i put 20 th pinion how to change pinion gear on arrma v5 kraton. easy and simple. it is allsow good for arrma v4 kraton,talion,outcast... i wil upload in few weeks vid on diff oil change.thanks and SUBS !!
Пікірлер: 187
@RCRoads Жыл бұрын
Great job showing us the process. I like how you removed the E clip without loosing it. I sure do like the motor mount. I wish the 3s Arrma line of cars came with that setup.
@g.b-MTB-trail-jumps3062 Жыл бұрын
cool bro...thanks👌
@cam78583 ай бұрын
brilliant video thanks ,exactly the same as last comment ,just plain informative and good ,helped me sort my truck out thanks again
@g.b-MTB-trail-jumps30622 ай бұрын
Thanks alot mate
@amirulandsally122 жыл бұрын
Thank you very much for this video man. Helped me so much. Straight forward no bullshit talk etc thanks again
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks alot champ👑
@phillybrc2 жыл бұрын
Nice, I always appreciate the part numbers
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks champ
@therealMikeG1 Жыл бұрын
great video. thanks for the instructions. I would shorten the video a little bit though. waaay to long. thx again
@g.b-MTB-trail-jumps3062 Жыл бұрын
thanks ,mate💪😎
@MemphisMike901 Жыл бұрын
Perfect length for a Newbie tho. I feel like I can do this now. Just blew my Pinion out!
@ScutuRC2 жыл бұрын
Looks who's ready to go even faster... Good vid, Awesome stuff! Keep it up!
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks
@rubberduck46205 ай бұрын
Great video! Can you please tell me what size Hex/allen bolts are at the top that holds the motor to the motor mount. I have tried different allen wrenches and i cant find the right size. Thank you
@g.b-MTB-trail-jumps30624 ай бұрын
thanks mate. its 2.5 mm allen
@marksmithdiecast001 Жыл бұрын
Great instructional video! New sub here! Thumbs up!
@g.b-MTB-trail-jumps3062 Жыл бұрын
thanks alot champ
@saltylocal69173 жыл бұрын
Many thanks! Love your straight to point video! My only question, how do u know your pinion and main gear are meshed properly?
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks for coment mate🤙 You can see on the "manual book"..not to tide and not to loose.. Small gap and small playing. How to check isely..? On cassis you have hole...with the spur,play with him and you can feel small gap or big gap...hear the 'nak'..(spor nak on the pinion.) Sory about my write..😁 Enjoy bro...good luck
@RCInsiders2 жыл бұрын
Great info. To the point & easy to follow. Well done my friend 👍👍
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks alot mate...enjoy
@RCorDIE2 жыл бұрын
Awesome to have this information on that model. Thx.
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks alot bro
@mohdfaizalajun_tv2 жыл бұрын
an easy-to-understand picture.. greetings from Malaysia
@g.b-MTB-trail-jumps30622 жыл бұрын
Tjanks
@mohdfaizalajun_tv2 жыл бұрын
@@g.b-MTB-trail-jumps3062 don't forget to support my channel again friend...
@g.b-MTB-trail-jumps30622 жыл бұрын
@@mohdfaizalajun_tv sure bro..great view. I already write😇
@MrValelove2 жыл бұрын
Thank man, very good video... I put a washer between pignon and cruscher clip
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks mate
@scottb00753 жыл бұрын
Glad I played the Operation board game as a kid!
@g.b-MTB-trail-jumps30623 жыл бұрын
Hahaha...good luck bro...enjoy🎉
@DUY954-KenhPhuTuongTac Жыл бұрын
Great job, so amazing to watch your video 💯💯💯💯💯
@g.b-MTB-trail-jumps3062 Жыл бұрын
Thanks alot mate
@Hotbox433 жыл бұрын
Good way to help those that need some pointers. 🎯✊🏽 merry Christmas champ 🎄
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks champ👑
@mauricebooker151923 күн бұрын
Nice 👍 work
@g.b-MTB-trail-jumps306223 күн бұрын
@@mauricebooker1519 thanks champ😍
@g.b-MTB-trail-jumps306223 күн бұрын
@@mauricebooker1519 thanks mate
@One.Tworc123 жыл бұрын
Great Video! Helped me out big time!
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks alots bro... Dont forget subs. 👑
@stergios773 жыл бұрын
Thanks brother it’s so helpful (Do you play PUBG?)
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks mate.. No brotha..😕
@rizalrohimtek Жыл бұрын
where is the new video friends..why haven't you uploaded it yet..I think videos like this are very interesting..let's try again.
@g.b-MTB-trail-jumps3062 Жыл бұрын
Thanks champ...you need help?
@dirtrider882 жыл бұрын
why would you take the motor out? i put a magnet under the pinion to catch the circlip. pushed it off from above than all you need to do is line up the set screw with the slot in the motor mount like you have to do even if you take the motor out. putting it back together is just as easy, remember to put a magnet under there again in case the circlip pops off while trying to put it back on but i didnt have any issues.
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks bro
@c-historia Жыл бұрын
thank you for this fantastic video 👌
@g.b-MTB-trail-jumps3062 Жыл бұрын
Thanks alot mate
@c-historia Жыл бұрын
@@g.b-MTB-trail-jumps3062 have a nice day 🙌
@ovidiuschley33462 жыл бұрын
Wow , amazing work !🏅🏆👍🏻🎩👌🏻
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks mate
@wasim3512 жыл бұрын
ماشاءالله
@9to5ers_podcast3 жыл бұрын
I have everything unbolted but my motor doesn't want to slide out any tips?
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks for coment bro If the two screws are loose he should come out, maybe play with him until he comes out
@Kakatouring Жыл бұрын
very nice rc car guys, looks very expensive
@g.b-MTB-trail-jumps3062 Жыл бұрын
thanks mate
@calumflemingsrcs22133 жыл бұрын
Nice replacement these cars are very nice 👍👍🔥🔥
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks
@andy-tu2rx2 жыл бұрын
What size is the grub screw and are the pinions .06 mod
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks for comment champ Its Mod 1 5mm You can see in "amainhobby" site. Arrma kraton 6s pinion...
@fredfredrc Жыл бұрын
great video
@g.b-MTB-trail-jumps3062 Жыл бұрын
Thanks mate
@t..s..83312 жыл бұрын
Love your content My friend and keep in touch
@g.b-MTB-trail-jumps30622 жыл бұрын
thanks mate
@G9RCCar3 жыл бұрын
Awesome RC. Very cool bro.
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks bro👑
@nasles1538 Жыл бұрын
Very good Video 👍
@g.b-MTB-trail-jumps3062 Жыл бұрын
thanks alot champ
@GyuHobbyRC3 жыл бұрын
Thank you for sharing good information.
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks bro👑
@jsneds3472 жыл бұрын
If the pinion is not perfectly straight with the spur gear, what type of issues could you expect?
@g.b-MTB-trail-jumps30622 жыл бұрын
You must straight... Release the small 'pinion screw'...and fit him to the spur... And than tide.. Thanks for coment bro
@g.b-MTB-trail-jumps30622 жыл бұрын
I cant coment on your 8s power outcast vid😇
@jsneds3472 жыл бұрын
@@g.b-MTB-trail-jumps3062 thanks for the feedback brotha.
@jsneds3472 жыл бұрын
@@g.b-MTB-trail-jumps3062 lol that was right out da box brah, it’s my Notorious that I’m having issues with, seems like every time I try to upgrade, I end up F’n something up somehow. It almost seems stock parts is best .
@RCplamodel2 жыл бұрын
*Thank you for sharing a good video with a nice car!~~~^_^*
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks mate
@jarmilahanova45552 жыл бұрын
Wow, super 👍 !
@g.b-MTB-trail-jumps30622 жыл бұрын
thanks mate
@TukangKomentDoang3 жыл бұрын
Thanks for turtorial bro🎉🎉🎉👍
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks champ
@Mountain.Crawlers.RC.Europe Жыл бұрын
Very good work friend☺️💪💪👍
@g.b-MTB-trail-jumps3062 Жыл бұрын
Thanks champ
@DanJr007_Collectibles Жыл бұрын
Great video mate 😊😊😊
@g.b-MTB-trail-jumps3062 Жыл бұрын
Thanks champ
@boomerak47742 жыл бұрын
Changed my kraton v5 to the 15 tooth pinion today. Thanks for the video. The stock 12 tooth stripped. Do you think the 15 tooth will overheat the motor?
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks mate You run 4s or 6s? You have fan on motor?
@boomerak47742 жыл бұрын
@@g.b-MTB-trail-jumps3062 6s and yes I have a heatsink and fan on motor
@g.b-MTB-trail-jumps30622 жыл бұрын
You can go until 18...and check hit sometime..
@boomerak47742 жыл бұрын
@@g.b-MTB-trail-jumps3062 thanks for reply!
@CamelTrophy-HK11 ай бұрын
👍👍👍👍
@g.b-MTB-trail-jumps306210 ай бұрын
Thanks
@tanksandairsupport4575 Жыл бұрын
Nice job bro :)
@g.b-MTB-trail-jumps3062 Жыл бұрын
Thanks bro
@Marlon-vu5pq22 күн бұрын
👍🏿
@g.b-MTB-trail-jumps306222 күн бұрын
Thanks
@Daywalker_272 жыл бұрын
I’m three days in to the RC world. I just finished a run, pulled the body off to remove the battery and found my pinion gear laying on the floor of the chassis with no clip anywhere to be found
@g.b-MTB-trail-jumps30622 жыл бұрын
😕 yes...the clips somtimes run out just tide the screw of the pinion...and maybe some locktide thanks mate
@thischildishlifestyle3 жыл бұрын
Cool 😎
@RCBirds2 жыл бұрын
good explaination👍
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks dude
@chrissmarduksrccarcarnage49403 жыл бұрын
Looks awesome Man...Go and bash this clean Thing through the mud...😇🤘
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks brotha🤙
@damaylaphoenix11552 жыл бұрын
i love those e clips lost alot !
@g.b-MTB-trail-jumps30622 жыл бұрын
Right dude... Thanks
@mojojoji54932 жыл бұрын
You literally skipped steps do we leave the crush tube out??? Who knows very bad information
@jairomartinez39102 жыл бұрын
Honestly
@thomassullivan3703 Жыл бұрын
Lol right plus the small spacer filling, the "C-Ring" an the gear , 🤣🤣🤣so you don't show people how to secure the gap behind the gear an between the gear an the c-ring just depend on the grub screw people. The cats got this guy's tongue people 🤣🤣🤣 I hope people not blind because it's all kinds of stuff missing with this one here , WHERE THE MUSIC COME FROM 🤣🤣 I'm having a hard time trying to find something to subscribe to . WHERE THAT DOG AT THAT'S BARKING IN THE BACK GROUND 🤣WHAT HE OR SHE BARKING ABOUT . let's find out what's going on 🤣
@mojojoji5493 Жыл бұрын
@@thomassullivan3703 lol the music is to much of a vibe it’s distracting 😂😂😂😂
@XtaBeken2 жыл бұрын
good..
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks mate
@bygun53293 жыл бұрын
good job buddy👍🏻
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks dude👑
@chrissmarduksrccarcarnage49403 жыл бұрын
Was machst n du hier. . .😇🤘
@bygun53293 жыл бұрын
@@chrissmarduksrccarcarnage4940 ist ein abbonent! der junge ist top! macht geile vids und hat megageile karren!🏎💨💯
@gamesgonenuts Жыл бұрын
some high quality work on this today
@g.b-MTB-trail-jumps3062 Жыл бұрын
Enjoy champ
@alvaro6752 жыл бұрын
Buen video 👌 nice vídeo thanks
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks champ👌
@Shino13132 жыл бұрын
Wow keren
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks
@tyshiddejuremanbey1313 Жыл бұрын
Got the same torch, 🤷🏿♂️!!!
@g.b-MTB-trail-jumps3062 Жыл бұрын
Hey champ.. i didnt understend...you change the pinion..? Wow much ?
@tariqkhanworld60242 жыл бұрын
Ayaan family vlog Malaysia
@g.b-MTB-trail-jumps30622 жыл бұрын
thanks mate
@TheTylerjoy042 жыл бұрын
Any Heating Issues When Installing The 20t Pinion Gear?
@g.b-MTB-trail-jumps30622 жыл бұрын
Its high pinion....but im little crazy😇 I have also two fans on the motor. You can put 16 pinion if you run on 6s Thanks champ
@TheTylerjoy042 жыл бұрын
@g.b jumps & bashing Cool! Do Have A Running Video??
@erjonvuktilaj12862 жыл бұрын
You forgot threadloack on the motor mounting screws
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanks alot bro
@rccartv8983 жыл бұрын
Video good friend👍👍💯💯
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks dude
@shogun13 жыл бұрын
I am waiting for e clips. Would I be okay to run my 15 tooth pinion once or twice without it in place? Thanks
@g.b-MTB-trail-jumps30623 жыл бұрын
Yes bro..you can. Like v4,v3...ther is no e clip. This is just in case that pinion no go out from the shuft. Just be shur the pinion screw tide good. Good luck bro..thanks for coment
@shogun13 жыл бұрын
@@g.b-MTB-trail-jumps3062 Thanks. I am now going bashing. 🤟👍
@oloap723 жыл бұрын
Ciao, for heating what do you use exactly? Can tour link it? grazie!
@g.b-MTB-trail-jumps30623 жыл бұрын
Sory bro... You mean wich fan i us for the engine and esc?
@g.b-MTB-trail-jumps30623 жыл бұрын
For heating...? Im us for fans...
@oloap723 жыл бұрын
@@g.b-MTB-trail-jumps3062 Hi, i mean to warm the pinion which flame lighter do you use? Moreover when you fit the new pinion, you forgot the crush tube that fits into the shaft or no? Grazie
@MrValelove2 жыл бұрын
@@oloap72 effettivamente il pignone risulta più corto, io davanti e dietro ho messo dei distanziali di plastica
@chuckdzx3 жыл бұрын
Just curious but why take the top brace thing off?
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks bro... You mean the "e clip "
@chuckdzx3 жыл бұрын
@@g.b-MTB-trail-jumps3062 No the the handle thing above the center diff
@g.b-MTB-trail-jumps30623 жыл бұрын
@@chuckdzx More comfortable to work that it is disassembled bro
@chuckdzx3 жыл бұрын
@@g.b-MTB-trail-jumps3062 Cool,prolly easier to set gear mesh
@BA-ev4cq3 жыл бұрын
Good vid man!!!
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks bro👑
@BA-ev4cq3 жыл бұрын
@@g.b-MTB-trail-jumps3062 i have the arrma typhon 2s and 3s and just got the 6s kraton....my 2nd drive with 3s typhon the motor blew......anyway i don't know sh t about rc im learning..i just turned 45 today...i like driving my cars but i think it makes me happier when i see other people enjoying too much appreciated ✌🇺🇸 6/12/21 were still free✌
@g.b-MTB-trail-jumps30623 жыл бұрын
@@BA-ev4cq great hobby mate...😇. Du good maintenance..its the best way to get full power from your kraton. My kraton v5 6s, 6slipo,50spur (Stock), 20 pinion
@rcc.c.91043 жыл бұрын
Which lipos do u use? 4s or 6s?
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks for coment bro.. Im runing just 6s With motor fun ..
@AyaanFamilyVlog2 жыл бұрын
ayaan family vlog Malaysia fyh
@g.b-MTB-trail-jumps30622 жыл бұрын
Thanka
@rcboy6s9093 жыл бұрын
Wat was the torch for ?
@g.b-MTB-trail-jumps30623 жыл бұрын
thanks for coment bro...what ?
@nick_stag3 жыл бұрын
So do you not need the crush thing
@g.b-MTB-trail-jumps30623 жыл бұрын
Yes bro...you need. This is kinde of "spacer"
@nick_stag3 жыл бұрын
@@g.b-MTB-trail-jumps3062 thanks man I enjoyed your vids today
@shaundawson57212 жыл бұрын
Yeah I watched the video I put it back together without the crush ring because in your video it doesn't show put it back in
@MainansieBocah3 жыл бұрын
Nice 🙏
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks champ
@alifthn2 жыл бұрын
jos
@g.b-MTB-trail-jumps30622 жыл бұрын
thanks mate
@madrc97812 жыл бұрын
yes yes you got it out all too easy i got the screw stuck where you remove the motor and the fucking screw in the pinion i tryined cut it out of it whit dremel :DD
@g.b-MTB-trail-jumps30622 жыл бұрын
🤒 Sometime ther is" lock tide" ...so you must to warm this up. And good screw. Im use in mip screw. Thanks for coment champ👑
@madrc97812 жыл бұрын
@@g.b-MTB-trail-jumps3062 btw i need buy for it maybe new motor if i buy i take 1650kv but gonna be mext year stuff then... i did try cut the pinion off but idk where is the screw anymore i think i did cut it already off but cant take still the pinion out of it
@timreed96063 жыл бұрын
I can't get the mesh right
@g.b-MTB-trail-jumps30623 жыл бұрын
Thanks for coment dud.. Why..?
@timreed96063 жыл бұрын
@@g.b-MTB-trail-jumps3062 not sure I guess I'm getting the gears to close together ill put it in then try to run it and it makes a loud ads sound like they are grinding together but if I pull it out then the pinion doesn't even catch the spur I guess it just trial and error
@g.b-MTB-trail-jumps30623 жыл бұрын
Yes I know ... Do not worry bro it's just a practic. Look...you need to put the pinion much closer as you can...than pul out little bit..you need small gap between them..and than tide one screw..and chek.. If it is ok...tide the secend screwe