Bro. Thats what I luv so much too. All the testing and adjusting... Great video!!!
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@rcguygarage4 жыл бұрын
Love the "test ń tune" time
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@bobaque704 жыл бұрын
Nice Earl Earl
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@EugeneRCDrezgalovo48rus4 жыл бұрын
Very good 👍🔥🔥
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@rattlecanonlexan8364 жыл бұрын
Great test and tune!!!! Keep it up
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@williamstallings39693 жыл бұрын
Not to be disrespectful to anyone for being curious about tuning rc cars, trucks, airplanes or whatever but it never fails when you're trying to make a video and do some testing, someone will just about always walk up and start asking a ton of questions etc. Sometimes it can be really frustrating. Lol. Love watching your videos!
@earlmoorhead55553 жыл бұрын
Yes ⚠️⚠️😜😜
@rcsfinest18834 жыл бұрын
Awsome tune session Earl its comeing around looking good not easy as i see alot of work thanks for posting...
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@badbrad15642 жыл бұрын
I’m running around 0.5 132’ times limitless
@norcalrc4 жыл бұрын
The sky Rc analyzer is sick bro
@earlmoorhead55554 жыл бұрын
Yes I agree 👍👍💯💯🔥🔥🔥
@LETUBME4 жыл бұрын
Adjust your rear spring on the right side but if the spring is maxed out give more load on the left side & tighten down right. Adjust droop on all 4 arms & spring on the front right. The car drives & pulls to the left Once a car is dialed in it doesn’t matter what the angle of road it’s on it won’t kick out like that. You also might want to use prep for more traction. That will stop the chunking of foams. Just my input since I drag & I run 1.8s 👍🏾
@earlmoorhead55554 жыл бұрын
Nice 👍
@TheRealJayBrown3 жыл бұрын
I run 1.8 with a 160amp spectrum esc and 2050kv motor . 50t spur 24t pinion . Tire prep Wheelie bar Stock rally shocks .
@nu-nu9702 Жыл бұрын
@@TheRealJayBrown what car was that on
@dragonballsee4 жыл бұрын
I saw the notification as soon as you posted but I couldn’t watch it because I was busy but I’m here now
@earlmoorhead55554 жыл бұрын
Awesome appreciate the support 🙏👍💯💯💯💯
@teddywoods1444 жыл бұрын
I’m really diggin the limitless’s!!!
@earlmoorhead55554 жыл бұрын
Thanks 🙏 me to 👍👍💯💯💯💯
@rcguygarage4 жыл бұрын
That front splitter😱😱😱 them are a couple bucks. I've MASHED the stock Arrma one but am able to bend it back
@earlmoorhead55554 жыл бұрын
Yes and real weak 👍👍💯💯💯
@KurtsRCs4 жыл бұрын
Nice test rips it looks like you are close and those lights help a lot even for us to see it coming back
@earlmoorhead55554 жыл бұрын
Thanks 🙏 I agree 💯💯💯
@TheMrTJOX4 жыл бұрын
Hey man, I love your channel.
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@hawgwildproductions8590 Жыл бұрын
Lock those diffs up. Lower and stiffen it up.
@woodycreasman82264 жыл бұрын
That was some pretty good runs at the end👍👍
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@rcpd31574 жыл бұрын
You are trying to shave off a 0.5 seconds? That's a hefty goal! Good luck! You will get there.
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@2001Tauruswhite4 жыл бұрын
Good update. Hopefully you can find a more leveled road like an empty parking lot. I noticed that when I started the whole no prep drag racing. I forgot that roads have a slight pitch so the water can drain in the sewer drains. Your neighborhood street would almost be perfect if you didn’t have the speed bumps or traffic.
@earlmoorhead55554 жыл бұрын
Yes I just wanted to test the event road so I know the set up for next time 👍👍💯💯💯
@jamesgeorge6094 жыл бұрын
EARL,,,do you think the driveshaft rubbing inhibits the diff any?
@earlmoorhead55554 жыл бұрын
The bearing takes a beating idk if the rear diff is effected 🤔🤔
@motortoys99424 жыл бұрын
Can't you just set it out a couple MMs right off the bearing? That's what I did
@teddywoods1444 жыл бұрын
What good my brotha, hope all is well...
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@seanmccormack58884 жыл бұрын
Hi Earl, what is the sky RC unit called that your phone app gets the data from? Thanks Seano
@earlmoorhead55554 жыл бұрын
Sky rc analyzer 👍👍💯💯💯
@seanmccormack58884 жыл бұрын
@@earlmoorhead5555 thanks
@relaxingdeepvoiceasmr81504 жыл бұрын
The video I posted was the last one I won. Its going to be way more people this Sunday. But just to give you a heads up on how we race. Also check your dogbones and bearings. That may be tge reason for your pull
@earlmoorhead55554 жыл бұрын
Yes the rc was just torn down and completely gone thru the rear dive shaft is no good I know this is bad but everything else is mint 👍👍💯💯💯
@xch3no24 жыл бұрын
Now that I have 107mm rear tires I will upgrade my limitless with the gp5/6 gears, the big tires just didn't look good/right on my v2 tho...
@earlmoorhead55554 жыл бұрын
Nice 👍
@andrewwhiting55264 жыл бұрын
That's a lot testing 👍I could hear a noise up the top end was that wheel spinning or tyre's rubbing on the bodywork? Do you have a beacon for whenever you get the rc's out on the road for the traffic to pick up 😂
@earlmoorhead55554 жыл бұрын
That’s the rear drive shaft Flexing hitting the support brace 👍👍
@andrewwhiting55264 жыл бұрын
@@earlmoorhead5555 I forgot about that 😂
@kevincox39644 жыл бұрын
Bro I was just there this morning
@edwardgrant27174 жыл бұрын
🤔
@earlmoorhead55554 жыл бұрын
Nice 👍
@burn1gotbeats4 жыл бұрын
Do foams last longer because I’m running through rubber tires kinda fast 💨 lol
@earlmoorhead55554 жыл бұрын
No foams chunk out and tire no good after that if they slide sideways the rear apart
@burn1gotbeats4 жыл бұрын
@@earlmoorhead5555 thanks 🙏 I definitely value your feedback .
@earlmoorhead55554 жыл бұрын
Thanks 🙏
@jamesgeorge6094 жыл бұрын
EARL,,,do you have 20,000,00 in the front diff? Does the road have steep slope..
@earlmoorhead55554 жыл бұрын
I have 1 mill front diff and yes the road has a bad slope for sure 👍👍💯💯💯
@wethepeople4204 жыл бұрын
I had a Traxxas jado and roasted the tires off every tank of nitro. I had it going 97mph
@earlmoorhead55554 жыл бұрын
Nice 👍
@kylekramer12603 жыл бұрын
How do you make the jato go 97? Stock motor?
@wethepeople4203 жыл бұрын
@@kylekramer1260 gearing
@wethepeople4203 жыл бұрын
@@kylekramer1260 it’ll eat the tires off it lol They usually explode just before the end of a tank of nitro
@grc97934 жыл бұрын
Is that where we're racing? And how do you set up drag on that analyzer? Tell me about that event in Compton. I wanna check it out. I just went a spot in Paramount sunday that just passed and it was pretty cool. Had drag, track, & bash spot. I had everyone loving me back flipping Maxxine tha XMaxx.✌😎
@earlmoorhead55554 жыл бұрын
Awesome 👍👍💯💯💯💯
@grc97934 жыл бұрын
@@earlmoorhead5555 where's that event in Compton?
@zeikbridges76414 жыл бұрын
Off Wilmington and broadwick!
@grc97934 жыл бұрын
@@zeikbridges7641 Got it thanks. What hood is that?
@zeikbridges76414 жыл бұрын
This part not a bad part it’s basically Carson . It’s in a industrial area nothing big big open wide long roads that we race on .
@strangere40633 жыл бұрын
What are the weight of your diff. Fluids? And do you run a center diff or would that be counterproductive?
@edwardozamudio91014 жыл бұрын
Quick question, do you build limitless? If so, how much?
@earlmoorhead55554 жыл бұрын
I don’t build for ppl I don’t know friends and family sorry 🙏🙏
@edwardozamudio91014 жыл бұрын
No worries, I just been enjoying the vids and thought I would ask.
@earlmoorhead55554 жыл бұрын
@@edwardozamudio9101 appreciate the support 🙏💯👍👍
@arrmaboy_65084 жыл бұрын
How did you get that red kit
@earlmoorhead55554 жыл бұрын
Rcspeedmonsters.com built to order 👍👍💯💯💯💯
@clintcava13444 жыл бұрын
You need to adjust springs not droop screws
@earlmoorhead55554 жыл бұрын
Spring was maxed out road was to sloped so at that point you need to adjust to the road groves and slope and then springs or you’ll just mac spring tension and still pull like I did 👍👍
@arimartinez92934 жыл бұрын
The limitless looks frustrating. It's always shifting and can never even really send it in a straight line.
@earlmoorhead55554 жыл бұрын
Just takes time setting up the remote controller to add in power that the road can hold also castle links a great tools to set it up never have I use the full power on my combos yet 👍👍💯💯💯💯
@dragonballsee4 жыл бұрын
I’ve lost the pinion once At like 70 kmh lucky I didn’t break anything
@earlmoorhead55554 жыл бұрын
Yes it happens as we change gears a lot drag racing 👍👍💯💯💯💯
@rpmwithabdullah34734 жыл бұрын
bro what r u fldoing change those rubbish tyers with foams
@earlmoorhead55554 жыл бұрын
I tested all the tires that day and the hoons and foams ran the same times 🤔🤔🤔🤣🤣🤣🤣
@motortoys99424 жыл бұрын
Try Hoons Golds bro. They wear fast but they are my go to 8th Mile tire 😂
@zeikbridges76414 жыл бұрын
Let me know if yu want to come out ! I can send your flyer and address ! See you there
@allentraylor56594 жыл бұрын
Not worth the trouble...,. Can barely even make them drive straight.
@andrewwhiting55264 жыл бұрын
That's the challenge of it😀
@MacSide014 жыл бұрын
The Limitless does move on rails. Check out this video (0:51). 132ft - 1.87 sec - 79 mph. kzbin.info/www/bejne/jXnSoWCheMhlps0&ab_channel=UAERCADDICTS%27
@allentraylor56594 жыл бұрын
@@MacSide01 if you launch it, soft enough
@MacSide014 жыл бұрын
@@allentraylor5659 Well, launching is important, however, this driver managed: 132ft - 1.87seconds - 79 mph. Notice at 0:51 of video. Straight and aggressive. kzbin.info/www/bejne/jXnSoWCheMhlps0&ab_channel=UAERCADDICTS%27
@earlmoorhead55554 жыл бұрын
I’ve been racing my whole life real cars I should say so this is another rc goal of mine testing tuning learning is never ending you can’t compare different tracks or roads all I can do is try and make a clean pass everytime in an event normally the fastest rc never wins just consist rc but I love a challenge for sure 👍👍💯💯💯💯