Arrma Talion EXB Unboxing and Review

[@PaulSantora]

I got the Armma Talion 6s red canopy. The Absolute best 6s on the market. It has better Acceleration, pickup ( yes even with the high speed gear installed) better Cg ( Center of gravity) . When i first layed eyes on the Talion I fell in love.. I highly recommend it. Bar none. That and the Typhon. They might be expensive but damm was worth it. You'll have years of quality fun.

[@AJJAMStudios]

Well said. They are both awesome. Thanks for commenting 😎👍

[@PaulSantora]

@@AJJAMStudios Anytime your video kicks ass. Why because I am Away from my home right recovering in the hospital and when.. I saw your video I was yeaaaaaaa I immediately thought of my Talion That I only used 2 times because I am not trashing and bashing a $600 rc truggy. One specific detail That caught my attention about the Talion is when I bought my Blue Typhon that I got on sale back in 2017 for 420$ is the way the Talion sits really low to the ground. I couldn't afford it at the time so I promised myself and 4 years. Later I got it. I have not regrets.

[@Rammers13]

Still the best RC reviewer on KZbin 🙌🏻

[@AJJAMStudios]

Wow, thanks! We really appreciate that here. 😎👍

[@savagex466-qt1io]

@@AJJAMStudios Are you in the Oakanagon British Colombia Canada ? Im not being snoopy on were you are raceing but If I were a gambling man Id bet heavy that you are ! Just the small thin trees plus super dusty trail looks like what I use to work in ha ha love your channel

[@savagex466-qt1io]

Such good advice. Thanks so much man.

[@goofbtw]

Just purchased mine an hour ago ! So ready for it to come in!!! Great quality video btw 👍

[@AJJAMStudios]

Awesome! Thank you!

[@goofbtw]

@@singletrackslim hasn’t missed a lick

[@todddean6]

Dude, awesome channel. Great info. I like how in depth you are

[@AJJAMStudios]

Thank you. 😎👍

[@barneyrebel0123]

RPM arms front and rear are always the first thing I change, on ALL of my offroad RC cars and trucks. They simply make the best.

[@AJJAMStudios]

Totally agree. The materials they use are simply better. Their products are more flexible, handle cold weather better, and take a pounding before breaking; if they break at all. I've had the best luck with RPM components all the way from the Xmaxx to my 10th scale cars. They all seem to hold up beautifully. I put them on all of the cars in my collection that break arms, when they are available from RPM, of course. AJ

[@PaulSantora]

@@barneyrebel0123 Never swap out the front and back control arms unless your just looking for an aesthetic bling look to your Talion Because if your bashing the shit out of your Talion all those vibrations from jumping and landing hard Will reverberate all over the metal Chassis until it finds a weak Point and it will snap causing alot of damage which means $$$$$$$$$ It's ok if you upgrade to aluminum To all the other parts suchs steering linkages steering knuckles spoiler supports etc. plastic is cheap and easy to repair so in the event you land hard from a jump the vibrations will transfer directly to the plastic control arms and break saving you a lot more money trust me I talk through experience and had to learn the hard way.😉

[@koz5592]

Love the detailed reviews thanks

[@AJJAMStudios]

Thanks for watching!

[@DeRock401]

Also the talion has belted tires so. No ballooning in the air can’t really steer it while it’s flying.

[@rcmakingtracks18]

Great video, love my talion, it's a very special rc... john

[@seth9145]

RCdude is that you? Haha nice jumps man! This car looks fun :)

[@AJJAMStudios]

Thank you for the comment. AJ

[@phillybrc]

Impeccable bash spot!

[@AJJAMStudios]

It has it's moments, but overall it is one of my favorites. Thanks for the comment. AJ

[@pewterngold]

Great review. Definitely the most detailed I’ve seen. I’d love to know what shock oil weight you went with. Also, Arma diffs drive me nuts with their factory oil weight they use. I’ve had some that were barely filled. What diff oils set up did you use for the front, rear and center?

[@AJJAMStudios]

It’s been a minute since I set that rig up but I believe the shocks still have the stock oil in them, as is our normal for the channel for an RC that controls well right out of the box. The diffs were all inspected and refilled. As I remember it was 30K front, 50K rear, and 100K center. It felt good with the tire weight and controls well for our driving style. Thanks for asking 👍

[@pewterngold]

@@AJJAMStudios thanks for your reply. Looking forward to more vids on your channel

[@joevozzo1]

Thanks so if I put talion tyres and 14tooth pinion will it drive similar to talion or the other option is 4s back flips I don't really jump cars Thanks for advice

[@gixxzilla7455]

Keep up the good work and energy. loving these videos 👍🏾

[@AJJAMStudios]

Thank you so much 🤗

[@norrisborden]

I just bought one today. Slowly replacing my TRAXXAS line up. A little disappointed that it didn’t come with a fan on the motor heat sink like the rest of my ARRMA vehicles.

[@clairecooper3848]

Enjoyed the vid AJ very informative 🤛 . Just subbed ya as I like the in-depth review pros and cons to go with the bashing . Good format 👍👌👍

[@AJJAMStudios]

Awesome, thank you!

[@B2Humla]

Nice test and review. Maybe Arrma is making all new cars EXB RTR. Some people expect new 4S EXB RTR also soon. Time will tell.

[@AJJAMStudios]

Thank you for the comment. Perhaps it will be so. AJ

[@ParcoUpchurch]

hank you for this. You ran all this on 4S at point the dog bones came out and afterwards? Thx for the reply Sir 👍🏽

[@BNIRc]

After looking over my exb on the front you could take a tiny bit off the end of the plastic arm where the ball end threads in essentially making the arms slightly shorter.

[@B2Humla]

Could maybe work.

[@harlyquin]

good camera angles and editing

[@AJJAMStudios]

Glad you think so!

[@pauliesplumbing]

Can you list the part number for the front shock pins and front RPM arms so I can replace them like you have done ? Thanks great content.

[@ericu9431]

I love mine, but blew the rear end in a couple of runs, and the damn motor gear won't stay on for anything grub screw keeps backing out even with red locktite. Aggravating cause I love driving it.

[@AJJAMStudios]

I understand. In my experience I have had to replace the pinion because the threads were too loose. The fit of the pinion and the set screw is very important. Perhaps the one you got with your model was out of tolerance. Just an idea for you. And one more thing, heat softens loctite so using more on bad threads usually does not help much. I hope you get this issue resolved. 😎👍

[@EyeDeal_666]

Hi, Great vid and really comprehensive review! Could you list the part numbers for the mods you made before you ran it, please? It makes a lot of sense to me!

[@AndrewGous101]

Any update on part numbers on Tallion EXB upgrade?

[@DeRock401]

Just got mine on launch day last week. I think I bent the chassis already but I love it.

[@brianbunner3669]

😎👍 ❤️❤️❤️❤️❤️ one of my favorite vehicles of all time is a cageless hypertruggy by hobao I did jump the shock oil up 10 in the front 10 in the rear so I believe was a 35 and a 45 and Proline Badland tires or what I'm running this thing is like Unstoppable on 6s I'm ready to sell a lot of my cars and just strictly just go back to this but my local hobby shop does not carry any of the parts sucks to be them 😮anytime you can review it I would appreciate it I think you would be pleased I see how you drive it will put a smile on your face

[@donaldbarron7916]

Awesome show 👏..

[@AJJAMStudios]

Thank you 😎👍

[@mora9426]

Really nice Vid.. No questions unanswered.. Since you have the Kraton and the Talion reviews are you reviewing the new Rtr Outcast Exb 6s?

[@AJJAMStudios]

Not at the moment. I do not have one, but I have driven them. However, to review them I have to own one, and I am not very enamored with the handling. So I probably won’t get one. I’m not saying it is a bad truck. I just don’t think it is for me. Maybe sometime in the future I might break down and get one. Thanks for asking. AJ

[@wrenchingrc174]

Good morning AJ. Am I missing something on the fit of the RPM wing mounts?

[@AJJAMStudios]

What issue are you having?

[@wrenchingrc174]

The wing mount does not clear the opening in the exb shock mount. The RPM wing mount is thicker than the stock wing mount. I have a Kraton V4 so it easily clears the cutout in that shock mount.

[@AJJAMStudios]

Insert them upside down and rotate them to get them into place. It is a tight fit but they do go through. It took a minute for us to figure it out too. Best of luck. AJ

[@AJJAMStudios]

If you need I can post a video showing the proper procedure. But try it first and let me know if you get them into place. If not, I'll do the video for you. AJ

[@wrenchingrc174]

Thanks AJ. I got it installed and it looks awesome. The bashing will begin real soon.

[@AndrewGous101]

Hi AJ, awesome vids!!! Which is better in your opinion: 1) Arrma Tallion BLX, or 2) Traxxas e-Revo 2.9

[@AJJAMStudios]

Nevver had an e-Revo. Love my Talions though. Thanks for asking.

[@sqby78]

I know this video is kind of old but which would you recommend out of the talion exb or kraton exb? I'd do a mix of being on a dirt track and hitting some jumps but I just don't know which to go with.

[@AJJAMStudios]

For a mix like that I would go with the Talion EXB. For straight out bashing and jumping the Kraton is really good. But out of the box the Talion is faster. Of course we lengthened our RTR and made it even more awesome. Just our opinion. Thanks for asking 😎👍

[@mikescallon4288]

Quick question, somewhat new to rc world and I own a Talion. What is the benefit of installing the shims?

[@AJJAMStudios]

Keeping the right gear mesh is paramount to not only performance but to longevity. The shims help set that spacing: if needed. You need to determine if they are needed. Thanks for asking.

[@i4nic256]

Insightful video. Does the 6S Kraton V5 have the same problem with the front end? I just ordered a V5 and I read it comes with EXB arms. Any problems with the Kraton V5 that you are aware of?

[@AJJAMStudios]

Built the same…my gut says yes, it will have this issue, but I wouldn’t address it until you have a problem. Easy fix. Bash hard my friend. 😎👍

[@i4nic256]

@@AJJAMStudios Thanks bud. Cheers

[@davidwebster4453]

Great video! Which Savox servo did you replace it with and also is there another top of the line servo you would use for this car? Have been out of the hobby for 15 years and your videos are helping me get back up to speed. Thanks

[@AJJAMStudios]

The one I chose was bigger than my rig was setup for, so I had to do some custom work to install it. My fault, just pick a high speed, waterproof servo sized for your rig and go for it. High power output would be good as well. Sorry I couldn’t give you a part number. 😎👍

[@maornavon2231]

Great video! Just not sure how the RPM arms, which are softer than the stock ones, prevent the shafts from popping out of the cups.

[@AJJAMStudios]

The footage speaks for itself on that point. The arms work. But as always the choice is yours. Have fun. 😎👍

[@SiRTHiZZL3]

@@AJJAMStudios I have a Fireteam with the same inherent problem from the KRATON exb arms. So this fix should work on the fireteam as well right AJ? And WHY do these arms work over v5 EXB? What measurement is different?

[@jgbeasley1]

Awesome video!! Have you made a tutorial on that jump you have? I would love to try to make something like that!

[@AJJAMStudios]

We’re working on that one. Should be out soon.

[@fiatfixie4344]

Very helpful video, thank you. One odd question, Would the Talion wheels work on the Kraton? or would the lower profile cause the chassis to slap too soon?

[@AJJAMStudios]

The fit just fine. The clearance is a bit lower, but not by much. In fact, I like to run them on my Kraton when I hit the track. Thanks for asking. 😎👍

[@howardsadofsky7694]

Great video AJ; learned a lot and subscribed. Are you happy with the stock 2000cst shock oil or did you go lighter such as 80? Thanks.

[@AJJAMStudios]

I do like the way the shocks are working, and thus, haven't had to adjust them as of yet. The Talion is, and always has been, a beast of a car. So underrated. Thanks for asking. AJ

[@howardsadofsky7694]

@@AJJAMStudios thanks for the reply. Got mine coming tomorrow. Have you heard of the battery tray fix for the Kraton using wing nuts? I had to do it on my v4 and EXB; do u think the Talion will need this?

[@brianbunner3669]

😎👍Let's test these..MY TESTES HANG LOW THEY WOBEL TO AND FRO is that a hidden joke I love it either way it doesn't matter everything you've done with that EXB TALION ❤️

[@adamgoodier5047]

Could you put a list of the parts you added onto it before you took it out please?

[@AJJAMStudios]

Sure. A wheelie bar from the outcast 6s. A rear bumper (which is a front bumper made by RPM) for rear protection. The front A arms made by RPM, to control the driveline issue. RPM rear wing mounts designed for the V4 Kraton. and that was about it. Everything else was stock. I hope this helps.

[@kimlundgren9306]

@@AJJAMStudios Which shock and pin did you use? Can you give a link? Thanks a lot. Great video!

[@flipster2321]

Where do you get your RC parts? I need the rear bumper and wheelie bar.

[@AJJAMStudios]

My local hobby stores mostly. But if they do not have a part I search EBay and Amazon. Thanks for asking. 😎😎

[@dentfreakzpdr8822]

Hey do you have the rpm part number for the rear bumper for the arrma talion 6s

[@AJJAMStudios]

It’s the RPM front bumper to the Kraton 6s mounted on the rear. 😎👍

[@jamiefox8670]

Nice video.. could you use the TLR tuned Typhon chassis and make it a tailon?

[@AJJAMStudios]

No. The Talion is longer than the Typhon. Thanks for asking. 😎👍

[@calvinpas3384]

What would you prefer kraton or talion i drive either in loose sand or on concrete and skateparks

[@AJJAMStudios]

That’s a tough one. Both are awesome and fast. Both have the same power. But the larger tires on the Kraton give it more control in the air. So I guess the Kraton would win out. 😎👍

[@calvinpas3384]

@@AJJAMStudios isnt it a good idea to give the talion some backflip tires from the outcast?

[@AJJAMStudios]

I did that, but didn't like it much. The backflips are too aggressive for my taste. Still, it does work. I find the Kraton stock tires to be a great addition to the car. Thanks for asking. AJ

[@calvinpas3384]

@@AJJAMStudios alright man so rven for flips and trick yoh suggest the stock kraton tires over backflip tires? I biught an talion 6s yesterday

[@bonezb21]

Got my talion 2 days ago and want to say I love it,but can not get it to go over 45mph. Even with the high pinion gear I'm not achieving more. I've recalibrate esc and bind like the manual says and still no joy. Tempted to just chuck the esc out as that's the issue I think 🤔

[@joevozzo1]

I have exb out cast I want to put 4s out cast tyres and 14 tooth pinion , mainly will run on ovals , I have fan on motor is this set up ok for what I'm doing with it and should I have punch on 3 as a minuin

[@AJJAMStudios]

If your Outcast is a 6s, then you should try the Talion tires for the oval. I think they will allow for more control and acceleration without trying to stand up every time you pull the trigger. And for the punch setting, if you can spin the wheels at a start then the punch is set plenty high enough. Remember, the higher the punch setting the shorter the runtime due to amp draw.

[@OnwardsOffroad]

Wonder if they will release this as a Talion EXB roller! I'm so close to pulling the the TailionEXB 6s but I know I'll tear it down quick and put my preferred electronics in!

[@AJJAMStudios]

Not that I'm aware of. At least, we haven't seen that option yet. Thanks for commenting. 😎👍

[@Aaron.13]

For the type of driving you were doing in this video, high speed dirt, corrugations, smaller jumps etc would you recommend the Mojave or Kraton 1/5 scale? And would you mind telling me why you would choose the one you did? Thanks and good job on your videos!

[@AJJAMStudios]

That would be a matter of what the driver is into. Each car has its charms. The Mojave is awesome for a desert racer, fast, awesome to watch run, and it’s tough as nails. The Kraton 6s EXB is cool too but in different ways. With some mild modding this thing is super durable. It is fast, jumps well, and is powerful. I would say the Kraton is a bit more versatile however. You mentioned 5th scale, again, it’s a different animal altogether. I bought the V2 RTR because we usually get the RTR before we get the EXB. As things stand right now, the 5th scale Kraton RTR is number one in our collection. But again, it is all a matter of choice for the driver. Performance, brute force, all around toughness, these all play a part. My favorite out of these three rigs has to be the Kraton 8s but it is a close thing. For me, any of them would make for an awesome day out bashing. I hope this helps 😎👍

[@michalopaleny9553]

Do you always vent all your tires?

[@AJJAMStudios]

Not all of them but I suppose I should. Usually I vent 1/8th scale and larger. If I get a rig into puddles or deep water I vent it. It is a good idea…in our opinion of course. Thanks for asking 😎👍

[@RC_Berserker]

I put the 4s backflip dboots on mine. They’re awesome. I have the front rpm arms and will put the wing mount next

[@AJJAMStudios]

Sounds good. 😎👍

[@Gogobs728ssskenda]

Can you make a video how you cleaned your cars? Your cars look great even after your brutal runs.

[@AJJAMStudios]

We have one. Check it out. kzbin.info/www/bejne/g3qmnnmLeLB5eKc

[@BNIRc]

Love my exb but I want one of those , and add a carbon fiber chassis 👍😆 should be epic

[@BNIRc]

Also that ExB Kraton front bumper saves a bunch

[@AJJAMStudios]

True that 😎👍

[@cndlpwr]

Looks like a great place to run your rigs but I think all that dust hanging in the air would drive me crazy!

[@AJJAMStudios]

It is a good spot. Most of the time the dust is minimal. Thanks for the comment.

[@Sherky59]

What are the part numbers??

[@AJJAMStudios]

For which parts?

[@nrd515]

I think this one falls through the cracks simply because of the looks of it. IMHO, it's one of the most unatractive cars out there right now. The body and wheels are the problem. A friend of mine has changed out the body on his to something else, I don't remember what it was, and swapped out the wheels as soon as he needed a new tire. Looks a lot better now.

[@AJJAMStudios]

That’s what we love about this hobby; diversity. AJ loves his Talions as do many of our friends, but we are aware that “Taste” is a thing. What works for some does not necessarily work for everyone. Great post. Thanks 👍

[@OnTheEDge2011]

top +

[@JohnSmith-lk8me]

Makes me nervous, i just ordered the 1/5 Kraton EXB.

[@AJJAMStudios]

Keep in mind the 1/5 scale is a different animal.

[@JohnSmith-lk8me]

@@AJJAMStudios hahaha that didn't help, from what i've gathered the castle 1100Kv Sensored Motor can be a difficult install.

[@trimmin420]

I just bought 2 typhon 6s v5 last week and both broke on the 2nd run both ESC's one the wires got stripped out and the other had a cap pack wire fray due to the servo arm pinching it and cutting it, I contacted Horizon Hobby and they told me to go pound sand!.............. I WILL NEVER BUY ANOTHER FUCKING HORIZON HOBBY PRODUCT EVER AGAIN!!! buyer beware

[@paulcockcroft8920]

gave up listening when you said guys for the tenth time in a minute

[@AJJAMStudios]

Well…thanks for stopping by. 😎👍