@hassan_essakhi]

good tuto تحية كبيرة من المغرب

[@amr.a-m8350]

الله ينور فيديو رائع بس الصوت فى بعض المقاطع رايح

[@aminosaboud7430]

merci MR ahmad salah très intéressant

[@BilalBilal-cu4zr]

(: Thank you so much for the video & for keeping rar file

[@mohamedhamdi9010]

very indicated good job bro

[@refafaabderrahmane3763]

good work thnks a lot

[@PeaceSk8er19]

Thnx for this tuto

[@adelismoussidene2975]

+Ahmad Salah Nabih a have project with matlba arduino a find dificult you can help me plz

[@GiorgioConcu]

I'm using Simulink in external mode with my Arduino Uno in order to read one analog signal. I'm not able to register the history of my data in the Matlab workspace, because the ToWorkspace block logs only the last two values. How can I fix it?

[@amrmoneer2483]

thanks ahmed for your video,but there is a problem with me the file IO which i downloaded is on the type M file not matlab code as you . how to change it?

[@Ahmad-gn1pd]

بشمهندس احمد ممكن حضرتك تعمل كورس في المجال داه

[@kiranpadol8211]

Respected Sir, You had shown very nice video. By taking a motivation from your video I started working on it. During loading the model from Simulink to the Arduino Mega2560 (Made In China).Showing Following Error. I am trying to connect in normal/external mode. But it is showing the following error. Whatever instruction which it had given I did all these but it is not working out. 1. Initially I have selected Automatic PORT Selection 2. Manual Selection 3. Installing Hardware Support Package 1 more time then it is showing option of “REINSTALL” By following your step LED is blinking but when deploy in Hardware it will give following error will u please help me to solve this error. “The call to realtime_make_rtw_hook, during the entry hook generated the following error: Could not automatically set the host COM port for your Mega 2560 board. This may be due to a disconnected or unrecognized board. If the board is not connected to your host computer, connect it and let Windows install the board driver. If the board is connected, update the board driver. Open Windows Device Manager and locate the board either in Other Devices or in COM Ports. Right-click on the board and select 'Update Driver Software...' Next, select 'Browse my computer for driver software'. Specify the search location as C:\MATLAB\SupportPackages\R2014a\arduino-1.0.5\drivers and click 'Next'. If Windows still cannot automatically set the COM port for your board, set it manually. In your model, click 'Tools', click 'Run on Target Hardware', and click 'Options...' In the dialog that opens, change 'Set host COM port' to 'Manually' and the set the 'COM port number' to match the port number in Windows. The build process will terminate as a result. Could not automatically set the host COM port for your Mega 2560 board. This may be due to a disconnected or unrecognized board. If the board is not connected to your host computer, connect it and let Windows install the board driver. If the board is connected, update the board driver. Open Windows Device Manager and locate the board either in Other Devices or in COM Ports. Right-click on the board and select 'Update Driver Software...' Next, select 'Browse my computer for driver software'. Specify the search location as C:\MATLAB\SupportPackages\R2014a\arduino-1.0.5\drivers and click 'Next'. If Windows still cannot automatically set the COM port for your board, set it manually. In your model, click 'Tools', click 'Run on Target Hardware', and click 'Options...' In the dialog that opens, change 'Set host COM port' to 'Manually' and the set the 'COM port number' to match the port number in Windows.”

[@ahmeddz8062]

ممكن تساعدني في مذكرة تخرجي العام هذا

[@miguelsaidhaddadchavelas7272]

your video looks good unfortunately It is not in english :(

[@mahmoudabdulfattah7294]

ممتاز ربنا يبارك فيك ممكن نبقى على اتصال

[@richachauhan3319]

can you explain in English ??

[@Ahmad-gn1pd]

عربي

[@amr.a-m8350]

الله ينور فيديو رائع بس الصوت فى بعض المقاطع رايح