Are You Making a Mistake With Your BRZ/FRS?!

[@FitmentIndustries]

Find out the perfect fitment for your FRS/BRZ! 👇 bit.ly/3MAeHX3

[@thorch69]

I kept my FRS exterior stock to be different.

[@Flunoir]

LMFAOOO THIS IS THE BEST COMMENT EVER 🤣🤣🤣🤣

[@SpiritedDriven86]

Bro same, and i actually drive mine hard, whether spirited, racing, or drifting, just to be different 😭😭😭

[@ll_eclipze_ll1638]

Some shit I would do tbh

[@romeocano1919]

I needed skirts and a duckbill idc

[@aaronsahib6673]

The "BRZ/FRS Scene" is . . . something else. It's got bad apple reps, but pretty solid overall.

[@FitmentIndustries]

I've heard this too, its like any other platform group! -Edgar

[@MyGoToUserName]

Locally I can attest our 86 community is a good bunch. Having a large twin parts distributor locally helps.

[@Immashift]

I was INCREDIBLY happy my '13 escaped the valve spring issue. After checking my mail and finding my recall notice, then checking maaaaany sites against my VIN and finally calling my dealer, I found out mine was just a few off the line after that happened. The cricket noises... kinda. My '13 is fairly quiet at idle, save for the normal Subaru noisy engine stuff. Just what it do. Torque dip can be improved with the Openflash tablet, which I got for adding launch control 2step noises for shits and giggles. Another thing you might have is shitty idle that goes up and down at lights even when it's warmed up and you're not changing engine loads, etc. Found out that is just what it do stock. Dealer can update the ECU firmware, or the Openflash tablet will cut that out for you. Pffffff RPF1s. It ain't a Civic. Still looking out for a set of Enkei Kojins in my area. I'm not gonna widebody it. It's a lil guy, it's gonna stay a lil guy. Bought it because I fell in love with the aero the way it is. Widebody looks great, but isn't my thing. Also fitting into half a parking space is fun. I'm still on the fence about boosting mine. It's more than fun enough, and from the seat, when it hits 3500+ RPM it feels like a different car, kinda wakes up and remembers it's a sportscar. I daily mine for 3 seasons and I need reliability over stututututu noises. Also gas mileage. Went with cheap Teins for suspension and I may swap those for something more adjustable later. The Tein basis Z set has been fine for 5 years now and my only complaint is that hitting a pothole feels like you dropped your shopping cart off a curb you weren't expecting to be there. Learn where they are and avoid them. I turn dodging them into a game lol. If I had to do suspension over again though, like if the Teins suddenly drop out of the car, I'm gonna spend a lot more on a better set. Actually one other small complaint is the rears don't come down far enough with stock wheels. Even with a set of spacers it's slightly off where I want it. Bottoming out the height on the fronts looks perfect though. A set of anything 18" would fix the fitment. Specific wheels are just hard to find in Canada though. My exhaust is an MXP Comp RS. Couldn't be happier with the tone. Does lil baby pops decelerating and I can make it do it on command, just don't expect angry AMG noises from just a catback. Without the cats and with headers it'd be even better but I also like not getting tickets. The Comp RS is a little drony on the highway but not terrible. It's loud, but not obnoxious, and at city speeds it's barely noticable while moving with traffic. If you drive the thing in winter, which I did for two years before getting a 4x4 truck for a second vehicle, you will both have hilarious amounts of fun and irritation. The fun comes from flying up an on ramp at 5k RPM thirty degrees sideways and spinning off every stoplight without nanny mode TCS on, and the irritation comes from the windows: The windows are frameless, and roll down an inch to break the seal as you get out. Only in winter, if the window is frozen shut, and you get in to go to work, the window can't roll down, and the computer resets. Then you get to work, and get out, the window rolls down, but doesn't roll the 1 inch back up. You then have to get back in the car, turn the key to run, roll the window allllll the way down (snow and ice in your lap lol), then alllll the way back up. Then get out and it now remembers that it has to roll back up. Made me a couple min late to work many times sitting in the lot fiddling with my stupid windows Do what I did and pull the relay for what controls the windows before winter. No power windows then, but it's less annoying. Or get a second vehicle for winter like me :D The second irritation comes from the seatbelt chime. DEAR GOD. Put so much as a few sheets of paper on your passenger seat and you get MEEEEEP MEEEEEP for an entire minute as you drive away. There is however a box you can plug in behind the stereo that eliminates both that and the pedal dance to disable TCS completely. People also don't know about the trunk safe lol. If you clean your trunk, and then your fob and the cabin button won't pop it, pop it with the key and look for a button on the far left that disables popping the trunk electronically. Great for expensive audio equipment. Good luck if you lock your keys in your trunk with that on, as the seat releases are also in the trunk. Also don't try to stick a 12" sub in the trunk. She don't fit. Sorry for the essay. :)

[@Flunoir]

I like this, thanks

[@darylclifford]

Yep, I read the lot, didn’t understand the trunk key bit, but it’s late and I’ve had 5 beers, goodnight !!😴

[@zanechristiansen]

@@darylclifford literally

[@MrCleverclips]

I know you already bought a tracbox but you can also use Toyota techstream to disable seatbelt chime. I got a copy on eBay with a obd cable and changed all kinds of settings in the car. Disabled the daytime lights because one had gone out, changed the delay on the cabin light when you stop the car, there’s a ton of stuff in there. Plus you can bleed the brakes and do health checks and get check engine light codes reset from there.

[@Blacklisthgs]

I was a huge fan of Initial D and when I finished the series, I originally loved the introduction of the new-gen 86 when it came out. I am now picking up my 22’ BRZ this Saturday and so stoked. Although I cannot stand the camber on the wheels that people do that end up destroying the car on bumps.

[@55Aarronneedham]

When you buy one you will see way more cringe A/T, wide bodies with a big wing on bags. Love the 86 and BRZ but most people who buy them are a special kind of dumb. If you plan to do a performance build and talk to other BRZ/86 owners they just get glazed over eyes and just say what about rocket bunny. If I didn’t absolutely love the car it would be an embarrassing car to have due to the association with other owners hahaha sorry rant over.

[@definedsinner8669]

don’t over pay because they’re short on clips

[@quacko11]

camber is fine just not excessive anything past 5 degrees is undrivable. personally i run my fronts at -3.2 and my rear at -2.5

[@quacko11]

@Lapsio miata also has alot of body roll as compared to the brz which doesnt have that much chassis flex at all

[@quacko11]

@Lapsio idk mine is very low and the kw coilovers are significantly better than stock i notice a massive improvement in handling. Just exiting corners is a bit more tricky.

[@futurefunksaturn]

Got my 86 in thunder gray color with stage 2 e85 with a tune. Totally agree with the difference in feel once tuned with a header, esp adding e85 to the mix gives that area of where the torque dip is a punch.

[@FitmentIndustries]

Any issues going on with it? Or everything working out fairly well? -Edgar

[@futurefunksaturn]

So i've been running e85 for about a year and a half now and I have had zero issues. There are some things that I noticed like my oil burning quicker than it would on 91 and having to fill up more often but that's normal for running ethanol. I recently started to use some lucas ethanol conditioner just to be extra on the caring part of it but in all it's a fun experience if you're looking to make more power on the engine without using a turbo/supercharger. 👍

[@anonamoose1891]

What are you getting 225hp ishhh?

[@futurefunksaturn]

Well Delicious Tuning has ran a dyno with a completely stock frs/brz that made about 200hp with ethanol. These cars make about 165 to 170 stock on the dyno. It's a decent bump up for a lightweight car and it honestly all comes down to what mods you have and the tune that you're using. My best guess is that i'm making about 40 more horsepower than stock and 30 more pounds of torque.

[@Flunoir]

@@futurefunksaturn do you have a flexfuel kit?

[@jrodo3484]

I went the boosted route and I absolutely love it 8psi e60 320hp and 10psi e60 350hp it’s insane and love it might got built block soon

[@3kingz961]

Looking into getting an brz/frs and I definitely needed this!!

[@FitmentIndustries]

💪🏽💪🏽💪🏽 glad we can help! -Edgar

[@puffypopify]

Get a 370z, they’re better 😂

[@FitmentIndustries]

With these prices 🥲 -Edgar

[@3kingz961]

@@puffypopify out of my price range :/

[@M0MMA.B34R]

I have a 2017 86 and got my wheels, tires and suspension from you guys 😜 love your videos

[@FitmentIndustries]

❤️ appreciate the support, you da MVP! You got it up on the gallery?! -Edgar www.fitmentindustries.com/add-wheel-offset

[@M0MMA.B34R]

Nahhhh I don't think it's ready for the gallery quite yet

[@FitmentIndustries]

Whenever its ready you know where to find us! 🤘🤘🤘 -Edgar

[@richiesworld1]

5:50 These are the Gram Lights 57DR-X. The best looking in my opinion, but only really available in 5x108.8, 5x112, and 6x112, so mostly 4WD's.

[@israelrivas7958]

I just recently got my dream BRZ last week, honestly, the only thing I'm going to be changing is the wheels/tires and the taillights

[@Mxer724]

Headers and OFT. Makes huge difference.

[@spongesurf12]

My ‘13 is still a great car almost 10 years in. I love it every time I go around a corner! Had the valve spring recall done because it was a must for Ca registration but has been fine since. Mild mods: OpenFlash tune, Borla catback, 8.5x17 Forgestar F14 with Pilot Sport AS3+, RCE springs, shift springs. Considering building a flat bottom/splitter/diffuser. Maybe a blower someday?

[@jaydub5515]

I love what you guys are doing at FI, I just have not liked any of the deco-directional wheels... I guess I'm just a symmetrical kinda guy. I run matte bronze Niche 17’s on my 7.5 gen Accord EX-L V6 6MT

[@jaydub5515]

Wrong number of doors though...

[@FitmentIndustries]

Thats okay! 🙂 Hopefully once we start releasing some of our new lineups you'll find something that'll cater ya. What else is done to your Honda?! Do you it up on our gallery? If not you should add! -Edgar www.fitmentindustries.com/add-wheel-offset

[@efactor1984]

The crickets is from ethanol. When I was stationed in Germany using 98RON, it had less ethanol than the US. I never heard the crickets for three straight years until I came back.

[@efraincastro5196]

I just finished working on a 86 , i have a brz and the new fitment ep is about these cars lets gooo xD love u guys:)

[@FitmentIndustries]

❤️ thanks fam! What do you have all done to it?! Or any plans? -Edgar

[@efraincastro5196]

@Fitment Industries thanks for replying:) bc's , esr's cosmetics need to update the pics on the gallery, looking forward to turbo kit:)

[@FitmentIndustries]

Lets goooo! Cant wait to see it fam! -Edgar www.fitmentindustries.com/add-wheel-offset

[@TrVlogs82]

Oooh thank you. I'm saving up for a BRZ too.

[@FitmentIndustries]

Lets go! 💪 you cant go wrong with it. -Edgar

[@TrVlogs82]

@@FitmentIndustries Agreed.

[@SteezyTeej]

got a tomei uel header, remark muffler delete and my brz sounds like a blobeye EJ. E85 tune helps the torque dip, and i just got my first set of wheels from you guys. Had the car for 1 year and i love every moment i get to drive it. always find myself making excuses to drive it. If this car had 2015+ wrx power, it'd be insane. Might supercharge someday

[@duomxll]

One of the things you missed was the Throw Out Bearing in the transmission. Some are good forever but, like mine, it will wear out and start grinding. If not addressed, it could damage your trans snout and seize your transmission causing it not to engage at all. It sounds like a whining/grinding noise when you push in the clutch.

[@FitmentIndustries]

Thanks for the insight and info homie! Should help others too. 👏🏾👏🏾 -Edgar

[@rahundsigma]

My 2015 had this issue at 70k miles. From what I remember, there is an updated throwout bearing with a certain mark on it

[@Aaron-fb6mb]

@@rahundsigma yep mine happened at like uhhh 70k or so. New throw out bearing has a white dot painted on it. Did the change myself

[@darylclifford]

Good thing mine is an automatic, but a gift from my son. Thanks son 🙏👍❤️

[@darrinn7]

The impacted cars with the valve spring issue (model year 2013) are those built & sold in 2012 and early built in 2013. Check the vin, don’t let a good deal on a 2013 FR-S or BRZ slip thinking all 2013 have this problem! Typically if you get a 10 Series built in June it shouldn’t have it. The chirping isn’t just a 2013 thing. They did that for several years until 2017. It’s noticeable if you idle with your hood open or idle at a drive thru as the sound of the metallic chirp bounces of a wall right back at you. They changed the fuel pump for MY2016 and it kept chirping, in MY2017 they changed the fuel pump cam to reduce friction then the chirps went away. The torque dip wasn’t mostly resolved until the second gen, boosting and changing the headers plus a tune will fix this. A E85 tune by itself will help slightly. The 2012-13 FR-S/BRZ still have the cooler front bumper cover (refreshed MY2017 look like the mouth of a catfish).

[@granpaflexinton4521]

Wow I just bought an fr-s

[@americanbassin2648]

And transmissions I know once you turbo one and start making upwards of 300 it gets pretty easy to blow the lower gears

[@devonsmith3543]

To get rid of the infamous chirping I’ve noticed it goes away most of the time if you switch to non-e

[@mikecurry6847]

Just picked a 2022 today and I'm honestly blown away that I found one for sale. It's actually possible guys 😆

[@FitmentIndustries]

Hell yeah! That’s good to hear haha, tricky to find right now! -Edgar

[@mikecurry6847]

@@FitmentIndustries hell yes it was. I asked the dealer how many calls he got on the car after I bought it and he pulled out a freaking stack of post-it notes with people's names in case I backed out. I called and bought the car less than 20 min after it was listed. No joke, I made over a hundred phone calls to over a hundred different dealers all around the country before I found one. Naturally I didn't get to pick my own color or trim (beggers, choosers, and all that) but luckily it was premium trim and the trueno blue is really growing on me. I even lucked out and it was within driving distance. The round trip I made yesterday to pick the car up was over 15 hours of driving and I'd do it again if I needed to. To anybody that's trying to buy one of these, call the dealer and ask if they're going to be "allocated" the car any time soon. Specifically use that word, "allocate." That's what they call it when toyota gives them cars to sell that haven't been custom ordered/pre-purchased. Most of the allocations are being sold well before the dealer actually has the car, often before the car is even finished so they don't even have pictures. They don't really know what they're getting until shortly before it happens. If they don't have one or if they have a long wait list, just keep expanding your search radius and keep calling toyota dealers. If it's an out of state dealer, lead with asking them if they will even sell out of state because some can't do it or just don't want to. You really can get lucky. I found one before this for sale in NY but it was really early in my search and I didn't realize that I needed to buy it immediately. I thought about it for a few hours and by then, it was gone. So just don't give up, you might get lucky.

[@JomesZ]

There good platforms but to be honest with what everyone is doing...they all look the same unfortunately, be different with your build and don't look like any other 86. 😑

[@jefferydishaw176]

That’s almost impossible. Anything you could possibly do has just about been done on these platforms.

[@D3rpyD3su]

If you bought a brz/frs to try and be different, then you bought the wrong car

[@M0MMA.B34R]

86/brz/frs has got to be one of the best platforms there are! I've never seen so many after market options for one vehicle. Maybe the car scene is just saturated with them, but I've never seen two that were identical (unless stock)

[@glory3767]

Disappointed the option labs R716 wasn’t recommended. They look amazing on my frs. Mine frs is red and I went with white r716

[@FitmentIndustries]

Hey its just some more popular ones we are aware of, but thanks for the recommendation! 🙂 will give other homies an idea who read the comments. 🤘🤘 -Edgar

[@demineon4966]

Love mine sitting on bags and rfp1’s, looking at oil cooler and headers next

[@FitmentIndustries]

Wooofff.. 🥵 that sounds hot! Do you have it up in our gallery?! -Edgar www.fitmentindustries.com/add-wheel-offset

[@libertyprime2852]

gotta 22 gr86 and changed out the exhaust to an N1. i dont think id ever do the widebody overly agressive look unless i can also mod the engine to match it. Dont wanna be riced out.

[@danielciezobka9384]

I love this guy! Great vid man!

[@FitmentIndustries]

Gels is amazing. 💪🏽🤘🏾 -Edgar

[@trilliamogdlocog4986]

People that put air suspension etc on these are messing up what the car was intended for but to each their own.

[@FitmentIndustries]

They look good tho. I personally think! Haha, but yes, to each their own. -Edgar

[@JohnSmith-yl8sg]

Why does the Toyota 86 on the thumbnail image have "Nismo" on it?

[@FitmentIndustries]

😅😅😅 -Edgar

[@JohnSmith-yl8sg]

@@FitmentIndustries - Hahahahaha

[@hehe-en3ex]

Got my 2013 at 48k miles for 8k could not be happier

[@ThatGuyFromThatOneApp]

Ahem... buying one.

[@FitmentIndustries]

👏🏾👏🏾👏🏾 -Edgar

[@x_stanleymodz_x3296]

Question for everyone he said about avoid 2013 Frs and I bought one recently. Im worry about the 2 problems he said, should i keep it o sell it

[@srinivasramesh2002]

@Fitment industries i want to know which fitment is used on the nfs prostreet Mazda rx7 of the players on the rear wheel

[@hewbambam]

Drove a gt86 today and loved it. If I was going to buy a new budget sports car this is what I would buy 100% I have a turbo na miata now but screw the nd miata, the gt86 is wayy nicer.

[@hewbambam]

The one I drove had a complete tomei exhaust, bc racing coil overs, and black te37 reps and looked really good

[@FitmentIndustries]

Very nice! So when are you going to pick yours up then? 👀👀👀 -Edgar

[@hewbambam]

@@FitmentIndustries nah lol, cant afford that haha I'm happy with my miata

[@gdlc924]

Does anyone know the wheel that’s on the bottom left corner that’s a 5 spoke directional and silver, it’s on the 1st second of the video, it’s right under a 10 spoke wheel that’s in the middle row of wheels

[@Misput]

vortech makes really good superchargers for the brz/frs !

[@purabus5450]

hey Gels great series about cars where you get straight to the point instead of talking it's history for 8mins [u know who I am referring to]. Make one on the Challenger as well [ Hellcat specifically]🤩🤩

[@FitmentIndustries]

We're just trying to spice it up for ya'll! Glad you enjoy it. 🤘 -Edgar

[@DOMINIQUEHERROD]

THIS IS A GREAT DAMN VIDEO KEEP UP THE AWESOME VIDEO'S !!!!

[@M54B30_fan]

LS swap!!! I saw a small company’s brz ls swap. Dude said it spun in 4th gear at like 90

[@FitmentIndustries]

AYOOOO. 😵‍💫😵‍💫😵‍💫 that sounds NASTY! -Edgar

[@niclash4534]

Or leave it stock and just enjoy it. :-) i do anyways

[@FitmentIndustries]

But.. Wheels, Tires, Suspension 😥😥 -Edgar

[@jetsiel8885]

Got one a year ago definitely love it but definitely wish it was faster really close of pulling the trigger on going k swap and slap a turbo on it

[@FitmentIndustries]

Now this would be something! I personally have never seen a K swapped 86. I wonder how many are out there.. 🧐🧐 -Edgar

[@jetsiel8885]

@@FitmentIndustries I’ve seen about 5 there’s a company making a kit don’t know if it’s out or not yet but I’m waiting on them hopefully don’t break the bank to bad 😂

[@FitmentIndustries]

Curious to see where you go with this! Keep us posted. -Edgar

[@Carlos.Rivera]

I did oem+ Nothing fancy

[@kevinrichter7971]

These almost depreciated to where I could afford one then the market went all crazy

[@FitmentIndustries]

ALMOST 🥲 we played ourselves.. -Edgar

[@thatonefrs9349]

I just saw this video right after finishing my coil overs and was like is this a sign 😂

[@FitmentIndustries]

Ayeeee! How’s it looking?! -Edgar

[@patrickwasiewicz8843]

I'm thinking of getting the Rays Gram Lights 57DR for my FRS, would you recommend 17" or 18"?

[@FitmentIndustries]

Depends what you're going for! I think 17's would look good on the FRS, if anything take a look at our gallery and get a good idea! -Edgar www.fitmentindustries.com/wheel-offset-gallery

[@patrickwasiewicz8843]

@@FitmentIndustries Awesome thank you for replying! 🙏

[@zechariahtlee]

17" for your daily and less speedometer headaches. 18" if you want better handling or so I've heard.

[@mrminerniner6153]

I've been waiting for this video I got an FRS 6 months ago and imma put a new exhaust on it this weekend lol

[@FitmentIndustries]

What exhaust system did you go with?! -Edgar

[@mrminerniner6153]

@@FitmentIndustries Nameless muffled track pipe! It was the cheapest one I could find that I like the sound of. Only $260 bc broke teenager lol

[@FitmentIndustries]

What about wheels? 👀 have you started hunting or do you already have a set? -Edgar

[@mrminerniner6153]

@@FitmentIndustries Still on stock wheels. Imma wait for the Anovia Kano's to release then try to pickup a set

[@FitmentIndustries]

Lets gooo! 🤘 that'll be dope. -Edgar

[@ethanglinsky2211]

Can you guys do a dsm version of this please

[@president_chimp]

GT86...plus... Cosworth supercharger Nameless exhaust Tein Flex A coilovers + EDFC II AP racing brake kit OZ racing ultraleggera... = Happy Wife 😀

[@FitmentIndustries]

😳😳😳😳 -Edgar

[@thatguy4994]

Probably shouldn't have recommended the Falken Azenis FK510 since they're soon releasing the FK520.

[@soren7133]

i have a boosted frs on 9 pounds of boost making around 290, with a bbk, and enkei TY5 with ps4s all around. i do not recommend this car if you’re gonna beat the piss out of it. don’t be me. i’ve replaced 4 motors

[@brutusdior1550]

What are those 5 spoke split top left behind u??

[@FitmentIndustries]

Forgestar F14! -Edgar www.fitmentindustries.com/store/wheels?sort=instock&brand=Forgestar&color=Bronze%2FTan&saleToggle=0&qdToggle=0&suspension=Stock&mod=No%20Modification&rub=No%20rubbing%20or%20scrubbing

[@Treaxvour]

You got one detail wrong. Subaru did not make the whole drive train. Toyota made the transmission. That's why it's not awd.

[@calvinarends380]

Dude I buyed a renault clio 2015 and I am looking all over on you guys website and nothing show me about the spec and I was planing to buy the new astro so sad

[@FitmentIndustries]

Oh man, shoot [e-mail] an email and maybe they can help ya further!

[@calvinarends380]

@@FitmentIndustries thanks I will

[@FitmentIndustries]

No problem! 🤘 -Edgar

[@zakupaku5629]

Taking a frs or 86 for engine work at yota dealer a gamble, whole different setup. If it’s warranty work You just gotta take the L.

[@scottietrent7764]

I have a 2015 still can’t decide on what wheels I want for the car

[@FitmentIndustries]

Take a look at the gallery and maybe you'll get some inspiration dawg. A LOT of options out there for sure! Heres a link.-Edgar www.fitmentindustries.com/wheel-offset-gallery?sort=yno

[@josshuaviera]

A wheel 18x9 30+ will fit good?

[@FitmentIndustries]

It would! Personally i would check out our gallery to get a better idea on it. Heres a link! -Edgar www.fitmentindustries.com/add-wheel-offset

[@itzzkittens3198]

Don’t stance it, track it one time with a proper instructor and then decide how you want to build it

[@MetalHipoKiller]

Do the a90 next please :) love you long long long long long long long time.

[@j0shuaj]

I just came here to ask why a nismo livery is on a 86

[@FitmentIndustries]

Yes. -Edgar

[@definedsinner8669]

i say don’t modify, just do the basic exhaust, wheels, suspension you should b good try to keep a budget and invest your money into something else because i wasted awayyy to much i definitely definitely don’t recommend modifying your car if you live in California because you’ll be stoped for not doing anything isn’t cheap and ITS A PAIN IN THE ASS to get it clear long process

[@FitmentIndustries]

California laws are just rough in general.. -Edgar

[@justynswartz4200]

You should do one of these for genesis coupe and 370z

[@FitmentIndustries]

👀👀👀 -Edgar

[@onthelow415]

I have a 2013 BRZ with under 100k miles. Tastefully modified because California laws are trash!

[@FitmentIndustries]

Very nice! Whats all done to it?! Do you have that baddie up on our gallery? -Edgar www.fitmentindustries.com/add-wheel-offset

[@oh-when6450]

all im saying is that a detachable steering wheel video would be nice.

[@oh-when6450]

Make them do it edgar :(

[@FitmentIndustries]

I'll do my darnest! -Edgar

[@Lat0m6]

So now I'm deciding between 350z for under 15k and not a frs or porsche cayman vs 370z for under 30k, helpppp

[@FitmentIndustries]

The answer is yes. Yes to all of them. Gracias 👌 -Edgar

[@Lat0m6]

@@FitmentIndustries but I won't be able to buy anovia wheels if I buy all of them 🥺

[@spartanfill]

13B swap it

[@lbmautos]

Im getting another one period! Ima go with the Hankook Ventus v2s, see how they work on Missouri on/off ramps. 😁

[@FitmentIndustries]

This. What wheels do you have on it right meow? -Edgar

[@lbmautos]

@@FitmentIndustries none, as I dont have the car yet. lol but I plan on doing a CR Kiwami style in white 18in (not sure which tire yet) and some rpf1s 18s silver with the V2s. I had a asphalt frs a couple of years ago, loved it but needed something bigger, hence the thumbnail.

[@lbmautos]

@@FitmentIndustries meow lol

[@laithecopeland310]

@@FitmentIndustries grimm light 57 btw 2014 Scion FR-S

[@laithecopeland310]

Missouri I bought the car I got electrical issues though I’m trying to find a place that could help.

[@maxxedredlineproductions]

That thumbnail oh….. 😂

[@FitmentIndustries]

😅😅😅

[@rubimag_3045]

Was goood

[@FitmentIndustries]

Yes you are. ❤️ -Edgar

[@jakubkujawa695]

My 86 with 6000km on odometer was towed to dealership today 👍. #SUBARURELIABILITY

[@FitmentIndustries]

What happened with it?! -Edgar

[@dapperAaron]

My 2014 FRS is pushing 90k on the odometer. No issues, I've kept it stock height and taken that baby on multiple trips, camping, deserts, snowy mountains, also got into small accidents but Toyota built this sucker tough, also surprisingly roomy as I've fit 5 people and so pack it to the max going to the beach and even fit a 50" new tv in the trunk. It's not perfect and I've thought about getting something else from time to time but overall pretty happy with it.

[@jakubkujawa695]

@@FitmentIndustries I got a check engine light and code P0353, 3’rd coil issue. Swapped 3’rd coil with first to check if this was a spark plug issue or just coil. Drove it for 40 km nothing happened. Today when I had to get somewhere check engine light appeared again and started to “flash” checked the codes, again 3’rd cylinder coil and misfire. Before tow truck arrived my 86 stared to flash its gauges and climate control panel then the battery died. They had to jump start it at the dealership, when they connected it by OBD it didn’t show any misfires at the time, besides the previous codes.

[@jessekiks]

@@jakubkujawa695 GR or GT?

[@jakubkujawa695]

@@jessekiks GT

[@jdowg6]

i believe no one should be worrying about driving right now

[@FitmentIndustries]

❌❌❌ -Edgar

[@chilledkiwi4012]

Naw not the 3dtuning gt86😂

[@Mekanik.b]

Just came to say hi to Edgar

[@FitmentIndustries]

Ayo! Welcome to the thunderdome homie! ⚡️⚡️⚡️ -Edgar

[@carlosrivera4250]

Edgar 💯

[@FitmentIndustries]

Que paso compa! Im here! 🙂 -Edgar

[@carlosrivera4250]

@@FitmentIndustries Saludos compa keep doing yo thang 💪🏼

[@FitmentIndustries]

Gracias, gracias! 🙏🙏 -Edgar

[@D-AVGGamer]

Don't buy the Rays, they're bunk as shit. They're called Gramslight but they're heavy as balls, they're like 29 lbs a wheel at 18x9.5. your stock wheels are approx 22-23lbs.

[@franchisefred4066]

Yes its a mistake to modd your new car. Everyone with modded cars have been recently targeted by cops in California on a daily basis lol

[@FitmentIndustries]

California just killing the vibe everytime man.. 🥲 -Edgar

[@burakoshimazaki]

I'm about 5 years too late for this video.

[@onthelow415]

Please don't go BC coils on these! Silvers are much better IMO

[@FitmentIndustries]

Have you tested them both out in assuming? What issues have ya ran with BCs? -Edgar

[@SteezyKenny]

Just picked up a set of silvers for my 22’ BRZ, stoked to throw them on this Friday!

[@onthelow415]

@@FitmentIndustries Tested out both, have friends who are still running BC's as well. For me, I went with BC Coils extreme lows for my first option. They were within my budget, had seen them on other tuners and gave them a shot. Daily driven and some autox for context. The top nut kept getting loose, have seen this issue a lot with the 1st gen BRZs on the forums. I also was one of the ones who had some clunky knocking sounds. The ride was meh, but I knew that for my budget at the time I wouldn't be getting exactly what I wanted. Fast forward to the pandemic and Silver's were available. Went with the neomax's 2 ways and I could not be happier!! They ride amazing, much difference. Adjustable damps are solid from the front to the back. For the price range, I can understand why folks would roll with BC's. But if you've got a bigger budget I'd no brainer go with Silvers. It's great to have them here in NA after they were not sold here for so long. I'm planning to continue on with Silver's even for my next car (COME ON GR COROLLA!)!!!

[@FitmentIndustries]

@SUH Glad to hear this fam! Any wheels on it yet? -Edgar

[@FitmentIndustries]

Thanks for the insight homie! and i agree! Im tempted to pick up a GR Corolla when they're out 👀 -Edgar

[@snakes5506]

LoL the only good mod, for the FRS or BRZ is engine swapping 🤣

[@FitmentIndustries]

💀💀💀 -Edgar

[@squirrelm3195]

With how most BRZ owners ive seen modify theirs, yeah, they are making a mistake lol

[@fcojavi2705]

The first mistake is buying one! OOOOOHHHHH! B'dum-tiss...

[@FitmentIndustries]

💀💀💀 I wouldnt say that! Its a good starter platform i would say. -Edgar

[@fcojavi2705]

@@FitmentIndustries Fair enough.

[@Void-wm5hh]

Bro from the thumbnail...what the fuck is this Toyota Nismo BS lmaoooo oof

[@FitmentIndustries]

😂😂😂 listen.. Sometimes we like to throw curve balls like taco 12 packs. -Edgar

[@BIGGYBENJI69]

Best engine mod is an LS swap….

[@FitmentIndustries]

Second person to say this! Haha -Edgar

[@hewbambam]

Day 360 so you want a suzuki vitara

[@FitmentIndustries]

🤪🤪🤪 -Edgar

[@Nathan15038]

Well the thing is I like the car like it looks cool and performance is good but I’m not really a fan of the engine not gonna lie I don’t like to work on boxers

[@ultraguy8771]

Day 367 of asking for "So you want a VW Passat W8".

[@FitmentIndustries]

🐨🐨🐨 -Edgar

[@michelfurman7966]

Day 322 of asking for a "So you want a nissan juke"

[@FitmentIndustries]

🏝 I thought it was 322 yesterday… -Edgar

[@michelfurman7966]

🩴 Nah today's 322

[@anthonymcnatt3799]

Engine swap.

[@finnilrebna348]

Why’s that shit say Nismo on it

[@FitmentIndustries]

😂😂😂 just for fun. -Edgar

[@natsunakusunagi9214]

hi

[@FitmentIndustries]

🔔🔔🔔 hello! -Edgar

[@rmrobertoss]

562st

[@FitmentIndustries]

🏎-Edgar

[@elijahcrosby786]

Day 20 of asking for a “So you want…” or a “What fits…” for the S197/New Edge Mustangs

[@FitmentIndustries]

🏎🏎🏎 -Edgar

[@Mr.Harris.]

*Yes; you’re making a mistake, obviously.*

[@nickmacias5776]

notif gang

[@FitmentIndustries]

🧀-Edgar

[@marklopez3459]

No dont...save yourself money and buy a real car...s2k. Who still competes after all these years. Embarrassing

[@elrudiiisimo3066]

I went the automatic route because I wanted to be different 🥸 Jkjkjk but I did get it automatic for several reason: I don’t know how to drive stick yet, I needed a daily ASAP since my daily got totaled from a hit and run, and finally I found it for 6500 and there was no way I was passing it up. and now one whole year later, I’m still enjoying the life out of it even as slow as it is 🦦

[@vrt_amorsoyt8284]

Did I just see Nismo on a Toyota?🥲

[@FitmentIndustries]

😅😅😅 -Edgar

[@ayyanali2]

not Me buying 2013 frs with no recall on it 🥲

[@Shinwrx86]

Oil cooler should be the number thing you should get for this car if you getting headers go JDL UEL nothing else!

[@FitmentIndustries]

Good advice! Gracias. 👌👌👌 -Edgar