Monport GA100 MOPA Fiber Laser - 100W Of ULTIMATE Laser Power!

Рет қаралды 12,430

ArtByAdrock

Күн бұрын

Пікірлер: 32

@RyanMercer 6 күн бұрын

I've got myself on machines, but never gouged my eye. Oof!

@ArtByAdrock 4 ай бұрын

Hey everyone, sorry for the delay in videos as I damaged my eye which you’ll see in the video. If you’re looking for a super powerful laser though definitely look into this. It’s currently almost half off but I’m not sure how long the sale will last but if you use the code in the description it’ll save you an additional 10%. Enjoy and I’ll see you all in the next one! 👍🏻

@draco_2727 Ай бұрын

Dude, that's one dangerous accident and a good reminder for all of us to wear protection glasses around these machines. Is your eye better now? I hope you recover completely from that 🙏

@victoryblisstx 3 ай бұрын

@20:13 you should put these numbers overlay, best 100w spread i have seen to date, I amusing a 110mm lens w/ power at 28% and it was perfect... Many thanks

@BrasiliaLaser 4 ай бұрын

This is a very good video. I bought a 100w JPT Mopa. But there is no manual or instructions for the JPT. Nothing at all.

@Ritten_Lies 21 күн бұрын

If I had a piece that was 6 or 7" high would that be a problem for focusing that high off the table?

@bryanrussell2124 4 ай бұрын

Great review! Do you have any settings listed, or a file, for that Homer image? I have the Monport GI60, your review of it was one of the ones that convinced me to go ahead and get it. Also, where do you get your coin blanks? I know there is a lot on Amazon, but it seems like at least half of those turn out to be bad quality. Thanks!

@ArtByAdrock 4 ай бұрын

@@bryanrussell2124 if you email me I could send you the lightburn file I used for Homer and some of the colors. You will probably have to adjust the settings slightly for the 60w though. For the brass coin blanks, I usually just get them off Amazon too. The steel ones I think I got off Ali Express if I remember correctly. They aren’t that great though and I’m still looking for better quality ones.

@CutItOutWithUs 3 ай бұрын

Hello! Awesome content here! I too, would be interested in your color marking settings. I bought this laser last night using your coupon and am super excited! We have a 100 watt CO2 laser and a diode laser as well as a CNC, resin, and filament 3D printers so the fiber laser was the missing modality! There is a place called Limitless Solutions out of the UK for what look to be very high quality blanks. I ordered some last night based on a KZbin video of another creator who showed his haul from them. Free shipping when you spend $150 American or more. Their coins and tags look gorgeous.

@ArtByAdrock 3 ай бұрын

@@CutItOutWithUs send me an email and I’ll send you the lightburn file used

@jamesmor5305 17 күн бұрын

I am interested to. Where can I find the Emailadresse?

@gustavosalgado6846 4 ай бұрын

muchas gracias, muy buena información. Acabo de comprar una maquina mopa 100w y tengo muchas dudas de como usarla. Saludos!

@SeanRedux 4 ай бұрын

That is a cool machine! So sorry about your eye! Eeeeeee scary!

@Johnathanhoang2010 3 ай бұрын

Hi, I watched your youtube video about the Monport GA 100 and ended up getting the same one. Could you please send me the settings for the one that you get many colors on the stainless steel so I can use it for mine. Thank you.

@ArtByAdrock 3 ай бұрын

Send me an email

@Johnathanhoang2010 3 ай бұрын

I just sent you an email @@ArtByAdrock

@SYKOK1LLER 3 ай бұрын

I've been keeping an eye on this model but the 30 watt one. I always end up going for the better version so I don't feel I'm missing out on a feature, power, or speed and just buy once, cry once. Why did I watch this video? Off to see what other videos you made from this machine though.

@scotts9898 4 ай бұрын

$6k+ is a lot of money but I guess if you use it everyday it could be worth it. Great power for sure. My engraver/cutting laser is 70w and it's awesome but more power is always welcomed. Just couldn't ever justify spending that much it save me a little bit of time.

@armarmo964 Ай бұрын

Are the fans loud on this model?

@ArtByAdrock Ай бұрын

@@armarmo964 no they are not real loud

@Data77-g5n Ай бұрын

My Monport GA100 has a two pin door switch on the back. Has anyone used this with a door switch on their enclosure? Monport customer service said refer to the wiring diagram but I can not fine the diagram. Lightburn has a door port in the settings. I can't get LightBurn to see an open or close when I short the two pins. How does this work? Maybe it is not wired up inside.

@jhenderson0107 16 күн бұрын

According to Monport tech support "The two pins connected to the door protection are pin 1 and pin 12 on the motherboard. The door port is set to 0 and controlled by low level." Upon reviewing Section 2.1.4 of the LMCV4-FIBER-M-Fiber Datasheet.pdf, pin 12 is GND and pin 1 is XORG0. XORG0 is typically used as the extension axis home switch, but since the extension axis on the GA100 is the rotary, Monport has repurposed this signal as the door sensor. If you wire a switch to the back panel "Protective Cover" connector, In14 should report the state of the door sensor.

@Data77-g5n 16 күн бұрын

@@jhenderson0107 Thanks, This works great. I can see it toggles the red / green in LB on the far let row. As you said this is on Port 0. I now need to test to see if it stops the laser from out putting.

@jppalm3944 2 ай бұрын

No extra lens at that price?

@scubajeff2 Ай бұрын

Really great video. I was hoping someone with one of the machines could tell me how low the head will lower using the down button. Mine will go all the way to the top and will bump the top. But if you go down, it stops at 319 mm to the line on the side of the head. (This is not even halfway down the tower.) Could someone lower theirs and tell me the height at which theirs stops. I would think, if you are using a shorter focal length lens or doing something off the side, it should lower more. Thanks in advance.

@jhenderson0107 15 күн бұрын

The down button will not work if the auto-focus sensor is positioned over a highly reflective surface. Position something like a black business card blank under the auto-focus beam and the Down button and auto-focus will work normally. I encounted this phenomenon when the focus beam struck my Blackwell aluminum grid.