awesome flight like all yours. that wing is very good for long range due to its high cruising speed and low fuel consumption.
@MyRazerZone4 жыл бұрын
Thanks bro.
@igoryurchenko8233 жыл бұрын
Dear MyRazerZone. Thanks for the nice videos! I decided to follow your lead and bought a Brother Hobby Avenger 2812 1115KV. for your Mini Talon. In my case, I use ESC Hobbywing FLYFUN 60A V5, Li-ion 6S 4P, but the engine heats up at about 65-75 degrees for 1-2 minutes even without a propeller at 50 percent throttle. I wanted to know from you, too, the engine temperature is high, or just my case, and I have a marriage.
@mohanndalahmadi3 жыл бұрын
Awesome flight. It looks like you’ve got the ESC telemetry configured. I am currently trying to follow the ardupilot documentation with no luck. Wondering if you had to do anything special to get them to work? Thanks 😊
@MyRazerZone3 жыл бұрын
Hi, just wire the telemetry pad to any available RX and configure it as esc telemetry on INAV configurator or MissionPlanner.
@goodboyrc53983 жыл бұрын
Super nice flight✈✈✈Sir baka pwede malaman san ka nakabili ng parts na gamit mo dito esp. yung crossfire rxtx, prop and motor. Til now sticker plang nakakabit ko sa ARwingPro😂
@MyRazerZone3 жыл бұрын
Sa shopee Lang boss. Pinoyfpv tska aftershow pH mga local sellers sa shopee na kinukuhanan ko. Yun iba overseas na shopee parin. Haha 😁
@kadegreen53565 ай бұрын
Inspiring footage, but arent such long flights illegal? Ie you need to visivlbly see the aircraft and have a spotter?
@stonedDawg3 жыл бұрын
oh so nice.... hey man, btw did you enable the airspeed (use_arspd) or not?
@EnglishTurbines4 жыл бұрын
A fast low drag cruiser...I'm guessing you didn't fit the GoPro in there..?...and fitted battery instead?..Well done breaking 100kms...So how many 18650 cells in 5S config..?...Ten?.....Why do they assume we want a bloody GoPro onboard?....🤔🙄
@MyRazerZone4 жыл бұрын
Yup! No GoPro. Im really impressed by this wing. I think it might replace my S1100. I'm Going to attempt to max the range soon. 5S3P = 15pcs 18650 Li-Ion cells. Battery compartment is not so deep so Fitting in Li-Ion needs some test fitting before soldering.
@EnglishTurbines4 жыл бұрын
@@MyRazerZone I recently made a 6S pack for a friends quad...Be interested to see how you fitted all 15 cells in there...Maybe a still in the next Video...?...🤔🤔🤔🇬🇧
@Joneszee19694 жыл бұрын
Great flight thanks for the footage. How much does that battery weigh?
@MyRazerZone4 жыл бұрын
Hi! Thanks! 😊 5S3P 9600mah 18650 cells is 743g.
@k1ortia3 жыл бұрын
That,s an amazing achievement. do you have a link for the 1.2ghz antennas? I cant find any decent ones anywhere. Cheers
@unixoid333 жыл бұрын
prodrone.pl for example
@jharwinbarrozo3 жыл бұрын
I wonder what's the brand of 18650 you're using? Care to share? You mentioned 5s3p and it has total capacity of 9600, so per cell 9600/3 = 3200mah.
@MyRazerZone3 жыл бұрын
Yes you are correct. Cells are 3200mah each. GREENPOWER brand. Bought it from a shop that sells solar panels and other stuff.
@akkarawinampin97414 жыл бұрын
Do you have a link for your vtx? Or tell me a more about your Vtx. Thanks friend.
@MyRazerZone3 жыл бұрын
banggood.app.link/8Lhm9TYJhdb
@javito45024 жыл бұрын
Hi. how to configure failsafe with R9 slim + and ardupilot. that it is necessary to do in each thing. thanks
@MyRazerZone4 жыл бұрын
Just set failsafe in your radio to cut. Once THR signal goes down, ardupilot senses it as failsafe and it will initiate Circle then RTH. You can test it on the bench while connected to a computer (do not connect batt) turn off your radio and check status screen in the first tab of misaion planner.
@MyRazerZone4 жыл бұрын
kzbin.info/www/bejne/envMoZmmZ52li8U Failsafe is at 8:30
@dekiaza3 жыл бұрын
Hi. You flying this Arwing pro, with telemetry or with vtx?
@MyRazerZone3 жыл бұрын
I have mavlink active on crossfire and also VTX. Thanks!
@dekiaza3 жыл бұрын
@@MyRazerZone how you connect the crossfire with mavlink? Do u have video tutorial about this? Thank you 🙏