DOES YOUR PROPERTY NEED AN ELECTRICAL REWIRE? - THE MAIN SIGNS TO LOOK FOR!

[@artisanelectrics]

Do you think your property could need rewiring?

[@annakissed3226]

Yes, very likely and because of the nature of your work & that you are KZbin Creators I was planning on asking you for a quote. Or do you only work for people who lose the boat race? 😭😭😭

[@moonshinepz]

Its on the cards 10 or 20 years down the line, but at our age that'll be someone else's problem. As it's a late 70s build and nobody has "messed" with the basic wiring since it was put in I'm pretty confident in the lifetime of the materials. I would have my garage rewired, though.

[@bjbest]

Definitely after watching this! Also I’ve just noticed that I only have one socket per room and after removing covers they are single back boxes with a single to double socket. Also in the joists there is a lot of twisted metal cable soldered together, assuming that’s the earth. Council house from mid to late 60s.

[@marklola12]

our house was built in 79 and the wiring in the wall sockets is the same as in this video...we have new switches though and light fixtures, also the grey coloured stufff over the wires and earthed. can i ask can you tell by some pictures if our main electric switch board etc is ok, outside beside the front door we have a tall cupboard inside is a newer electric smart meter (its looped as it has 2 thick pipes at the bottom) and new gas meter. the elctric one is linked inside to our original metal faceplate which is a metal drop down flap behind this are a row of black switches which turns part of the house off. does this sound all ok, i presume they would have fitted a new consumer switch unit at the time we had the smart meter fitted if we needed one?

[@seanflah408]

My house will burn down before it gets rewired for sure...

[@paulsymeou7619]

Asking an electrician if your house needs re-wiring is like asking a barber if you need a hair cut 😂

[@scoobysean555]

🤑

[@simonwass6315]

I was going to say it's like going to KwikFit and saying do my shockers, brakes and exhaust look ok?

[@kevinfield5372]

I would agree with this statement. I have an electrical qualification. I only got one sensible answer from 3 different electricians. The killer on the ring ccts. Is junction boxes. As older 1960's houses never had enough sockets. So they were often spurred of the ring with a junction box.

[@markpotter8280]

As an electrician I would disagree with this comment from my own personal experience. Due to the amount of work we all have as there is a huge shortage of qualified sparks. If I can get away with doing a test and it passes then great, but if I think it needs a rewire I will tell you, honesty is always the best policy and as an electrician we are obligated to be as honest as possible. Remember there is no such thing as a good electrician you are either an electrician or a bad electrician. Weird statement I know but if your a qualified spark and you take pride in what you do then you are an electrician

[@dw4525]

Hope you have smoke alarms 🔥

[@seanyd5698]

I was wondering if my house needed a rewire, i was just about to get a qualified electrician to come check it but luckily i found all the experts in the comments section. So now im happily just chilling in my house surrounded by 60 yr old wiring running on 2 curcuits and one breaker switch. Thanks guys you've saved me a fortune 👍🏻

[@michael5089]

😂

[@moonshinepz]

We had an inspection when we bought our 1979-built house. It was mentioned by the electrician that some 1970s/80s installations were done better than some new builds of today.

[@havaden96]

I once nearly felt bad tearing out an old and really well made consumer unit, that had stood untouched for the past 70 years. It was utterly prestine and an absolute work of art with every wire parralell and without a single kink. The unit looked like a modern pcb. But that doesn't help at all when its all crusty and falling apart as you touch it, and the diffuse code it followed back then was a nicely written note of "Don't accedently kill people"

[@kevxsi16v]

100000000% agree as a 25 year experienced electrician

[@TheOfficialBatteryMan]

Did it come with RCD protection on each circuit?

[@PeterEdin]

New builds are done as cheaply and as quickly as possible for profit.

[@BrittleScarMusic]

Just got a place myself from 1975, electrician said the same, needs a new consumer unit since there are a few problems with the current one but doesn't need a total rewire.

[@ThePa1ch]

Your explanation is ok as long as you explain to the customer that there's no safety issue, but if they want sockets moved they could do it now whilst empty. If the client was happy with the layout then you have no grounds to suggest any need to do it, unless there turned out to be IR issues.

[@inokinugent57]

Facts

[@jonathanbuzzard1376]

Depends. Let say you have purchased a house that you intend to live in for a long time, and the wiring is from the 1970's. Doing a rewire now while it is empty before you move even though it strictly doesn't need one may well be the sensible/pragmatic option, over getting one done in 15 years time when it is a massive upheaval.

[@jonathaneastwood2927]

@@jonathanbuzzard1376 PVC wiring lasts forever no need

[@jonathanbuzzard1376]

@@jonathaneastwood2927 except PVC wiring does not last forever often over ti e the plasticiser leaks out, it goes brittle you name it. Sure it lasts longer than rubber coated fire but forever it does not.. Further what was considered adequate 50 years ago in terms of sockets etc. is not sufficient today and you get to a point where you might as well just rewire.

[@seantaylor9758]

Those 60's and 70's MK sockets were good products and will outlast all of this 'made in china' stuff you get now. The wiring / cabling that always bothers me is the fabric and lead sheathed where the insulation rots inside the lead all ready for a shock! if you grab hold of a live one! Whilstsafety has improved over the years I still feel that some of these old instalations were fitted well and the test of time proves that.

[@essdee9143]

Very well said buddy 👍🏼

[@Waynesworldofgaming]

I completely agree with you

[@timhall4355]

Mk 25 year guarantee was in fact many more years

[@Waynesworldofgaming]

@@timhall4355 they don’t make them like that anymore

[@mrsecurity]

@@timhall4355 I have some that where fitted in 1962 and still worked fine up until the house was re wired a few months ago

[@p3147-u9d]

Manufacturers recommended life span of PVC cable is 25 years. But in reality modern cable (and that from the 80s) if it’s not exposed to UV can last 40 - 70 years without issue. Environmentally there was a discussion a few years ago as the cable was being thrown away but did not decompose very well or all. If it’s unsafe then I get it, but there’s no need to replace it just for the sake of it.

[@paulgriffin5237]

My electrician sayed about my 1973 house when upgrading the system, is that the cables will out live us all and do not need changing,

[@TheBroz]

I can’t say I agree that an old fuse box means it needs a rewire. Just that it needs a new consumer unit. Our house had a crusty old box, and mostly red/black wire. We had the house tested no issues of note, so we just got a new modern consumer unit fitted.

[@kevxsi16v]

Generally most older installations were wired really really well even back to the 1960s and late 50s when PVC cable first came out. They can be absolutely fine, generally The lash ups are the extra sockets extra lights extra points changes done by the homeowner or the ex-BT guy down the road. I would never rewire a property just because it’s red and black.

[@Mccheed]

Those light switches were known as MK Ivory range. My flat in an old Victorian house was rewired in the 1970’s and had them too. Mainly rewired now.

[@sh4dowchas3r]

having watched a few electricians open up a consumer unit to look in to see what's what, that's the tidiest on arrival consumer unit I remember seeing, normally they are much more like the "rewired by a chimp" vid.

[@daves8003]

Some info to help others to date their electrics. Green sleeving - pre 1977 Imperial sized t/e - changed early 1970s PVC t/e with 1mm CPC, 1970 to 1980 No CPC in cable - pre 1966 No MPBCs - pre 1966 Twin core PVC no CPC - 1960s and back Imperial sized conduit - early 1970s BS3036 fuses - ceramic 1970s-1980s (seen some in early 1990s though?) BS3036 fuses - porcelain - 1960 earlier White switch wires - 1960s VIR cable - twin core - early 1960s and earlier, singles with rubber cloth cover - 1950s-1960s Double pole fusing - ended 1955 Lead covered, rubber insulated -1940s and earlier No sockets in entire first floor 1930s Brown round light switches - mid 1950s Round pin sockets 1950s or earlier Wooden pattresses etc - 1960 or earlier

[@xxwookey]

Very useful. You didn't mention 'wiring in cavity' which my 1962 house had. Not sure when that became 'not allowed' - presumably sometime later in the 60s? (I also had no CPC in the lighting circuits _and_ metal wall lamp fittings in the front room, which even I think is a bit dodgy!) Also, is tinned+stranded wire an age clue? They presumably stopped tinning it at some point as it's been bare copper for ages. But perhaps that is a product choice and thus not an accurate ageing method?

[@annakissed3226]

Is there anyway of telling that your still running nineteenth & eighteenth century wiring??

[@stephenmason8566]

@@xxwookey Seem to recall being told at college that copper was tinned in rubber insulated cables to stop the sulphur in the rubber attacking the copper. Could be wrong, 40+ years ago 🙂

[@stephenmason8566]

Very interesting, thanks. Any idea when 3ph red white blue became red yellow blue? I've seen red white blue in old DB's, but not for a long long time. (I started my apprenticeship in 1977)

[@iadair6780]

@@stephenmason8566 And why was white changed to yellow, anyway?

[@joe2395]

yes agree in your case with a empty property that's going to be gutted,in another scenario where a property is lived in and nicely decorated and has the same aged wiring as long as it tests up ok,then by all means fit a new board if needed and any remedial work,not forgetting when installed it was covered by the regs at that time .

[@petehiggins33]

Something to look out for in 70's housing is wall lights, the type where the bulb is contained in a shade along with the wiring coming out of the wall. The high temperature cooks the PVC and turns it brittle. If you're really lucky you can find two bare copper wires coming out of the wall and going into a connector block where all the insulation has fallen off.

[@annakissed3226]

Ooh thanks for this!! We live in just such a seventies house!

[@JohnKing-lw2sb]

A rewire is fine if you are fully renovating anyway so having walls skimmed, carpets replaced etc but if not, it’s a fair upheaval to do if you are living there. The mess from chasing in plaster walls, pulling floorboards. It’s really something to be done while the owners are not living in the property. Often people buy somewhere and move in on completion day, having to rip up floorboards and chase into plaster walls while they are trying to live there is going to be difficult.

[@matsuz100]

4:06 If they change the facia they changed the wiring, it is very easy to change sockets & light switches. But a pain in the ass to change all the wiring. Modern PVC cables can last up to 70 years, provided that they were installed well and have not been altered and abused over the years. In general though the average life expectancy of house wiring is somewhere between 25 and 40 years. Good video thank you.

[@shamilmccarthy]

They won’t be your friends after you give them the price 🤣 love you jord love the channel

[@rajveersamra7101]

Extremely useful video. Just purchased a house and was struggling to decide whether to rewire or not. Thank you

[@michael5089]

Superb video. Very well presented. I need to check my house which I believe was rewired in the 80s. Or possibly the 90s. It was my parents house. I have paperwork somewhere.❤😊

[@paultipton743]

A pub i frequent in the main bar and lounge areas has the same type 1970-80s mk sockets with rounded surface boxes and surface pvc cable with the metal buckle clips The light switches are a mixture of the brown round dolly switches and the white plate switch like in your video. The pubs been owned by the same family for a few generations It's like stepping back in time.

[@davidrogers1511]

It is not a requirement to rewire a property when there’s green sludge.

[@skfalpink123]

I loved those original MK cooker outlet switches - they not only looked stylish, they sat almost flush with the wall and were really easy to clean.

[@peterking2794]

I loved them too. I wanted to fit one in our first house back in the 70s, The house was built in the 30s and I spent hours chiselling what turned out to be engineering brick to install it! I certainly didn't want one of those newer ones that were the same size as a twin gang socket. We now live in France where there is no requirement for a local isolator switch.

[@paulgriffin5237]

@@peterking2794 ilike the old mk black plug goood rustic look

[@nphil93992]

It was always on the list as i have an old rewireable fuseboard from the orginal late 60's install. We have no where near enough sockets in the rooms and only 6 circuits for the entire house. Having seen this and various other videos its being done once we get the garage ceiling tested for Asbestos

[@stevenribet]

Excellent clear and concise production

[@smiffysmiffy123]

That property doesn't need rewiring unless it has IR issues, however like you say if it's being majorly altered I'd also recommend.

[@JasperJanssen]

If it’s empty now and they’re planning to stay there for decades, the time to do it is definitely now. If they’re definitely planning to move on to a different house in a couple of years, it will still work as is for that period - unless major alterations are required anyway. I know from experience that the very very last thing you want is to do a rewire while you are living somewhere.

[@rouman7]

To be honest some of the work done in the 70/80s is better than some of the work I see today ..but your right about the rewire , house is empty , decorating to be done , best get wiring and plumbing checked also …before you add your personal touch to it .. plus another point a new kitchen? Would need more sockets etc …

[@JasperJanssen]

It’s not as important in a bungalow, but in normal row houses, being able to do all the infrastructure (be it electric, gas, water, hot water, central heating, or what have you) at once, while there is nothing glued over the floorboards, is *absolutely* an opportunity you should grab with both hands.

[@xxwookey]

It's a good time to dump the gas too if it's got it. And indeed do a general retrofit to at least AECB standard. At the very least deal with the floors whilst it's empty as they are to painful (suspended) or messy (concrete) to do later.

[@NigelB-cz9bz]

What about the combi boiler in close proximity to the fuse board and all in a small cupboard. Thermal issues?

[@boblordylordyhowie]

There was one good thing about the large cooker units, you had space to work, now, it seems it is all about space saving, which would preclude me now from being a sparky as I have big fingers. Although I got out of house electrics early on because I developed claustrophobia working under very low floors, like, had to back out to turn my head, low. I didn't like it when they changed the colours as they are nondescript. Now with LED technology it isn't a problem but when they first came out we didn't have LED torches and on some inspections you couldn't tell the phases apart, as in low light they all looked the same. That and cost was the reason SSE told them where to go as far as the Grid was concerned.

[@alunstone]

There was probably an old rewireable board in there originally and it has been upgraded with the Hager dual RCD unit. Most of the installation is probably original as you said. Those sockets at 4.34 were made late 60s early 70s and there are still a lot of them around. They may be old but Mk were fantastic quality .Still good now but not like they were .Interesting video thanks for uploading it.

[@xxwookey]

Yeah I've still got one of those sockets and a couple of the light switches left. Still working and testing fine.

[@alunstone]

@@xxwookey They were built to last definitely.

[@helenhelen5131]

This has been SO helpful for me for my recent purchase of a 1950s bungalow 👍🏼👍🏼👍🏼

[@artisanelectrics]

Glad it helped!

[@affy675]

Dont be fooled by the cooker switch you can still buy them brand new from wholesalers!! i fitted one a few months back to replace one with no shutters

[@patburke5740]

The house i grew up in had that exact cooker switch in the kitchen with the socket as part of it, the house was built in 1975, there was only one other socket in the kitchen, a single. Its mad to think there was only 2 sockets in the whole kitchen, times were so different.

[@kiltyk1148]

Bit misleading ...firstly the old MK range had lifetime guarantees unlike most if the cheap junk fitted today. Just because its original red black does not mean it needs replaced..that's what a megger determines on a test. If you truly want to know if the house needs rewired you pay for a full inspection. This is NOT a requirement on a vendor under current law. Its up to the buyer to get this done. As for skts at height..that will depend on what purpose the property was wired. I personally have wired countless homes for housing Associations and councils to confirm with disabled access. Lowered switches raised sockets. It's not a reason for a rewire. The only reasons for rewire are safety or circuit integrity..defo not aesthetics.

[@RahmatUllah-zp7ft]

Excellent work and professionally trained,,,🤠

[@musicallyyoshimi9651]

The old wiring colours were still available into the start of the 2000s. There were also quite a few years where they overlapped and you could get either. In D.I.Y places the old coloured stuff was cheaper (obviously wanting to clear stocks) so guess what people tended to choose! It was flex wiring that changed pretty quickly in the 1970s (I used to be a TV service engineer in that time - before moving into industrial electronics).

[@nua1234]

When I bought my house, I found light connected with bell wire into the back of a socket. The electrician said that was the least of the issues he found when retiring it.

[@asamitchell7948]

I work for the council and the spec for bungalows is 1000mm off the floor for all switches and sockets

[@annakissed3226]

Ooh thank you, is there any good ways of hiding or disguising sockets??

[@mcdon2401]

When my loval council contractors rewired my house, it supposedly passed the inspection. Strange how my boiler installer a few years later discovered that the main earth cable wasn't connected to anything 🤔 did explain the random electrical shocks though.

[@halesworth01]

We live in a 1970s house rented from a housing association, I went to change a socket front, and noticed we had 'PVC cancer' (Green Goo) I immediately put the socket face plate back on, and called our landlord to send a sparky, to whom I told about it when he turned up, he then condemned the whole house wiring (except for the kitchen, which had been rewired when the Air source water and central heating was installed about 2 years previous) So then the rest of the house was rewired. We got 3 extra twin sockets in each room of the house, as the original 1970s only had 1 or 2 singles in each room, and we had every sparky's worst nightmare....extension trailing leads EVERYWHERE!

[@liquidsnake6879]

"If they changed the cover (of the switch) they would've changed the wiring" you must be getting some seriously clean jobs lol who the hell replaces wiring to change out a switch? Unless the wiring burned out or something nobody would change it, the client would probably accuse you of trying to scam them for more money if they caught you doing that lol

[@jonp6798]

I was thinking surely he’s worded that wrong and means if the switch hasn’t been changed you know the wiring hasn’t been changed but if it’s a new switch then they may have changed wiring as you wouldn’t leave the old switch in. I’ve done 4 house renovations, in none of them has I changed the wiring when changing the switch haha.

[@cjmillsnun]

Yeah he got that the wrong way round. What he should've said, was if they haven't upgraded the switch, they wouldn't have changed the wiring.

[@Ragnar8504]

@@tobysherring1369 I've rewired rooms and put the retro switches back myself, even the 70s ceiling light. The room looked exactly the same as before when I was done, at least once the chases were painted over. Just minus the VIR singles in the walls (back in the 20s and early they didn't necessarily bother using conduit in Austria). Edit: I did replace most of the sockets because the old ones were well past their prime, the contacts completely worn out and bent out of shape. Some were Siemens and perfectly fine.

[@tobysherring1369]

@@Ragnar8504 the contacts in the old MK 13A outlets are very strong and reliable and everything seems much more solid - more and thicker brass, switch action is solid and probably copes way above 13A.

[@davelikesthings]

If they've not changed the fascias then there's a high chance the wiring has also not been changed either, as the switches would usually have been replaced at the same time. None of this is prescriptive, these are indicators. Being clever with semantics doesn't help get the message across. People giving all the other possible 'scenarios' really aren't contributing as much as they think they are.

[@johnlawrence9066]

Unless the customer is fitting downlights in the bedroom , I would still recommend keeping pendant lights in their near window position for modesty . The socket height from the floor must surely be dictated on whether the customer is able bodied in has an impairment . Same consideration also must apply to switch plates and other signal or control outlets . Love the posts . Keep up the good work .

[@JasperJanssen]

It seems like a bad idea to let the current resident’s current ability status be the determining factor for things like that. Much better to make it all accessible, because a) visitors exist b) the current resident won’t be the resident for the life of the electrical installation c) the current resident’s ability status will change over time as well.

[@annakissed3226]

@@JasperJanssen very good points. Is there any useful ways of hiding sockets behind panels etc?

[@steampunkskunk3638]

Interesting theory about green goo. I have seen it here in Australia and the industry has many theories about it. Some claim its moisture breaking down the copper, others that its rodent inhibitor that was present in the cables leaching out, some claim its the result of electrolysis caused by a poor earthing system. Your theory of insulation reacting with the copper is a new one.

[@annakissed3226]

The green from the oxidation of the copper makes sense & that it must come from the insulation breaking down in some way.

[@idi0tdetectioninprogress]

The green goo is degraded di-isoctyl phthalate, and is considered to result from a chemical reaction between the pvc plasticiser and the copper conductor. The temperature performance of pvc was uprated by including an anti oxidant into the pvc compound, this encouraged the unwanted production of green goo.

[@annakissed3226]

@@idi0tdetectioninprogress cool thanks that makes perfect sense! Goes off to duckduck di-isoctyl phthalate...

[@christopliss9947]

A very good walkthrough Jordan 👍

[@lansdorf]

I always ask how many previous-owners, if it’s had 6 owners then you have x 6 DIY bodgerds installing joint boxes buried in the walls and under floors this comes to light during the rewire. Secondly if your putting new kitchens bathrooms and tiled or wooden floor down you must remove the old wiring otherwise it will come back to bite you in the future. Always get your roof gutters electrical plumbing and drains spot on. Price wise for medium 3 bed semi and garage consisting of DB cooker shower and a mix of 42 skt and lights, garage sub main DB. £5,400 I estimate 140 hours at £30ph plus materials.

[@dannythegreat453]

Far to cheap - but fair play if you can do the spec for this price ! I’d have to sub it out - just wouldn’t be worth my time .

[@philipdeacon5186]

High sockets are good in areas prone to flooding

[@MartinPHellwig]

Had a rewire done last year, the stuff that was in there was original 1920's wiring with a lovely three wire fuses bakelite box, though only one fuse was actually used. Mind you, technically there was nothing wrong with it, just the home insurance company refused to insure us :-)

[@ItzD3fW1sH]

Blimey. It had a good innings though!

[@Ragnar8504]

@@ItzD3fW1sH I strongly suspect some of the wiring in the place I live in is still original from 1914. VIR singles in conduit. The really old bits only supply a few lights so I haven't bothered rewiring them. We do rewire bits every time we redecorate a room. IR tested at >1000 MΩ.

[@ItzD3fW1sH]

@@Ragnar8504 fascinating stuff. Bet the original installers didn't anticipate it to still be in use over a century later!

[@annakissed3226]

Good point about house insurance & fire risk

[@Ragnar8504]

@@ItzD3fW1sH Probably not! Landlord EICRs became a legal requirement in 2008 so slowly really old wiring is being replaced as places go on the market but there's still a lot of ancient stuff left in Austria. Back in the 90s you could still see plenty of non-earthed sockets (i.e. pre-1960 installations).

[@DjGiluk]

Useful video, thanks

[@CatherineMohamad-nn2qx]

Brilliant video

[@kolt9307]

We bought a new house last year. It came with an EICR which passed. Yet every plug and switch in the house had loose connections and my favourite was the exposed lighting connections in the loft on insulation in plain sight. I guess not all EICR's are the same 😓

[@dasy2k1]

My house was built in the 50s with VIR singles. It was then rewired at some point in the late 00s (it's 17th edition post ammendment 2 bit pre ammendment 3) But whoever did it then did it very much to a price. Stuff has been added in surface mount boxes all over the place Hence I'm planning to get it done in the not too distant future when I need to do some re-plastering anyway as I eventually want a solar system (when I can afford it) and my feel for the current system is that it will need doing for that

[@modjohn]

Taking the example bungalow you were in, roughly how much would it cost to rewire as an example of the ball park expense a rewiring should cost? Thanks for the helpful video

[@alancooper7018]

If it wasn’t for the extensive wiring modifications then it would definitely not require a re wire. This pvc wiring could have decades left in it. Yes the cables plasticity may degrade and the cable becomes stiffer with time but providing the IR tests are good the cables are perfectly OK and are likely to remain so.

[@rhysjones1189]

Depends, if there is over 100mm loft installation covering the existing cables in the loft then technical it could. Look at ref method 101, also ring final circuits have to carry 20amps per leg if protected by a 32 amp mcb.

[@KevinSmith-ph6jv]

I would probably recommend a rewire too in this circumstance. Especially as there are full renovations taking place. That way the wiring will last their life time and something you don’t have to worry about

[@cglees]

Exactly! IR test will provide the answer in under 5 mins

[@JDUK71]

Technically it's fine but it needs a full rewire, what a surprise!

[@efixx]

Green sleeving in the CPC dates the wiring as pre 1977. Green / Yellow was then introduced.

[@nitrofar34]

Usually goes along with the old 2.5 T&E with the 1.0mm cpc ring final. I’ve always noted it but not coded it unless protected by a 3036 fuse then C2.

[@davey6024]

Note to self during eicr. If green sleeving present, estimated age of installation is 50 years.

[@efixx]

@@davey6024 Heavily painted wood chip wall paper is another clue 🕵️‍♀️ 😅

[@efixx]

@@davey6024 Heavily painted wood chip wall paper is another clue 🕵️‍♀️ 😅

[@efixx]

@@davey6024 Heavily painted wood chip wall paper is another clue 🕵️‍♀️ 😅

[@WilliamPayneNZ]

When the wires behind the fuse panel have lost all their insulation is usually a good sign. That’s what my house was like before being redone. Also still have fuses is probably another good sign haha. My house didn’t even have an earth anymore.

[@johngoard8272]

Have often wondered about that green "goo" but at least I know now.

[@jamessikder2057]

Nice job. I love this type of job electrician.

[@rickthescrewballpeacekeepe7387]

According to all this, my house needs rewiring. Fuse box is 1950's Wylex, old VIR replaced 20 years ago but some lights have no earth, silver multistrand T&E for sockets, 1970's cooker socket with dodgy earth, conservatory sockets on 1mm T&E and a messy junction box under the stairs, all the above is working as of 2022!

[@meganjperry9489]

hehe

[@PaulPaul-chillers]

It don’t need one of your thirty grand requires, that’s for sure !

[@clivewilliams3661]

Socket heights on all builds coming under the Building Regulations now need to be at least 450mm above the floor level, all electricians should know this. the sockets as shown therefore comply with the latest regs Electricians only ever consider their own trade requirements. To rewire any property with concealed cabling there will be a need to remove the redundant outlets and the sheathing/conduit and install new sheathing/conduit, both operations will involve taking plaster down back to the bare wall. Fishing new cables through old sheathing or through existing stud walls is not recommended. That then leaves the job of plaster making good, which in my experience for 90% of the time the repair looks like a patched up job. Invariably, to get an acceptable finish the whole wall will require a skim coat and thereafter new skirtings, architraves and the like and then redecoration. A re-wire is not to be taken lightly and the making good can get expensive.

[@Woodkin007]

That's bullshit. In an old victoriana house you don't need to rewire new sockets to 45cm. Do you lecture people about wheelchair accessibility as well? 😂😂😂

[@clivewilliams3661]

@@Woodkin007 I just stated what was in the Building Regs, which are the minimum standards for all new installations. The height requirement is to assist all those that can't bend to disconnect a plug that is no small number. If you can bend to pull out a plug enjoy it because there will be a time when you can't. As regards wheelchair access, apart from not disadvantaging those that have to use them, the able bodied benefit from the space that it generates since we have accepted the rabbit hutches that are now built, being generally 7/8ths of the proper size. PS. I you are considering the electrics in an old Victorian house and you want to be traditional then leave the electrics out because they didn't have them and install gas lighting as an upgrade from the candles they would have used.

[@SouthCoastFinest]

That house looks like a carbon copy of mine. I have the exact same switches, fuse board (the old style you showed) and sockets. I'm more than likely going to put a heat pump, solar panels, batteries and (wet) underfloor heating in after the rewire is done. Is there anything you'd recommend doing/changing with these technologies in mind?

[@davidclarke2513]

Just because the property was originally wired in the 70s and and has old sockets and switches doesn't mean it needs rewiring,if the cable has not been tampered with and has been in the same position and hasn't had any overloads on the cables then after a couple of tests it will prove that it is still in good order.

[@fahmidamiah]

Hi there, thanks for this video. I think it should be standard that buyers get an electrical report for the property they intend to buy - what if the seller doesn't agree to pass on the report you mentioned at the beginning of the video, or no longer has it? How much would it cost to have someone like yourself inspect the electrics for a home buyer before deciding to purchase the house? thanks again!

[@tonyknight9912]

Nothing wrong at all with higher level sockets, that's a personal choice and maybe dependent upon the mobility of the occupant. One doesn't rewire based upon styles or fashion unless it suggests that the age of the installation is pre - pvc cabling with other issues associated. The green goo issue is obviously a problem and I believe happens with early PVC cables 1966-71 sort of time whereby there is a chemical reaction between the plasticisers and the copper cable.

[@robtheplod]

Curious to know if the quality of copper in older cable from the 70's is better than todays?

[@nitrofar34]

Usually it’s the wiring accessories, like those old MK sockets and switches. Proper brass contacts unlike some of the crap plated metal contacts today.

[@zoltrix7779]

I doubt it, cable quality is something that has definately improved. Still have no idea why the UK is installing solid core cabling and not isulating earting conductors the whole length of the cable.

[@zoltrix7779]

I am with most ot the commentors, yes rewire it if you going to do a full renovation. Otherwise, its a waste of money. you could extend the sockets down if needed. Otherwsie, no re-wire required here. Just swap of the sockets and switches out to make sure the conacts are frsh and you'll have some nice looking bakelite.

[@DrQuadrivium]

No doubt a plumber would say the house needed all new pipework. A roofer would say the roof needed a lot of work done. A kitchen and bathroom fitter would say the old kitchen and bathroom needed ripping out and a nice 'modern' kitchen and bathroom installing. Etc, Etc......

[@simonabbott7323]

Harmonised colours came in on 1 April 2004. There was a two year overlap between old and new colours. You could use either old or new colours until 31 March 2006, but you couldn't mix them. After 1 April 2006, the use of the old colours was not permitted in new installations or when making changes. The 14th Ed. was reprinted in metric in 1970. Green earth sleeving was compliant until 31 December 1977, after which green/ yellow was to be used. The sockets are not really at a ridiculous height - think of the modern day Part M! No earthing in lighting indicates pre 14th Ed. I believe this edition was published October 1966. While I'm talking about the 14th Edition, when the 15th was introduced in 1981, there was great consternation because electricians could not get to grips with the new format. So it was agreed that the 14th Ed. could continue to be used until 31 December1984, with the 15th Ed. kicking in the next day.

[@Eurobrasil550]

I'd be interested to know our of curiosity what are the oldest original sockets, lamp fittings and associated wiring still in use that electricitions have come across in recent years?

[@jayzo]

Is there a situation where you would recommend _against_ rewiring a property? When I eventually jump onto the property ladder I want wired ethernet in my house so would be inclined to rip all thee electrical wiring out and re-do it while the Cat6 gets chased in too) regardless of its actual age (unless it was done a few months before moving in, maybe).

[@andrewsmall6568]

Its a question of cost, a rewire is an expensive expedition. Can be £4k upwards to have an electrician do the whole job (Vs a labourer and have an electrician just do the cable work - some sparks wont do this), plus the cost of making good the plaster and redecoration. Most of the time there is absolutely NOTHING wrong with old cable, all tests are within tolerance. Similar to your roof, its 50 years old but lets in no water - a roofer recommends it replaced (he would) but does it need it.... no. As this guy says there is a common sense point in time to rewire, if you are gutting the place then you are investing for the next 50 years so you avoid ripping out all the renovations you are doing in a decades time. And you get the plug sockets in the exact place you want and need them. Personally i would route data cables in "replaceable" locations such as voids, underfloor, or in capping. The cable is not as durable as twin and earth (thinner cable) and needs replacing more often. Cat 7 is on its way. If doing a rewire then of course routing the data at the same time (as well as audio cable) is sensible.

[@nrg-5003]

Technically safe and no need to rewire, but like you say it's an empty property and it's also a bungalow so you may as well just rewire. I don't think the new homeowners would want extension leads everywhere due to lack of sockets!

[@tkemot5240]

Jordan, watch out for that screwdriver close to your eye! Keep safe!

[@philtebble4390]

Good info my friend 👍

[@FluxLabsProjects]

Good video as usual, but one comment, old colours does not mean it dates from the 1970s, old colours were only phased out in 2006 ish so could suggest the install was only 16~17 years old, well with the service life, if correctly installed. A better telltail here is to look at earth sleeving. If it's solid green like yours, then it is 1970's era, if it's green/yellow it's a bit newer.

[@philipsmith0752]

i guess it depend what you want to do with the property , if you just need to make sure its safe for now so thy can give it a lick of paint and new carpets then to save up for a complete revamp after you saved up to do it then thy need a rewire then

[@DrQuadrivium]

Philip Smith ... "A lick of paint"... good grief people should be using qualified, professional interior designers. DIY interior design should be banned as a major mental health _(and taste)_ hazard.

[@stevecraft00]

Worth pointing out, cable from the 70s can be perfectly sound and test out perfectly. Pvc metric cable without green goo is a pass from me. Even pvc imperial cable can test perfectly. A lot of 60s tower blocks are still on original imperial conduit wiring. Tested every 5 years, no issues.

[@seantaylor9758]

These old cables will last a lot longer than the modern stuff with some new being chinese! Cables that haven't see the light of day are probably in good nick except for rubber and cloth insulation types.

[@makg4655]

Do you agree that a HOME REPORT which is needed to sell a property should include a EICR ? after all the electrical system is a major part of the build and just as important as all other aspects. Esp as we see more solar/GSHP/battery walls etc

[@annakissed3226]

I certainly agree when I discovered that our energy report that gave this place a very high score was in fact self-certified with no test data whatsoever!

[@andrewsmall6568]

No. Because replying on someone else's mate/brother/father who happens to do electrics to issue an EICR to rely on to pay several hundred thousands of pounds on a property is a recipe for disaster. Get your own survey, and own EICR with your own trusted electrician who works for you.

[@jonathaneastwood2927]

No needless and will just cause more problems than it solves.

[@EsotericArctos]

The green stuff, is not from the plastic being manufactured incorrectly. It's more the older chemicals used at the time and the plasticiser separates or decomposes. It's an unfortunate side effect of plastics, particularly PVC style plastic, of a certain age. Silicon based insulation doesn't suffer from this effect, but silicon based insulation is rarely used in house wiring. I've seen a lot of power cords from older HiFi equipment and even some power tools suffering the plasticiser decomposition as well. Luckily in appliances it's an easy fix of changing the mains cable, providing the wiring in the rest of the unit is good. It doesn't seem to matter if it is ELV, LV or whatever voltage, the plasticiser seems to break down the same in the plastics of a certain era. Some things do improve over time, though I sometimes thing this older cabling, had the plastic been able to survive, was better quality as the copper seems to be manufactured to a higher quality. Just let down by the lack of knowledge and stable chemicals in the plastics of the time.

[@meganjperry9489]

Existing wiring 10 years left in it? As best I could see, it was all pvc t&e, and there isn't a specified lifespan on that ? Replacing sockets/switches, they are tired yes, but wiring, no.

[@CADstruction]

So what is the difference between the red black vs blue brown cable apart from obvious and slightly thicker earth cable.

[@HA05GER]

Pretty much mirrors my council house i even have the green goo but obviously the council wont bother rewiring. It does have a brand new board with the independent afdd/rcbos with the fault lights. Im guessing yhey tested everything when they replaced the biard last year so even though some green goo its probably not the end of the world. If ive seen it ill clean up the connection with a new socket.

[@marceljoseph7416]

Where r your trousers from?

[@funkpop-l8o]

How do wires "have life in them" ? Arent they basically forever lasting ? (Except for that plasticizer failure) Of course there is damage from bending the wires many times, but not to an extent of removing them.

[@timhall4355]

This house as you say does not need rewiring. Yes it is not new but equally it is compliant. It is so easy to use the expression old, old fashioned etc. The real question is are there signs of degradation of the conductors from the results of the insulation testing. Reality is the rewire for me would be justified by the massive task of relocation of wires, sockets etc. You get to a points where it just makes sense. Old fashioned doesn’t mean beyond serviceable life. Those terms would put me of .

[@dutchgray86]

My house could do with a rewire, early 70's and hasn't really been touched since, got cartridge fuses, 3 for the whole house, no RCD apart from the electric shower which is on its own mini distribution board. Main issue is the one socket per room apart from kitchen and lounge, which have two each. That said I doubt anything installed today will last the 50 years that the early 70's stuff mostly has.

[@gregploysa4135]

Do i need an RCBO between the house and hot tub?

[@eric4709]

Love the prodding with a screwdriver - even if most of the shaft is insulated........

[@woody412]

Swap the pendant. Test the circuit impedances etc. If ok no re wire !!!

[@electricalstuff259]

How can you say it needs rewiring without doing a single test? The WIRE only needs changing if it's not fit for purpose. It being old colours or whatever is irrelevant.

[@wisteela]

Now I know why lights are lined up like that. That's how the one is in the bedroom of my 1970s flat.

[@havaden96]

As an electrician, i can't stress how many times people has "Renovated" their new house. Only to get electrical issues and having to tear it all down cause the wiring is even as old as pre-war, pre-plastic era. With crusty and dried out woven fabric insulation, inside grounded steel conduits. (How they did it back in the day here) And when the wires get that old and crusty, they wont bend easily so trying to get new wires through those old rusted out conduits? nah the whole place has to be torn down.

[@jayseabie215]

Looking at switches and sockets doesn't necessarily give you any idea about the wiring. I've changed all of them in my house but of course left the wiring alone.

[@robtheplod]

same here...

[@gordonn4915]

Lowering the outlets would probably drive a retire as in most places in wall splicing is not allowed. So the old boxes would have to stay with new ones below.

[@Alchemetica]

In Australia there is no 5 year or so required inspection of a domestic or I assume commercial property. Is that because Australian electricians do such a good job first off there is no need for any future inspection :) I would be interested to hear your thoughts on the matter of compulsory inspection. This next law/legislation had to be masterminded by some electricians association. It varies by state. In Victoria the only legal electrical work a non electrician, basically the home owner is permitted to do is change a light bulb. The penalty for doing other electrical work ranges from a series of fines to a gaol sentence. However, with complete in difference the big hardware, Home Depot type stores have aisles of electrical components, cables etc., and one can often see the weekend warrior filling up their cart with junction boxes, wall switches, cabling, capping and so on. Somehow I think the law is a toothless tiger in regard to the legislation. In the electrician programs on KZbin from the UK and the US there is often DIY advice on electrical work or commenting "this is a DIY job". Does that mean people can undertake electrical work in England without repercussion from the law?

[@nitrofar34]

For a Domestic setting we have Part P of the building regs. It covers certain notifiable works to building control which has to be done by a competent electrician, these are: New circuit installation, works within a special location (bathrooms wet rooms) and a Distribution board change. Any other works such as additions to circuits, replacing accessories etc comes under non notifiable work so can be done by the homeowner, but it is recommended to be done by an electrician so a minor works cert can be issued.

[@nitrofar34]

Usually domestic installations are given 10 years on an EICR report, however it may be reduced if when testing recommendations are found, maybe a lowish insulation resistance is found not enough to fail but nearing the limit.

[@idi0tdetectioninprogress]

This would probably have been a private rental. Regulation was introduced from April 1st 2021, that all private lets need to achieve a satisfactory EICR, and every 5 years thereafter.

[@andrewsmall6568]

Only for rentals, as a landlord we are required to have electrical safety every 5 years (some exceptions) and gas every year and hold the issue certificates. No such regulation for houses that you own and live in yourself.

[@jonathaneastwood2927]

Yeah Australia is an uptight nanny state at times.

[@kevinrichmondprice2449]

Don't think you can generally sale a house nowadays without an electrical report in the sale pack.

[@OraEtLabora0]

9:49 do you also have a wall-chaser, like Tomo does?

[@TheOfficialBatteryMan]

I was expecting to see an Insulation resistance test

[@davey6024]

My 150w sun lamp in the bathroom caused the VIR singles in my timber framed 3036 board to melt. Do I need a rewire?

[@Beastriderpav]

🤣🤣🤣

[@gordonn4915]

It might need upgraded to 90C wire. Only the segment by the light needs updated so could add junction box if rest of wiring is ok.

[@davey6024]

@@gordonn4915 okay great. I think it needs an earth. The nearest earth I can take is off the lead cable that supplies the sockets. So I'm guessing I just solder a 1.5mm earth onto the lead sheathing and take it to the light.

[@timbaker577]

Have watched 29 seconds almost certainly you will say it needs a re wire. Looking after your industry.

[@KingsG82]

I would always suggest an electrical condition report. You need to have an MFT and properly test the continuity of earth, the insulation resistence, earth fault loop, etc. You cannot walk around and just say "yeh thats fucked mate". If youre going to make other ammendments building wise to the house, 100% alter your infrastructure.

[@xxwookey]

As you say it's easy to run all the wiring through the loft, but unless you gasket all the wiring penetrations you will add a great deal of air leakage. Do you gasket wiring penetrations of the airtightness layer (normally the ceiling into the loft) as a matter of course? You really should if you don't already.

[@annakissed3226]

However if they were instead thermally & air isolate the loft but fit a hepa heat exchanging air handler, it would improve the internal air quality massively & improve heat loss without needing to worry about penetration of the external air barrier. Do you watch Matt Risinger channel on KZbin?

[@xxwookey]

@@annakissed3226 I do watch Mr Risinger and he's very interesting, (but I don't always agree with him). I'm not sure I follow the logic of your suggestion. IMHO you _always_ need to worry about random holes in the airtightness layer so that you can have designed ventilation through holes you actually know about. Ideally just two of them for the MVHR unit (which may be what you mean by 'hepa heat exchanging air handler', which is probably what Americans call them. (I'm British). Even if the MVHR unit is in the loft (which it often is in UK retrofits) you still need to avoid random air leaks to/from the loft, and seal all penetrations. The airtightness layer can be at roof level instead in which case holes into the loft are not through the airtightness boundary, and indeed that's generally a better design, but less common as it's more expensive.

[@annakissed3226]

@@xxwookey Sorry for my poor use of the Queens English, your are completely correct in all these things, I was just explaining things poorly. For example the MVHR is what I think. I was trying to describe: something that interleaves the input & output pipes so that the heat is retained in the building by the heat in the exit pipe transfering to the colder input pipe having first been drawn into the building by an electric pump though a HEPA filter??

[@xxwookey]

@@annakissed3226 Exactly - that is indeed what is usually called an MVHR (and sometimes MHRV) Mechanical Ventilation and Heat Recovery. But they only work when the building airtightness is reasonably good (ie. builders plumbers and electricians haven't left/made loads of holes everywhere). Better than 3 air-changes-per-hour (at 50 pascals) is the typical rule of thumb. UK building regs are terrible on this front and still only require 10 (m3/hour.m2@50pa) in brand new building, which is hopelessly leaky. Passivehouse is 0.6ach.

[@sallmanny5709]

There is still live terminals behind a pendant depending on how it’s been wired , so I wouldn’t say it’s safe to unscrew ?

[@09weenic]

He did say to turn off the circuit at the consumer unit