Рет қаралды 1,474
#photography #mcfarlane #actionfigures
This video focus in on the lighting for Custom Armored Darkseid. Paint apps will be in a later video.
Step 1
Drill into the neck straight into the torso cavity 1/8 bit
Carve a notch at the back of the neck for the wires to set against
Step 2
drill the eyes with vise drill
Step 3
fill perforation with UV resin to create a lens
Step 4
place nano LED in perforation and glue in using UV resin
Step 5
Cut the vest at the side and pull over the shoulders, cut a notch for the multi effect board in the mid back, counter sink it, make it flush / square . Drill a hole for the lead at the top left.
Glue with Fabri-tac ---let dry 24 hours
Step 6
attach the lead inside to the micro board and lights
Step 7
fold the vest over the multiword and Cut the openings for the controls
Glue the vest at the side only.
Step 8
attach the USB wire and reassemble your figure
list of materials
2 red nano LED
1 micro board
1 lead
1 multi effect board
1 usb wire
Fabri - tac glue
UV resin
Lights for LEGO
Briksmax / Amazon.com
leads and multi effects board
Lightmybricks.com
Micro board and lights
UV Resin - Hard Type Glue Transparent Ultraviolet Curing Resin for DIY Jewelry Craft Decoration Making - Crystal Clear Solar Cure Sunlight Activated Resin for Resin Mold, Casting and Coating - 60g www.amazon.com...
Sharing techniques to customize current action figures by painting or sculpting what is needed. Producing a figure the is either improved or just creating one from parts of other figures.
INSTAGRAM
photobella_photography
FACEBOOK
/ photobella.visual
Not sponsord by any company, all items are purchused by me and and items are created by me. Any links shared are only to share information to other creators.