Arrma Kraton 8s center differential removal fluid change

www.extremercprecision.com/pr...
Hex drivers set

[@The8429]

Who else wishes Earl was their neighbor

[@earlmoorhead5555]

One Harley lol 😂💯👍🔥🔥🔥

[@jeffreyhay2610]

Hey good morning earl,,, You don't know how much you have help me out in your videos you do a lot of trouble shooting that I don't even think about enjoy your day be safe,, your dragster videos are awesome,,,,,,,,,

[@earlmoorhead5555]

Jeffrey Hay appreciate the support 💯💯👍👍🔥🔥🔥

[@TH-qf1en]

Dude love your detailed how to videos, watching a few of them made me jump back into the hobby and get a Kraton 8s. Thank you again for giving such detailed videos

[@never-stock-rc2968]

So Earl. I'm paused at 14:36 and I literally just did some shake down passes on my k8s exb xlx2 combo 1100kv on 39/34 gearing m2c beefcake kit proline belted mashers all that ext ext and I'll tell you what first session my front wheels and tires just lit up instantly lol 😳 so I knew you made a video on this a year ago or more and I told myself let's do it just because you made it look easy. I really wish they filled these with 20mill and earplugs from factor espresso an exb model none the less... Well back to video let's do this!!

[@earlmoorhead5555]

🙏👍👍

[@KurtsRCs]

Nice use of the kitchen stove, I think you have been watching to much RC Guy Garage 🤣🤣🤣Nice how to Earl 👍👊👊🔥🔥🔥🔥💯💪

[@crispyzrcz1676]

Love the how to videos bro!definitely learned alot from them keep it goin!👍👍👍

[@earlmoorhead5555]

Crispyz rcz appreciate that 💯💯👍👍🔥🔥🔥

[@soflorclife6970]

Good bench work brother!! 👊🏼😎👍🏼

[@earlmoorhead5555]

SoFlo RcLife thank you 🙏

[@j.p.77]

Thanks for dropping some detailed knowledge 👍🏼

[@earlmoorhead5555]

J P. RC appreciate you watching 👍👍💯💯🔥🔥🔥

[@GREENFROGRC]

🐸 Enjoyed the video Earl nice job with the differential. Good use of tools at hand with the gas burner. Later

[@earlmoorhead5555]

GREEN FROG R.C. Thanks appreciate that 💯💯👍👍🔥🔥

[@teamvegarc]

Man that looks like a headache 🤕 lol .. I know imma have to see this video again in the near future when I start getting more in-depth with the hobby.. thanks for the info bro 🏎💨💯🤝

[@earlmoorhead5555]

Team Vega Rc thanks hope it helps later on 🙏👍🔥🔥🔥

[@streetdreamz8056]

20mil diff fluid wow didn't know that made that weight. Bet that stuff is thick as H#$L!! Nice work man! Learnt something new 👍🏾✔

[@earlmoorhead5555]

Street Dreamz appreciate you watching 💯💯🔥🔥🔥

[@powervolt748]

Hey Earl great video as always. Another way to remove the tight screws is to heat up the heads with a soldering iron. It will be good to see the difference in handling after this 😊

[@earlmoorhead5555]

I tried that first couldn’t get enough heat into it normally that would work to but these where super tight 👍👍💯💯🔥🔥🔥🔥

[@CoachD386]

Happens on all the ARRMA vehicles i have with sand getting into that area... QC needs to ramp up!

[@earlmoorhead5555]

Life of CoachD yep 👍💯💯👍👍🔥🔥🔥

[@islandrc-duke1972]

Great video and removal

[@earlmoorhead5555]

Island RC -Duke thanks 🙏

[@scottrobillard6905]

I got mine apart really fast with an impact instead of doing any of that and never snapped any nuts screws or nothing I didn't have to heat it up but good luck getting the grease to run out that super thick

[@CmwSpeedrunUk]

Threat video well explained and some great tips❤️

[@earlmoorhead5555]

Thanks 🙏

[@chrismiller1689]

👀Thanks

[@justinfolster2278]

Looks like alot of work on the bigger cars compared to smaller ones i watched a video somewere were u can use a sauntering iron and touch the screws to relese the lock tight might be better then the stove.....

[@jamesgeorge609]

Ah. Yes armma and their loctite,,,,,they need to talk to the factory about that,,,,,,,I’m considering purchasing the 8s. But I think I’m going to add the m2c chassis,,,,,,,,I noticed the screws are larger,,,,what do I have to add to my tool supply to perform maintenance I see the sizes are larger,,,, thanks.....

[@earlmoorhead5555]

James George 4 mm I’m using the tool that came with the Kraton 8s for now it works well 💯💯👍👍🔥🔥

[@neuzeum9496]

Hey Hey Earl! Love your videos. Have learned a lot from you. Would you mind saying where you bought your hex set tools? I would like to get a set that will not strip. Thank you!

[@earlmoorhead5555]

Neu Zeum www.extremercprecision.com/products/rjx-5-in1-hex-screwdrivers-for-rc-car-helicopter-fpv/?cookies_accepted=Y

[@earlmoorhead5555]

Neu Zeum it’s also in the description 💯💯👍👍🔥🔥🔥

[@redblue40rc33]

Soldering iron works good on loctite screws

[@michaelthibault557]

Good morning Earl nice Kraton and did you look at the link i sent you last night for the full force rc they make shock covers for the Kraton also let me know if u did ps them covers would look sick

[@earlmoorhead5555]

Michael Thibault I haven’t seen it yet was working on the Kraton all night I’ll check today 💯💯🔥🔥🔥🔥

[@jeffreyhay2610]

Hey how do you like that new tool set you just got.. So far are there holding up for you

[@earlmoorhead5555]

Jeffrey Hay so far there good they haven’t stripped any of the tight bolts 💯💯👍👍🔥🔥🔥

[@joelfrend4994]

I'm about to tackle this job on my used 8s. I've seen guys using silicone ear plugs for the center diff. Have you tried that before? Thanks and Happy New Year

[@earlmoorhead5555]

Yes it almost completely locks the diffs

[@joelfrend4994]

@@earlmoorhead5555 would you not recommend?

[@andrewwhiting5526]

You're a mechanic by trade? If so how often do you leave tools in customer cars pmsl 😂 😂 🤣🤣 great video 😎😃

[@earlmoorhead5555]

I loose a lot of flashlights not really tools anymore but the magnetic light I leave under cars all the time the battery dies and idk there there but sometime they come back and the light still there lmao 👍👍🔥🔥🔥🔥

[@andrewwhiting5526]

@@earlmoorhead5555 not looking good for you in your senior years pmsl 😂 🤣

[@earlmoorhead5555]

Andrew Whiting I’m there now lmao 😂

[@andrewwhiting5526]

@@earlmoorhead5555 🤣😂🤣