ARRMA OUTCAST 8s EXB v2 vs the big ramp

Really put that ‪@GarageLifeRC‬ 8s ARRMA wing mount to the test.... launch after launch off the ‪@freshpark_‬ ramp and this mount took every bit of it with NO issues.
this is one tough truck and only issue i ever really have is the driveshafts bending every single run and i honestly think its time for some full beefcake ones from the worlds BEST ‪@m2cracing168‬...
THANKS FOR THE SUPPORT please LIKE an SUBSCRIBE if you wanna see more content
HUGE thanks to KCrc for the ramp (link below)
HUGE thanks to ​⁠@ChinaHobbyLine (link below)
HUGE thanks to M2C racing (link below)
✅⬇️⬇️ ✅⬇️⬇️
SUPPORT THE VETS:
Operation RCs For Vets 🇺🇸 🪖🫡 💥
www.paypal.com...
Links may be affiliate links that I could make a small commission off of a qualifying purchase (this does NOT cost you any more) an really helps the channel
CHANNEL SPONSORS
CNHL batteries:
bit.ly/3JPaGxS
Facebook @ www.facebook.c...
HOBBYWING NORTH AMERICAN:
www.hobbywingd...
/ hobbywing.na
Hitec:
hitecrcd.com/
RC PALs network:
www.facebook.c...
M2C for all your EXTREME bashing need:
m2cracing.net/
RC4us merch shop:
rc4us.myspread...
KCrc upgrades and ramps facebook:
www.facebook.c...
KCrc website:
www.kc-rc.com/
Garage life rc website:
garageliferc.com/
RAMJAM racing
Website:
ramjamracing.com/
Facebook:
www.facebook.c...
KZbin:
/ @ramjamracing
ARRMA SKINZ the toughest chassis skinz on the market get yours here:
www.arrmaskinz...
Team Corally:
corally.com/
Official Facebook fan page
www.facebook.c...
What powers RC4us
HOBBYWING , CNHL, M2C
Anyone wanting to sponsor the channel or have a review done by me please email at
[e-mail]
AFFILIATE LINK:
RC4us Amazon store front the easiest place to find all the products I use for bashing an my content:
www.amazon.com...
List of all the cars on the channel
ARRMA FIRETEAM 6s m2cified
ARRMA OUTCAST 8s EXB rtr
ARRMA OUTCAST 6s m2cified
ARRMA OUTCAST 4s v2.5
ARRMA KRATON 6s EXB v2 rtr
ARRMA KRATON 4s XXL
ARRMA KRATON 4s v2
ARRMA MOJAVE 4s
ARRMA INFRACTION 3s blx
ARRMA INFRACTION 6s
TRAXXAS SLEDGE m2cified
TEAM CORALLY KAGAMA 6s
AXIAL SCX24 jeep
LOSI MINI-T
ARRMA GRANITE GROM
ARRMA TYPHON GROM
1/18th ECX RUKUS
BEZGAR HP161

[@charliesschroedinger]

Let us know that you're good with life guy. Last we knew you were selling stuff for personal reasons the week we were expecting the giveaway. Next day, new posts. New things crackin' for ya which is awesome and what we all want to see. But the roller coaster is confusing to follow. Much love. Hoping all is well but tough to gauge from where I sit. Sorry if this upsets you. Just want to know you're good my guy ❤ You're the only one my wife and I trust for great info and reviews and help.

[@RC4us]

@@charliesschroedinger ok so these videos are way behind life this was recorded weeks ago my friend I've had this wing mount a little while just don't get out to rc daily like some so my videos are always behind I have like 5 more videos to to edit... the 4s KRATON has been sold and hopefully I don't end up having to sell this one... When I go rc I take multiple cars and record and release the videos as I can or by importance like this day you've already seen the 4s outcast but next should be the EXB v2.... Life is still not the best but the reason for selling a few is because we somehow lost the key fob to the new car (650$) just for the key fob plus gotta tow the car 50 miles to the closest Hyundai dealer to have it programmed ( 275$ for the tow plus 200$ to program) and this is after having the car impounded from the parking lot it was parked in when the key fob was lost.... and that is just 1 thing that's going on... You can always message me if you're concerned or want more info.... The giveaway is about to be announced just getting everything all together idk if you ever paid to ship a lipo but it's very expensive and these giveaways come out of my pocket for the most part this will be the 1st time I've posted one with a sponsor.... Hopefully that clears everything up... and if not or you wanna ask anything else shot me a message as you know I always respond lol Thanks for the support I also changed that post the next day cause I didn't want people feeling sorry for me

[@charliesschroedinger]

@RC4us don't worry about that giveaway. We're all here regardless. And thank you for the update. The hobby is one thing. Your life and family are FAR more important to anyone that cares. And we certainly care. We're loyalists. And you absolutely have ours! Much love. And wicked appreciate the continued uploads. ❤️👍 You put out more valuable information than most. And it's the honesty of it that attracts us. And doing while trials and tribulations surround you is to be respected and honored.

[@johnsorensen5758]

Add some droop screws to the arms to stop breaking shocks

[@RC4us]

@@johnsorensen5758 I have 2 in each arm still bending driveshafts every run this is my very 1st ever shock issue and I've had this since it was released

[@johnsorensen5758]

@@RC4us my driveshafts bend alot als on a real bad side landing my xmaxx also I think it's because the arms are so flexible they don't break they just flex so much the shafts bend the arma arms used to break but I think they improved the plastic now we get bent shafts 🙂

[@RC4us]

@@johnsorensen5758 agreed I think the plastic on ARRMA 8s has improved but on the 6s they've gotten bad or had a bad batch my exb v2 has already broken 5 of the 6 on the trucks.... it's crazy and the 4s arms are built exactly like the 8s arms and work pretty good but the chassis plastic especially around the hinge pins support.... but I'm not mad I've EXTREMELY hard on my cars.... I'm thinking of just getting M2C racing beefcake drive shaft and their shock kit

[@johnsorensen5758]

@@RC4us those look good or just Land on all 4 everytime 🤣

[@RC4us]

@@johnsorensen5758 really wish I was better 😂 but I'm getting it lol

[@rctezluh42069]

my fresh park ramp is killing my Arrma's 😂😂😂

[@RC4us]

@@rctezluh42069 they can lol

[@rctezluh42069]

got to remove those casters man, they are gonna get ya!!! ask me how i know!!

[@RC4us]

@@rctezluh42069 I can't move this thing around with out them so until I figure that out they gotta stay lol

[@rctezluh42069]

⁠@@RC4us I know but it takes only a minute or three to remove them, I've said this before but the casters ripped off both left-side arms on my Typhon 😮

[@RC4us]

@@rctezluh42069 but I'm already talking a extra 10min cause I have to make it 2 pieces to fit in my car so now we're up to 15 minutes and I have to do that to put it in the car then when I get to the spot then again to pack it up and then a 4th time once I'm home that's a lot of work to bash a few hours

[@RC4us]

@@rctezluh42069 you know I guess I've been really lucky with those caster come to think of it this isn't the 1st comment I've gotten about this lol but I generally don't even hit them I normally ramp shave the other side and I've only done this a few other times in the last year of owning it lucky for me I guess will probably take ripping a few arms off b4 I actually remove them lol