Great stuff Tony 🤗!!!! Lots of good info and props for the road jump 😱. It's safe to say they geared it conservatively bone stock. Still fun, but she moves much better with a 21-23T no doubt 👀. Keep up the great work my friend 👊!!!! 👍👍😎💪👊👊
@hagie614 жыл бұрын
40mph 55mph is plenty of speed for me. Thanks for the great video. Can't wait to get one. Thanks again
@onemansvideos21344 жыл бұрын
I feel your videos are real world bash videos like how I'd bash with it I'm not one to send an rc 50-60 feet in the air
@paulclancy24044 жыл бұрын
Takes more parts practice timing and space ppl realize i dont blame you if you love your rc
@cdarknessfalls264 жыл бұрын
I'm same way don't bash really hardcore
@mrpoole4044 жыл бұрын
I like to bash it but I’m not rich so I don’t go overkill
@BuyitBreakitFixit4 жыл бұрын
Beast of a rc! That is a respectable speed for not having an optional spur (xmaxx) or pinion. Takes a good beating too. Sweet video.
@ShenRC4 жыл бұрын
40MPH is not that bad.. Tony Maybe try setting the timing to 15 degres advanced that should give you a hair top more top end speed... don't want to lose the new GPS go across it with a strip of hockey tape also to hold it down. Nice test bud.
@DJSOULFORCE4 жыл бұрын
Did you happened to test it with a set of higher "C" rated batteries? Seems you're using a 50C batteries while the factory recommends 80 - 100C batteries! Would be nice to see you try that test before you change out the pinion. Thanks bro!!!
@ReadySetRC4 жыл бұрын
A little discouraging but 40 mph is plenty for this size vehicle. Totally agree Tony. Did you look for the other GPS? If you found it, it would be a win for the RC Gods😊
@AB-80X4 жыл бұрын
It will run 55 mph. It just needs a 25 tooth pinion.
@JULIANysuHOHNER3 жыл бұрын
Im between this or the exb version put i dont want to spend more than 1k🤔you think this one is worth? 8s
@dirtrider882 жыл бұрын
4:36 the box says up to 55 with optional pinion (available separately). idk why 40 is such a surprise.
@EXTREMERC4164 жыл бұрын
To get to 55mph you need the optional pinion the 23t so far people did not overheat the electronics with that pinion
@AB-80X4 жыл бұрын
23 won't do it. You need 25 for 55.
@Custnam4 жыл бұрын
Sorry for the off topic question but I just wanted to know where you got that controller camera mount? The U shaped part that attaches the controller base? Im in the process of making my own mount and have the other half figured out but need something like that that clamps on. Thanks
@BlueDually4x44 жыл бұрын
It is a pretty sweet truck. I like how planted it looks, you can just mash it and it goes instead of just back flipping on hard take off.
@tomtizumsrc9634 жыл бұрын
Good video👍🏻👍🏻 I am going to have to get a gps to check top speed on my Kraton 8s. But by video I would swear mine seems a little faster. Only difference is I am running 2 5000mah batteries with 100c for the punch. Never the less great video👍🏻👍🏻
@fsrc28624 жыл бұрын
What's up brother thanks for the content loving it 😎👍
@Ilestun2 жыл бұрын
I don't really see the point of the truck. For what type or usages would you prefer it to the erevo2 ? Yeah it's bigger and the look is absolutely stunning......I agree with that. And appart from max speed (40mph is plenty after all and I'm fine with it), the acceleration os what bothers me. But this beast can be tunned to oblivion, I guess this is the project of those buying this stunning looking RC
@cchhiillaannggoo4 жыл бұрын
Hey hope you read my comment, I bought my Kraton 8S yesterday and I drove it today and I noticed that when I go full throttle it kinda sounds like my motor is rubbing on something, doesn’t sound smooth like when it’s barely moving, is it normal?
@mulvaneyshawn4 жыл бұрын
The speed out of the box is supposed to be 40mph, and the larger pinion has to be purchased to get over 50. Its not bad for how big it is. People want to make comparisons to things like the erevo or other 1/8 scale trucks. Those trucks are 10-12 lbs and this thing is almost 24lbs. The xmaxx is the only real competition from a ready to run.
@CCxRC4 жыл бұрын
Yeah. I get it. I don’t really agree with putting 55mph on the box if it doesn’t come with the pinion to do it. If Timing can get it there then I’m ok with that. The Infraction speed was reachable with the “included” pinion. But what’s to stop companies from saying 70 or 100+mph? People make old Rustlers hit 100mph. Just put huge pinion and new electronics. I mean. Really high numbers are possible with aftermarket. I think boxes should state what is capable with things included. Up to this point I feel like Arrma has done that. Granite hits posted speeds, Infraction, etc. So I was a little shocked it wasn’t close. I plan to work with it and try more things to see what I can get.
@RcNickster7094 жыл бұрын
Awesome looking rig though brother.. HUGE!!! lol Great video Tony.. btw I really enjoyed the Show with Tank Rc the other night, made some great points on the Coppa.. Found it to be very interesting man.. ;)
@jasonbudd2950Jag4 жыл бұрын
Boom 💪 👊 Bigger Pinion & motor timing up to 15 degrees & it will fly!
@CCxRC4 жыл бұрын
Yup! I didn't take the timing that high. I think I went up to 11.5 . I also got 21T &23T pinions for it. to try out. So far...I'm still on stock pinion.
@rgr44754 жыл бұрын
@@CCxRC Do you have a link to the opinions you are using?
@youtubsuck2 жыл бұрын
I thought timing was a joke, really?
@ChrisandEileen4 жыл бұрын
I like arrma.. but ill keep my Losi 3XL... Plenty happy with that and way faster out of the box.
@THEMASKEDMASTER4 жыл бұрын
✌🏻😎🏴awesome truggy. & I’m starting to think I want one 😂. Also is there a way to get programming options or put the punch level up in Traxxas vehicles?
@imserious21873 жыл бұрын
What's some good tires for that rig, better than stock but close to stock in size?
@Grump69neal3 жыл бұрын
How long was the run time with those 2 batteries in ?? 30 mins or 1 hour
@dirtrider882 жыл бұрын
3:40 put some THICK diff fluid in the center, it might wheelie then. also, the road is wet, no grip
@christopherwilliams16524 жыл бұрын
I wish it would wheelie have some kind of wow factor to it
@MoBay876rc4 жыл бұрын
Agree I think the 6s is better it has everything you want in a basher
@deontay79ify4 жыл бұрын
When I get mine I’m fitting it with castle 2028 if I can get it to fit lol and max 5
@christopherwilliams16524 жыл бұрын
Go to bicetybam channel he just put a max5 in his and a24 tooth pinion and it’s a beast
@AB-80X4 жыл бұрын
@@deontay79ify None of that will be possible. It's really a 1/6 scale. The motor mount is a 25mm, not a 30mm, and it runs a mod 1 pinion with a 5mm shaft, not a mod 1.5 with an 8 mm shaft. The motor is a 49, and there's not enough room on the sides for a 58 mm can. And lastly, there's not enough room length wise for a 114mm can either. What you need is the TP 4260CM in a 1490KV rating and the ZTW 300A ESC. That setup will be 12S capable.
@AB-80X4 жыл бұрын
@@deontay79ify You will also need these. www.towerhobbies.com/cgi-bin/wti0001p?I=DTXC5502
@kmodkese3 жыл бұрын
Which wheels, & tires are you using?
@zsaxeshed57434 жыл бұрын
Oh there it was yeahhh!!!
@hammerhome78794 жыл бұрын
What kind of run times are you seeing ?? its heavy ...
@lovswr4 жыл бұрын
Six Shooter, where did you get that awesome phone mount on the end of your transmitter? Did you make that yourself. I’ve been looking for something exactly like that because I don’t want to wear a hat.
@m4ini4 жыл бұрын
Is there a bashing video for the DBXL-E 2.0 in the making? Really interested in that.
@CCxRC4 жыл бұрын
Coming. Pinion slipped off spur in live video with it. Then I hit a corner wall on the oval track today at speed and broke a rod end. Have to order another and then it will be bash time. Just ran it today.
@m4ini4 жыл бұрын
@@CCxRC Cheers mate :)
@anthonydupont36943 жыл бұрын
How do you turn it up to 5 I lost my manual
@oneeyemonster32624 жыл бұрын
Just slap a 58x112 900kv-1200kv in it....Dunnn fight it... So can we get a Roller ( less motor /esc) for $500-$600.. so we can slap in our own bigger motor and 200A-250A esc?? ($350-$400)
@joshherrman32014 жыл бұрын
Did you use a program card to re program the esc or just go off the beeps?
@CCxRC4 жыл бұрын
Just used beeps
@martinflawless6753 жыл бұрын
How do you revive a battery that’s completely dead I have a Spektrum 14.8V 5000mAh 4S 50C battery I’m thinking about going with the zeepower batteries because I keep having problem with spectrum batteries and recommendation on the best batteries that will last also can you run one battery off the kraton
@CCxRC3 жыл бұрын
are they over-dishcarged? I've honestly never had any issues with my SPektrum batteries. Usually when my batteries haven't charged, it's because I accidentally over discharged them and then my charger wouldn't recognize the battery or kept giving an error. There are a few ways to revive those batteries if that is the case.
@martinflawless6753 жыл бұрын
Yes it’s giving me errors like no balance lead detected insert balance lead
@martinflawless6753 жыл бұрын
@@CCxRC so how do you fix it then if that’s the case
@ccxrcxtras65923 жыл бұрын
@@martinflawless675 I don’t like to give the way, because it’s potentially dangerous if done wrong. You might search about reviving a battery using NIMH charge mode to get it to levels the charger can read in LiPo mode. Best bet is to see if your local hobby shop can diagnose it.
@str8roller_68014 жыл бұрын
That steering is 'Sloth'.. Get yourself a nice ProTek servo.
@hidros14614 жыл бұрын
My old tmaxx 3.3 clocked at 46mph completely stock. This thing should be faster
@jayayers87444 жыл бұрын
Dang... I’m assuming you’re tmaxx is a 30 pound 1/5 scale rc
@stuart37124 жыл бұрын
What is the issue with its speed? The new center gear box and the gear ratio's could be it? Just wondering why they gone with that rather then the old direct pinion to center diff because seems like that choice lost a lot of speed but even then its power is lackluster. This is just my opinion but i think ARRMA goofed on this model big time as if they did not want it to be any better then all other 1/5th in terms of power and speed. Like i said before, the K8S on 8s runs like a K6S on 4s and my opinion, the K8S should of ran the same as a K6S on 6s and that is my modest opinion. Im not big on speed but 60mph out of the box and it doing that would of been perfect with the ability to do standing backflips and or leaving a trail of raw dirt on grass, that is what i was looking forward to this model. I love what the K8S is besides its power and its below stated speed for a 1/5th 8s truck Vs the others so if i were to buy a 1/5th, the DBXLE 2.0 would be it or a SRR even tho its a 1/6th(?).
@CCxRC4 жыл бұрын
You'll see some speed and power coming. I've been playing with motor timing and it gives it punch! For top end, i've got some new spur gears to get it up to higher speeds. I actually don't mind it's speed for bashing. Most guys want the speed to launch it way higher and further than any RC can actually handle stock without damage. I enjoy wathcing them do it, but I prefer to do big jumps, but not to crazy and it can already do that for me.
@die1225 Жыл бұрын
Mine does 55 out of box with the new gen ace basher pro 100c 8000mah batteries
@sir_puffs_alott_rc4 жыл бұрын
I need to get a link to that cellphone holder
@SixShooterRC4 жыл бұрын
You need to try higher C lipos and see what she dose
@CCxRC4 жыл бұрын
Six Shooter RC 100c got similar.
@SixShooterRC4 жыл бұрын
@@CCxRC I love my 100c 4s 7200MAH & my 7600MHA 75C Put them in there
@tmmtmm4 жыл бұрын
Anything more than about 40C is pure marketing - good lipos (graphene) can do about 30-40C and run of the mill lipos about 15-20C. 100C is a joke on any battery. It needs gearing to go faster as the motor power is falling over due to high rpm. Changing pinion will get the motor rpms down to where it is making more power and therefore go faster. Battery is not the problem as the stock motor probably doesn't even need 20C on the speed pinion.
@SixShooterRC4 жыл бұрын
@@tmmtmm yes I now it needs gearing to go faster my Bro has one & has a 23t pinion on his already & punch set to 5 & motor timeing at 12.5 have fun with you chepo lipos Venom are run of the mill lipos like traxxas lipos I have 50C 75C 100c & i can tell the difference that it makes Have a nice day
@jdpaslRC4 жыл бұрын
I saw the graveyard! Ghosts might be watching you and Kraton 8s. lol
@joseCalderon19764 жыл бұрын
I'm surprised that you don't put gorilla tape around your soft packs. One of my soft packs got ejected from my xmaxx 8s into concrete and nothing happened to it because of the gorilla tape 👍
@zsaxeshed57434 жыл бұрын
Oh man that thing is sick,you should jus ramp the road there from field to field lol it'll clear the road fosho
@chloeNlana4 жыл бұрын
Kevin Talbot has bent his chassis already!!!
@CCxRC4 жыл бұрын
I saw that! He stuffed it pretty hard at the skate park. RCs can only hand so much. This is a heavy machine. The energy has to transfer somewhere at some point. I don’t launch my 1.5 scale vehicle like I do the smaller ones. They are a lot more to repair.
@theirishaxe94054 жыл бұрын
You should try again and turn the motor timing up that will give you more top speed bro
@paulclancy24044 жыл бұрын
And bigger pinion
@AB-80X4 жыл бұрын
It does not need timing. It will just burn things up. It needs a 25 tooth pinion for the max speed.
@GreatLakesRC4 жыл бұрын
Gotta gear it up man 👍
@kevink.80484 жыл бұрын
Check out Eric at rc dude 81. He's geard it up to 23t, 11.5 timing and punch 5. Hits 51mph
@GreatLakesRC4 жыл бұрын
@@kevink.8048 Yeah man, already did 👍
@JR-ew6ek4 жыл бұрын
Why can't you say mph in title or video description?
@fredsosa38843 жыл бұрын
Whats your punch level the factory set it at 3 i turned mind up to 5...and its a hell of difference
@vibe2954 жыл бұрын
i think its sad that out of the box an 8s kraton goes as fast as as 3s senton
@deontay79ify4 жыл бұрын
U should try 26t pinion
@imserious21874 жыл бұрын
Venom makes good batteries
@cdarknessfalls264 жыл бұрын
You got it fix already
@paulfrodsham87164 жыл бұрын
Yea good stuff have you turne esc down
@joshchatwin81794 жыл бұрын
Would like to see a video on how you set your punch bro please
@CCxRC4 жыл бұрын
Arrma has videos showing how to program the ESC for these.
@bobtawilger3594 жыл бұрын
No wheelies???
@SHOKona-wp4vr2 жыл бұрын
I chose the XMAXX over this and glad I did. My buddies have massive issues with theirs and breakdown on every outing.
@________GHOST________4 жыл бұрын
It is not a true RC basher if a person can not bash in the rain period:/ I miss the old school RC trucks that was built for all types of weather :/ And at this price point this truck should be 90 mph stock with no upgrades on batts and gear section and where is the 2 speed trans period and that is way I will not buy this one.
@CCxRC4 жыл бұрын
You can bash this is the rain. It is fully waterproof. Where do you hear you can’t? That is misinformation. At this price you aren’t paying for speed, you are paying for size. And bigger size typically is slower. The motor is already larger to make it this size and push the weight and would have to be way more money to get a larger motor and bigger batteries to hit that speed. It’s also very dangerous at this size/weight at 90mph and shouldn’t be driven by just anyone.
@rushgush4 жыл бұрын
from 3s 1/10 , we went to 1/8 with 6s, and then ironically stop at 8s for 1/6-1/5 th. u would think it would of doubled to 12s for 1/5 lol but sadly way too expensive
@nobodynoone34284 жыл бұрын
It's just shy of 1/6 scale. 8s should be plenty.
@rushgush4 жыл бұрын
i know, but u get what i’m saying.? lol
@nobodynoone34284 жыл бұрын
@@rushgush Not really because I think 12s is too much for a 1/6 scale, unless it's way heavier than it should be.
@rushgush4 жыл бұрын
Nobody No One i meant how the cell increase in general. kraton is very heavy, 24lbs with no batteries.
@nobodynoone34284 жыл бұрын
@@rushgush The problem is that more cells means it would be much more expensive and it's already overpriced imo. Should have just made it lighter or put a better 8s system in it. Maybe a 1/6 version of the 3s line, but beefed up and tweaked, would have been a better decision for a big release like this.
@rosscartmel20324 жыл бұрын
looks like your top support bar is bent . becareful jumping it as kevin Talbot bent his chassis and top bar . not so strong after all .
@SixShooterRC4 жыл бұрын
#1
@Angel-dn9sm4 жыл бұрын
Chassi bent yet lol mine did on 22 thooth pinion
@CCxRC4 жыл бұрын
Whoa! No. Mine isn’t bent. Was yours from jumping?
@Angel-dn9sm4 жыл бұрын
@@CCxRC yes 8feet high right on front bumper it's still runs no problem yet from bend .
@imserious21874 жыл бұрын
Why is it so slow?
@CCxRC4 жыл бұрын
I can't speak for them, but my guess would be they geared it conservatively because both beginners and experienced people buy their products and it's a safety precaution for both the RC and what it could hit and damage. I've seen several photos of these destroyed on their first run by people that only wanted the biggest one for their first RC....then hit a light pole or curb....so apparently it can be hard to control even at these speeds. People that know what they are doing can easily change the pinion to a 23T or higher like i did and get more speed. Not sure why they put such a light diff fluid in the center though. those front tires want all the power.
@beetlebailey95104 жыл бұрын
The competition is the e-revo ? And mine does 50 stock lol great job Tony nice video 👍
@CCxRC4 жыл бұрын
E-revo would be competition to the 6s kraton. Just based on size and weight this would compare to an X-Maxx or CEN Reeper like the American Force Edition.
@nobleyoung44884 жыл бұрын
✌️😳✌️
@user-gl8ln5wy5f4 жыл бұрын
😄👍
@zacherykesler85084 жыл бұрын
Put a 1/5 gas engine in it somebody try it 🤔
@EXTREMERC4164 жыл бұрын
Up the motor angle at 11 degres or 15 an see if it goes faster
@gonzodetroitify4 жыл бұрын
What does this do pls,
@deontay79ify4 жыл бұрын
Wats that mean ?
@EXTREMERC4164 жыл бұрын
Setting on the esc who increases top speed overall
@gonzodetroitify4 жыл бұрын
@@EXTREMERC416 that's what it does but how, if this makes thanks
@206beastman4 жыл бұрын
My slash goes that fast on 2 s
@joshsmith72874 жыл бұрын
And your slash weighs a quarter to a third of what the kraton does......
@206beastman4 жыл бұрын
@@joshsmith7287 i dont have lil d syndrome thats y i like all the scale tamiyas i dont need a huge rc just a replica of a real car i cant afford doesnt have to be 5th scale
@codyviera924 жыл бұрын
Too bad. My shredder cost 360 and goes just as fast. If I. Gonna pay 900 I want 50 plus for sure.
@midwestboss88084 жыл бұрын
Gear it up and u will be much happier
@CCxRC4 жыл бұрын
Midwest Boss that’s the plan. I’d like to get an Arrma/Spektrum one for it because the new pinions are notched which is pretty cool.
@JUICY_TIME4 жыл бұрын
😁👏👏👍
@dirtrider882 жыл бұрын
2:12 if i lost a ONE HUNDRED DOLLAR gps meter in a field you could bet your ass im not going home till i find it. must be nice to have that kind of money where you could know the area where you lost $100 and not care enough to go look for it.
@imserious21874 жыл бұрын
I want one, but 900 bucks smh
@JakesFamilyRC4 жыл бұрын
LMAO @ muddle!!! Gotta love the made up words :-)
@fsrc28624 жыл бұрын
The muddle lmao ,😆
@Terry123454 жыл бұрын
Looks weak.
@206beastman4 жыл бұрын
Just looks slow cause its huge ima stay 1/10th for that money i could buy a real car or cycle
@stuart37124 жыл бұрын
Or Valve Index if you are in to that sort of thing.... Ill wait and see if anyone swaps out this motor and ESC and maybe mod the center diff setup for a direct pinion to diff setup and see if it turns out to be insane because $899 for this is not worth it at its performance tho the build is quite nice but they gone way to easy on this build....
@mauricehamilton4044 жыл бұрын
It's so slow dont think ill buy one now stick with my maxx
@pheepjay35374 жыл бұрын
For 900 and only 40 mph No thanks
@arlinjackson5032 Жыл бұрын
Go smart batteries venom sucks
@dirtrider882 жыл бұрын
1:02 the punch level on the 8s only goes to 5???? my would the 6s go to 9 but the 8s only go 5? edit: i did some digging and found that yes, the 8s only goes to level 5. page 17 here www.arrma-rc.com/on/demandware.static/-/Sites-horizon-master/default/dw2b4efa25/Manuals/ARA110002_DX3-Manual_MULTI.pdf
@BuyitBreakitFixit4 жыл бұрын
Beast of a rc! That is a respectable speed for not having an optional spur (xmaxx) or pinion. Takes a good beating too. Sweet video.