VERY SCARY Turbine Jet MAIDEN • HSDJETS T-45 K70G4+ RC PLANE • (English/Français 4K 60fps HDR)

Watch ALL the video to know all the clues !
🇺🇸 Hi folks 👋🏻🤠
Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot) 🙏🏻🥰
If you want to help me to expand my squadron 😜 or buy a specific plane to review, you can help me by making a small donation via my PayPal link www.paypal.me/arthurjanin?loc...
Thank you very much in advance my friends 🤩🙏🏻
🇫🇷 Salut les copains 👋🏻🤠
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) 🙏🏻🥰
Si vous voulez m’aider à agrandir mon escadron 😜 ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal www.paypal.me/arthurjanin?loc...
Merci beaucoup beaucoup d’avance les amis 🤩🙏🏻
📸 Follow me on Instagram : / arthuraerorc
⏰ TikTok : vm.tiktok.com/ZMNYCqUhC/
You can buy my things here ⬇️
💨 Kingtech Turbines ➡️ www.kingtechturbine.lu
🇺🇸 ⚓️ HSDJETS T-45 Turbine Ready ➡️ hsdjetsuk.com/product/t-45-go...
🎮 Jeti Rx and DS16 ➡️ www.opale-paramodels.com/fr/ ‪@OpaleParamodels‬
🔋CNHL LiPo ➡️ chinahobbyline.com/?ref=I5Ew9...
✈️ Jets and more ➡️ www.turbines-rc.com/fr/?aff=4
🇺🇸 ⚓️ HSDJETS T-45 Goshawk Turbine Foam Jet (PNP + Smoke, no turbine)
Wingspan 1502mm, length 1903mm, dry weight 7.7kg, flying weight 10,5kg (1800ml kero + 120ml UAT + 750ml smoke)
- Turbine : Kingtech 70G4+ ➡️ kingtechturbine.lu/KingTech-K...
- Very hard foam (20 times EPO)
- Control system included MFC-2085
- 2 LiPo CNHL 2S 2200mah XT60 (required)
- With slats and air brakes
❌ Book CG 150mm from slat root leading edge, straight along fuselage and aligned with first wing screw!
📏 Rates after the 2nd flight (For the elevator, measure from the leading edge of the tail, centered with fuselage marks) : low / mid / high
- Elevator : 20/20/20mm (you have to change servo arm linkage to outermost hole ⚠️)
- Ailerons : 15/18/23mm
- Rudder : 25/30/40mm
- Flaps : 20 / 35mm (5mm up elevator)
MFC-2085 inputs:
R11 : slats
R13 : smoke pump
R14 : airbrakes
⏰ Flights with timers and voltage
1st (filmed) : 4m40 turbine and 50% fuel left (pump factor was 600 but totally wrong so I set at 400 after maiden)
2nd (filmed) : 3m18 turbine and 70% fuel left (I finally set pump factor at 350)
0:00 Présentation française
0:28 English presentation
1:00 MFC/GSU start
1:55 K70 Start-up 🔥
3:01 Take-Off
3:28 Trimming / increase elevator throws
4:47 Half throttle to full throttle climb out
5:07 Roll
5:25 Close flyby
5:37 Full flaps
5:48 Go around
6:13 Airbrakes deployed / Landing (full up elevator)
6:45 First thoughts
7:28 Telemetry check
8:13 Please Subscribe 🙏🏻😍
8:39 Elevator servo arm 😳
9:12 Details photos
#turbine #rcplane #kingtech #jet #jeti #opale #radiocontrol #setup #modellbau #t45 #eflite #new #hsdjets #perfect #foam #crash #fms #freewing

[@rcturbinator7855]

Well done my friend 😊 and welcome to the OTHER SIDE 😁

[@ArthurRC]

Thanks my man 🙏🏻🙏🏻🙏🏻🤩 welcome to the dark siiiiiide 😈😈😈

[@jeffhenderson934]

You’re the best pilot on KZbin. You ain’t scared of nothin’.

[@ArthurRC]

Oh that’s so kind, a bit excessive but thank you so much buddy 🙏🏻😍

[@jeffhenderson934]

@@ArthurRC I agree with you on the sound. I’ll buy one. I may never fly it, just taxi it around. That’s how much I like the noise.

[@ArthurRC]

@@jeffhenderson934 haha yeah me too, I love taxiing that noisy jet 😍

[@alainkoenig8259]

bien joué Arthur, joli vol. TB pour la remise de gaz, cela doit être un non-évènement. Good job and Congrats.....pas mal pour un vosgien.....🤣🤣

[@ArthurRC]

Hahahaha fumiiiiieeeeer Va 🤣🤣🤣 mais merci quand même 😘

[@ficosk8]

Great Video as always! "L´elevator tá fait transpirer 'à la fin " coming in for landing xD wow..... full up :S I had some models that were trimmed so badly that I had something similar, also one time flying with Spektrums SAFE by mistake and trying to bring the nose up with full flaps... Luckily you could land safely! Cordialement, Francisco

[@ArthurRC]

Yes it was very scary…what a bad jet 😝 very bad built

[@vouauxphilippe3430]

impressionnant ! le bruit de la turbine !!! et alors toi , tu gères bien on ne remarque pas du tout le stress , ou alors tu ne stress pas tout simplement 👌👋

[@ArthurRC]

Haha j’ai un peu stressé si si mais j’ai plus eu peur à la toute première mise en route bizarrement ! Merci 🙏🏻😍

[@M4rkmcc21]

Ohh Arthur what have you done mate?! Now u got me looking at my first turbine! 😂

[@ArthurRC]

Haha it’s time bro it’s time 🥳🥳🥳 you will love it and it’s the same as a 120mm EDF jet…

[@bradleygardner3326BigAir]

I'm still holding my breath! Great job!😧

[@ArthurRC]

Haha so cool you felt that 🤩👍🏻 thanks bud

[@jettechdonatkins]

This was a great maiden flight with a very nice landing.I love the real turbines as I worked on real jet aircraft for 40 years.I hope to see you fly this again with the elevator in the correct position.Thank you Arthur and greetings from the USA.Go Yankees!

[@ArthurRC]

Thanks a lot buddy 🙏🏻🙏🏻🙏🏻 so glad you liked it! But the second flight was still with the same elevator issue and I HAD ANOTHER HUGE ISSUE…you’ll see 😁🙈

[@davidgerlach1132]

Just busting your nads. Great flying and it looks like you are having a ton of fun! 🙂

[@ArthurRC]

@David Gerlach haaaa 🤣 sorry didn’t see the irony 🙈🙈

[@ChristopheKourylo]

Bravo 🤜🤛

[@ArthurRC]

Haha merci Tof 🙏🏻🙏🏻

[@FreeFlightDigest]

Liked!

[@ArthurRC]

Thanks 🙏🏻

[@patou3375]

Bravo, avec le stress, il fallait du savoir faire pour le ramener en un seul morceau. Gerer la radio au niveau des débattements alors que le fauve gallope....... Une dinguerie !!!!

[@ArthurRC]

Oh merci beaucoup 🙏🏻🙏🏻 oui j’ai l’habitude de faire mes réglages pendant le vol 🤣🙈 gain de temps 😃😃

[@patou3375]

@@ArthurRC quand même, il trace sévère ton truc....avec une propension a ce jeter par terre en descente, trim insuffisant. Un oeil en l'air, un sur la radio et la molette de reglage en tenant la profondeur a cabrer, c'est du grand art !!!

[@KB_RC]

Heck yeah man! Congrats!

[@ArthurRC]

Hihaaaaaa thank you 🥰🥰🥰🥰🥳🥳🤩🤩

[@sendit_rc]

Ready and waiting to see this Flight😁

[@ArthurRC]

Yeaaaaah 😻😻😻🙏🏻🙏🏻🙏🏻

[@ericbento1813]

Un nouveau cap est franchi ! Félicitations 👍

[@ArthurRC]

Ça y est je suis un homme 🤣🤣🤣🤣🙈 merci beaucoup Éric 🙏🏻🙏🏻🙏🏻

[@ericbento1813]

Il faut le faire... je sais que j'en mènerai pas large !! Bonne soirée...

[@ArthurRC]

@@ericbento1813 et bien ça va encore figure toi que je m’attendais à pire, le plus effrayant a été la première mise en route bizarrement et le deuxième vol et tu comprendras pourquoi quand je publierai la vidéo 🤣

[@gilleslatulipe2913]

Merci pour ce petit moment d'émotion où l'on note bien pour le pilote la transition avec un Viper Eflite ! Un Shoot d'adrénaline !! Gilles

[@ArthurRC]

Merci beaucoup pour ton commentaire Gilles ! Oui c’est un moment incroyable que le premier d’un jet kero 🤩🥳

[@T22WARRIOR]

Well done pour un maiden en turbine 👍

[@ArthurRC]

Merci beaucoup 🙏🏻 c’est dommage que le servo de prof n’était pas optimal sinon ça aurait été parfait 😔

[@T22WARRIOR]

@@ArthurRC je n'ai jamais fait de maiden parfait depuis que je vole en jet à réacteur 😉. Mais c'est sur qu'il faut encore plus vérifier et re-verifier les gouvernes et autres car tu as vu, ça pousse un peu quand même 😉

[@ArthurRC]

@@T22WARRIOR bah là j’avais les débattements du livre hein donc j’étais confiant mais en fait c’est trop peu…😏 mais oui je vais tout tout checker maintenant

[@janmb]

1. Congrats! 2. Fire extinguisher in your hand, ready for use, during every single start. No exceptions. If you get a hot start, you do not have a single second to spare.

[@ArthurRC]

1. Thanks 😏 2. I had it just behind me but not in my hand…maybe I trust Kingtech too much….??? 🤩🥰

[@Ossy8618]

Very nice maiden👍🏼 awesome bird!😉

[@ArthurRC]

Thanks a lot bud’ 🙏🏻😍

[@pichurrc]

HI Arthur!! And it is!!! Here is the first flight of the turbine! Woh woh!, how crazy hehe, it's fast very fast hehe, and what a special sound! Congratulations on those first flights!

[@ArthurRC]

Thanks my friend 🙏🏻 it was something special yeah 😍

[@M4rkmcc21]

Just gave the video a full watch mate. That's a gorgeous jet 🔥 Your production quality is top quality and one of the best for rc plane reviews. So thorough and I always appreciate the details in the description. U deserve alot more subs mate 👍🏾

[@ArthurRC]

Oh that’s super kind mate thank you so much 🙏🏻🙏🏻🙏🏻 if you want you can share my link to all your Facebook friends ♥️ kzbin.info

[@pascoul1963]

merci pour petit moment très sympa

[@ArthurRC]

Merci beaucoup 🙏🏻🥰 avec plaisir ! Je suis là pour divertir 🤣

[@tosspz1202]

Bravo Arthur. J'étais stressé pour toi. Merci de partager ces moments avec nous.

[@ArthurRC]

Oh merci beaucoup Steph 🙏🏻🙏🏻🙏🏻🤩 c’est avec plaisir ! Content que ça te plaise

[@stephaneduke9736]

Hello ARTHUR !!! DINGUERIE .. BRUIT D'ENFER et tout et tout ...!!!! ... Ps je suis étonné que tu n'es pas vu la position de la biellette sur la corne ... 🙃.... Stéph ....

[@ArthurRC]

Haha oui c’est du délire 🥳🥰 !!! Je me suis pas du tout inquiété vu que j’avais les débattements du livre et que c’est souvent trop pour moi…mais c’est une construction MyHobby et pas purement HSDJETS

[@stephaneduke9736]

@@ArthurRC Ok !! je comprend ..Bon le mieux c qu'il n'est rien arrivé OUF ... car cela aurait pu être un problème en vol .... Sinon je te félicite c'était vraiment beau .... Ah oui une chose je sais pas ce que tu en penses mais je le trouve nerveux en roulis tu en pense quoi ??? c juste mon avis perso hein .

[@ArthurRC]

@@stephaneduke9736 merci beaucoup Steph 🙏🏻🙏🏻🙏🏻🤩 je me suis vraiment battu avec cette profondeur de crotte et du coup j’ai mis les grands débattements et donc aussi pour les ailerons d’où cette hyper sensibilité 😁👍🏻

[@stephaneduke9736]

@@ArthurRC OUI oui oui !!! je comprend mieux maintenant ... ok ok... Ps c quand ton second vol ?

[@ArthurRC]

Je n’ai pas encore monté la vidéo et j’ai d’autre vidéo à publier avant 😕

[@benoitpotrel1911]

Super pour un premier vol, j'ai eu un peut peur sur ton atterrissage mais tu as bien géré comme d'habitude... Merci Arthur c'est toujours un plaisir de regarder tes vidéos.👍

[@ArthurRC]

Merci beaucoup Benoit, j’ai eu peur aussi hein ça fait drôle d’être complètement plein cabré et que l’avion ne change pas d’attitude 😳

[@jeanlucvassort6411]

Bravo !!! fallait gérer ... et bravo au cameraman

[@ArthurRC]

Haha merci beaucoup ☺️🙏🏻🙏🏻🙏🏻 c’était pas facile à filmer en effet, je ne maîtrisais pas toutes les trajectoires avec ces débattements ridicules 😔

[@minuteman4394]

Welcome to the world of jets buddy, great flight

[@ArthurRC]

Thank you so much 😊🙏🏻🙏🏻🙏🏻

[@ironmover5800]

Sound s awesome, you did a great job ! Look forward to more vids of this plane …..I watched it twice !

[@ArthurRC]

Oh twice??? That’s so so kind thanks a lot my friend 🙏🏻🙏🏻🙏🏻🙏🏻

[@guisblacio]

Arthur, great piloting skills. Congrats on your maiden. 🎉 Thanks for sharing, greetings from 🇨🇦 Keep them coming.

[@ArthurRC]

Thanks a lot buddy 😇😍🙏🏻🙏🏻🙏🏻

[@MrDo0bie]

Dope

[@ArthurRC]

🤣🤙🏻🤙🏻🤙🏻

[@TwoBrosRC]

Looking good m8! Making us want our own over here. ❤️✈️

[@ArthurRC]

Yeaaaaah you’ll get to turbine for sure 🥳😍 and thanks for your comment 🙏🏻🙏🏻

[@Allan_aka_RocKITEman]

I used to fly control-line model airplanes {with _'glow'_ engines} back in the 1970s. The closest thing to a jet back then was the _"DYNA-JET"_ pulsejet. Now there are _actual guest turbines_ that run at 50K+ RPM. CRAZY...😊

[@ArthurRC]

Yeah that was a crazy era 🥳🤩🥰

[@Allan_aka_RocKITEman]

@@ArthurRC >>> *_"Seems a thousand centuries ago."_* *-- APOCALYPSE NOW [1979]* {FWIW: I often use movie and television quotes to express things BETTER than I can put into words. Sometimes, I cannot even find my own words at all.}

[@Allan_aka_RocKITEman]

@@ArthurRC >>> I have never personally seen a *DYNA-JET* flown {either control line or RC}, although I have seen videos online. I also saw them occasionally in hobby shops, but as a teenager I did not have nearly enough $$$ to ever purchase one. I was in a small control line/free flight model airplane club back in the '70s. Some of the other members -- adults at that time -- had seen _and heard_ control line *DYNA-JETs* flown. They ALL commented on *HOW AMAZINGLY LOUD* those things were...😊

[@McDaniels777]

Congratulations on the maidenflight! Great job dealing with the elevator problem 💪👍...when you get comfortable, can you please highlight the difference in flying compared to edf jets? Thank you 😎

[@ArthurRC]

Honestly not a lot…the K70 is very very reactive and fast to go high RPM so the delay is not that different with EDF! The main difference is that it can flame out whereas an EDF is more reliable…! And the turbine is super super fast and powerful compared to EDF…and you have the smell and sound…😍😍😍

[@M4rkmcc21]

​@ArthurRC what can cause a flame out?

[@nirlachman007]

Man this one is crazy! Great handling buddy 💪🏻

[@ArthurRC]

Thanks a lot my friend 🥰🙏🏻🙏🏻

[@Airguardian]

Congrats on your first kero-jet maiden!!! That landing with reduced throws was truly scary but you managed it expertly. ^^ There you have another reason why I strongly dislike operating with limited throws... it can be just as dangerous (and more) as having too much! :o

[@ArthurRC]

Thanks bro ! But it was the book’s rates and we’ll know that the book’s rates are always crazy (but not this time 😂)…it wasn’t supposed to be that ineffective 😏 that wasn’t me for once…

[@Airguardian]

@@ArthurRC I'm mind boggled manufacturer's can't actually employ people capable of giving sensible setup recommendations in this day and age...

[@ArthurRC]

@@Airguardian yes that’s crazy 🙈🙈🙈

[@victormontalbano4993]

I got my battery’s mounted on the wood tray. To make CG Flys great. Dozens of good flights. I I did change out elev servo to a stronger one of better Quality. And never use leading edge slats. Unless your runway is moving 30 knots. !

[@ArthurRC]

What is your CG ? I succeed to move mine aft at 170mm instead of 150mm book’s CG, with adding 160gr lead in elevator servo bay ! I’ll try to test it as soon as weather permits

[@davidgerlach1132]

It'd be nice if your take off was more stable & "scale like" than not. Just saying, Mr. Pepé Le Pew! 🙂

[@ArthurRC]

…..it was my very first flight with a turbine and the CG was aweful and the rates also so I did my best! Thanks for your understanding 😏

[@Hunterboy01]

You smashed it buddy. Huge congratulations. I’ve just placed an order for another turbine to celebrate your maiden. 😂

[@ArthurRC]

Hahahahah thanks my man !!!! Haha so it’ll my fault if you bought another turbine, right ? 🤣🤣🤣

[@Hunterboy01]

@@ArthurRC 😂😂 That’s what I’ve told the wife. 😂😂

[@ArthurRC]

@@Hunterboy01 haha no problem 😅🤪

[@filou8169]

Très sympa vos vidéos. Ou volez vous pour avoir des pistes aussi grandes?

[@ArthurRC]

Merci beaucoup cette piste est à Saint Clément dans le 54

[@filou8169]

@@ArthurRC merci beaucoup et encore merci pour vos vidéos elles sont riches d enseignements.

[@ArthurRC]

@@filou8169 je suis ravi que ça te plaise 🙏🏻🙏🏻🥰🥰 n’hésite pas à partager ma chaîne autour de toi 😇🙏🏻 kzbin.info

[@r00kiepilot]

Very nice flying Arthur! Well saved that must be scary to not have enough elevator. I have been watching this model too since they released it. If I can get an airframe for a good price I would like to build it as an EDF very light on 6s perhaps with a Midi Evo 100 or Jetfan 110. Inspired by Wojtek's 6s BH Viper XL

[@ArthurRC]

Thank you so much for your kind words mate !!! Oh the frame is very heavy for the 6S, for a 12S yes 👍🏻

[@tomheetderks9997]

Well aside from the scary elevator, that went really well! Turbine jets are the pinnacle of the hobby IMO, so fun to watch, but I'll probably never own one. I get nervous with an EDF maiden flights -:)

[@ArthurRC]

I was like you 2 years ago…so never say never bud’ 🤓🤣

[@tomheetderks9997]

@@ArthurRC LOL! I like it, it means maybe there is hope -:)

[@Hunterboy01]

@@tomheetderks9997 just do it brother. I promise you’ll never regret it. 😎

[@ArthurRC]

@@tomheetderks9997 of course!!! We can all (almost 🤣) do turbine jet flights 😍🤩

[@tomheetderks9997]

we might be getting a really nice new flying field in our town with longer runway, so that would help make it possible some day! With the current 280' runway, I just don't think it's happening.

[@Ruffpuppys]

Does this need a gyro?

[@ArthurRC]

Not at all buddy but it’s just more beautiful when the attitude of the plane is straight without wiggles…when the wind blows strong or with turbulences it’s where the gyro is useful

[@paulrkytek6587]

You were lucky with that one !!! Well done for getting that back intact. So what happened when you did the initial elevator movement setup rates ? were they not 20mm as per book Did the factory set up the servo arm wrong? The manual I found on line is pretty sparse and I could not see any servo arm setup drawings.

[@ArthurRC]

Yes they put the linkage in wrong arm (inner most….) so now I have 20mm throws but I didn’t try yet

[@paulrkytek6587]

@@ArthurRC Enjoy your next flight. I have learned to go on the assumption that manufacturers have good days and bad days so I check everything. You would think that on a model that is often chosen as a first scale jet they would have a more comprehensive manual and check list

[@ArthurRC]

@@paulrkytek6587 Yes that’s really not enough I do agree 😏