ARRMA EASY FIX STEERING AND STEERING SETUP ON ARRMA NOTORIOUS!!!

[@AbigailNavarro123]

Nice share n info my friend, My son love doing things like this anything with a motor n wheels hes in for it lol thank you for sharing my friend😊👍👍👍❤❤❤❤❤

[@2424petem]

Excellent video, saw one on the flipping the truck over idea and that was brutal. Glad I found this video. Excellent post. Fixed my rig right up.

[@Kevinate-]

Your servo Is in backwards?...

[@bobbyhaltiwanger5102]

Been looking for some help . Thanks Bobby

[@eddie2dope1]

Great information 👍👌

[@BCUltimateRC]

It's easier than some of the vids I watched for sure. Thank you for commenting!

[@RittenhouseLifestyle7]

This video is great and I’m going to try this in the morning. I have a vendetta and stick servo stock esc. S6200a receiver. I upgraded the steering hardware to all alloy, for looks mostly. Since then, It seems like the servo was out of whack. It would turn all the way left normally, but then try and go right and it’ll either barely move, or if it does move, it does it slow and only does not even a half turn. I kept trying to figure it out, even removed the servo and repositioned the servo saver hoping to get more leverage. Now, the servo doesent even move. At all. It doesent even respond. The receiver flashes showing my signal is reaching the receiver, but the servo seems dead. I then moved the arm with my hand and I don’t hear any gears crunching or clicks. It sounds healthy like it should. It just don’t friggin work all of a sudden. I know one part of this issue is I must’ve messed up something when I converted the steering and second, I watched a soektrum / horizon hobby tutorial on how to disable AVC. Click receiver 3 times then long press the 4th time. Then turn on remote while holding bind and it blinks three times. Supposedly disabling aVC. No matter what your dx3 is set at. Since I did that. I have had a slew of issues. I’m going crazy trying to figure it out. 😢. It also had issues just connecting. It also won’t calibrate like normal. It use to be you hold stand power. Then it blinks and beeps and then you press set key at neutral. Then full throttle. 2 beeps. Hold and press set key. Then 3 beeps. Reverse. Hold position. Then press set key. Now, I don’t even have to press the set key. I just do the motions and it goes thru like it worked. Again. Steering got messed up somehow and if you know anything about the Bluetooth dashboard? It use to literally tell my speed MPH. Dead on. Now? I’m going over 70-80 mph. It’ll show 33-35moh?! The hell!

[@curtdazzle9416]

Man, this was great! Thx for the upload. 👍

[@PilotRyanMedia]

Super helpful! Thanks!

[@elitesennabubble]

thanks so much mate. thought my servo was scuffed

[@BCUltimateRC]

No problem my friend

[@tinyjojo]

Well I'm very late finding this video but it was a great help. What shocks do you have and will they work on a Senton? Thank you.

[@lridebashitrc9422]

Great idea to tighten the servo. I was curious why you have the servo in the truck like that does it help it steer. I’ve always kept mine stock with the gear drive towards the middle of the truck.

[@BCUltimateRC]

Honestly that was a mistake... lol. I corrected it after another viewer caught it. I have since put a different servo in it but I haven't been able to try it out yet. Thanks for watching!

[@melvinveney]

I have to try this. I been out of the hobby for about 2 yrs bc my kraton is not turning right anymore. I have to slow it down to try and make those sharp turns. And impossible to do doughnuts. I hope this helps bc I'm wanting to get back into the hobby.

[@jessejames2546]

Hope this fixes mine, my steering servo was binding, like it was rubbing, then it loosened up a little with the wheels off the ground, still won’t steer on the ground. Thanks, I’ll try it.

[@BCUltimateRC]

No problem. Take the front wheels off and check those ball joints. I had to loosen mine. Thanks for watching!

[@jessejames2546]

B&C Ultimate RC nope, turned it counterclockwise a little, didn’t help, can’t get it to turn the other way. The screw on the bottom of the chassis (servo saver side) won’t unthread, just turns and turns and turns. Arrmas are are pain in the ass to work on. 🤬 junk

[@BCUltimateRC]

@@jessejames2546 wow that sucks. I hope you get it straight. It's a great vehicle once it's adjusted but I understand your frustration.

[@jessejames2546]

B&C Ultimate RC got it brother, mine was so loose that it was binding on the chassis plate, totally limited all steering, took off the servo in the mount, went up like 5mm, all good. 👌🏻

[@BCUltimateRC]

@@jessejames2546 damn right brother!!! I'm glad you got it.

[@faithwheeler4724]

I HAVE A HUGE TIP: for me it’s the opposite I have to apply the break to start the starting calibration I thought it was never going to work till I did it backwards on accident and it worked also I messed with the servo saver and it didn’t help. at first stearing is fast but it gets slower and slower every turn and almost no stearing sitting still on the ground

[@jrocrcpower5949]

Thanks for the info👌🏼

[@kimdra9321]

WoooooW very nice

[@BCUltimateRC]

Thank you!

[@paulrakis]

great video. what about the tires? or tow you didnt adjust anything with the tires? my Nototious has the tires now stright in the fron tone tore is off to the left. how to i adjust that? the steering arm should be tighitng up?

[@paulrakis]

Its like the alignment is off or that is normal for tires not to be perfect straight. Thanks

[@dsrc8335]

Nice brother

[@BCUltimateRC]

Thanks man

[@jakesrc3583]

Whenever I adjusted my endpoints the servo was starting to get bad but it has little bit of steering.

[@bigwillrc8509]

Good tips bro,thx for sharing👍

[@BCUltimateRC]

Thank you. Thanks for watching!!

[@SacredGter]

Can I do the eps on the senton v3 with a dumborc x6 receiver?

[@philthyco1]

Cool intro bro!

[@BCUltimateRC]

Thank you sir!!

[@roderichriegel3403]

Helpful thanks

[@operation11charlieinc]

Good info brother,,, Hooah

[@BCUltimateRC]

Thank you my friend!!

[@operation11charlieinc]

@@BCUltimateRC 👍🤙

[@SDcas619]

My arrma notorious v5 6s dosent have that hole in the bottom.

[@jaguarsrcfamily101]

FYI Your servo is installed wrong it’s backwards !!!! Should be flipped around rotated the other way !! That might be your issue

[@BCUltimateRC]

Yeah... I saw that. I changed it after the video but it didn't help. A new servo did though. Thanks for watching!

[@fernandosanfranciscoca9278]

@@BCUltimateRC Hello B&C Can I ask you about my son's arrma, its been running fine we have it for 2 years But yesterday it stop making turns It will only go forward and back But the controller doesn't make it to turn left n right. Any idea? Thank you. Fernando

[@NeighberhoodRC]

That’s not on the v5 6s blx I have one and servo keep moving with the mount even with an aluminum mount and I don’t have no steering while car on ground but when I lift it up off the ground it would steer and servo would still move with the mount

[@FLSharkdiver]

Did not have that problem on my Notorious that I picked up yesterday.

[@BCUltimateRC]

Most have that problem... Your lucky I guess.

[@AdrenalineAshRC]

Great video bro 👌🏻 thanks for the tips

[@BCUltimateRC]

Thank you.

[@crazycocaino]

Hi all After that my servo stop to respond to steering Some one know what the problem?

[@godsun358]

Kool going

[@BCUltimateRC]

we have turning.....sounded a little weird!

[@jakesrc3583]

My esc is flashing red will it fix this?

[@BCUltimateRC]

I wish I could help you but I don't know what RC you have, what ESC and motor, batteries, etc. I'm sorry. Maybe try what I did but I can't be sure bud.

[@jakesrc3583]

@@BCUltimateRC well i have the arrma outcast i tried your way but I turned to the left for the endpoints. I think servo is going bad because its making noise?

[@jakesrc3583]

Also it cant adjusted to the left for steering

[@BCUltimateRC]

If it's making noise either the endpoints aren't set correctly, the steering too tight or yes the servo could be bad. Also take your front wheels off and make sure the steering knuckles aren't too tight. You may have to loosen them some. Make sure you can wiggle them a little

[@jakesrc3583]

@@BCUltimateRC steering knuckles are fine just making noise when I turn it on the esc

[@tylerdippel6903]

my steering went out the same way, and now its blown out the new one..

[@notbread5867]

I don't think the servo it backwards because it's like the kraton ;-; and the servo the same

[@tongsmiith88]

Servo backwards

[@ashleymiller5413]

Stock servo is terrible. Easiest way to tighten the servo saver it to add a zip tie under the washer

[@austinrunge1544]

My rc car doesn't have a gear like that or whole on there

[@notbread5867]

Nvm it's back waders ol

[@bigbruce70]

Super confusing I will just take back to where I bought it from!