Assassin's Crossbow Homemade

Assassin's Crossbow. Hello, friends! In this video, I'm excited to present to you my new project - the Assassin's Crossbow. It is a highly compact crossbow with a unique design. To create this crossbow, I used aluminum, wood, and a small piece of brass, which adds to its visual appeal and durability.
Most of the work was done on a lathe, making the manufacturing process much easier. I also used a Dremel tool to create the groove for the string. The result is a fascinating crossbow that is both compact and surprisingly powerful, as proven during its testing.
I invite you to subscribe to my channel, share this video with your friends, give it a thumbs up, and support me in my creative endeavors. Your support means a lot to me and keeps me motivated to create new and exciting projects.
Thank you all for your attention and support! Don't forget to subscribe, share, and like the video. I look forward to seeing you on my channel for more exciting content!
#serengyarchery #crossbow #assassinscreed #assassin

[@serengyarchery]

Hello friends. I spent a whole week making this crossbow to surprise you once again. Did I show the entire process in enough detail?

[@heamorhoid]

Nice job. I would like to know how you are makeing it´s string? Thx.

[@serengyarchery]

@@heamorhoid Thank you. Bowstring made from fishing line

[@ssrvendra]

Perfectly made. Salute to your patience❤❤❤❤.

[@RobinHood-ms8vt]

There is a terrible expression, the one who makes the past is not terrible. But the one who makes the future is afraid. So whoever creates the past weapon is not terrible. Only the one who created the weapon of the future, which only he has, is terrible. And if he uses it, then the whole society will completely disappear. Since the weapon of the future is the weapon that can one hundred percent destroy everyone, and there are many such madmen.

[@tokanosunsay3653]

*Hello! The process is shown well, but there are no dimensions of all the details.*

[@skakpedersen]

Beautiful work. Thanks for sharing 👍

[@brenttesterman3171]

Absolutely amazing! A true work of beauty, thank you.

[@ederbarsim]

com um maquinário desse em casa dá p produzir até em série!!!!

[@canavanibus]

Nice touch designing it to be broken down/reassembled. Just needs like a poison reservoir to tip your bolts, similar to a patchbox in the stock. Thanks for sharing.

[@kwiebje24]

This could be a James Bond piece of armour. Nicely done 👌👌

[@hans-jurgenbraun6587]

WOW - an excellent job! Thank you so much for this very interesting video.

[@serengyarchery]

thank you friend

[@Georges-MILLION]

Très joli ton petit jouet !!! 😃 Félicitations .👍👍👍

[@trappedinroom1014]

There’s something very therapeutic about watching metal lathe machines! 👍🏻💕🤗

[@odairjosemayerthelau812]

Magnífico trabalho, muito bom trabalho!! ( Magnifique Job, much good Job!! ) 🇧🇷👌✌️✌️👍👏👏👏👏👏❤️

[@SPDFRK]

Well done.

[@Sempaymillagi]

Muy bien terminado

[@Classic-Adventures]

Finally, a crossbow that does not drag the string across the top of the stock. Nice build. However with that low poundage, the LAST arrowhead you should have is a 3 blade. Should be a cut on contact 2 blade, if you actually want to penetrate.

[@jonbender9110]

This is some James Bond stuff here

[@soilentmichi]

Super..homemade...hab zu Hause von den Präzisionmaschinen bestimmt noch ein paar rumliegen...:)

[@Orion3950]

Amazing work! 👍🏻👍🏻

[@MsTawse-pz4pl]

Home made.......if you live in a machine shop......

[@user-gp2px8kr5d]

Not true. Any self respecting craftsman would have a lathe, drill press and related tools.

[@kennybarrett5413]

I know right 😂

[@artrik69420]

Even my dad have most of these in his bedroom lmao

[@masterQ20]

Thanks to the skillful and intelligent craftsmen who beautify life.

[@serengyarchery]

you're welcome

[@user-ps1ur9be1r]

선반 천재네요...

[@sonnybonowig7538]

Great build and instruction. You showed enough that a person could still build this without the machinery such as a long bushing for the barrel. You can build your version with this guide. 🤘

[@serengyarchery]

Thank you friend.

[@TheCardFanatic]

Do you sell these anywhere or all the parts once machined? I'd buy one from u in a heartbeat so cool... And I'm asking u that seriously. I don't have all the metal work machines. Lmk.. either way, very cool

[@antitheist9976]

Genius, love it 🙂💯

[@lmwlmw4468]

Nice work.

[@serengyarchery]

thank you friend

[@statesrights01]

Sitting here with a cold snap outside, got my hot drink and Really loving this!! Great job indeed

[@serengyarchery]

Thank you friend.

[@stevenkeithley4336]

Cool video bud keep'em coming. Wishing you and yours the best. Stay safe and be well brother. 👊😎🤙🍻

[@serengyarchery]

Thanks a lot. I'm very pleased

[@Skywalker834]

Krásná práce 👍👌👏🍀😉🥂

[@serengyarchery]

👍

[@user-gp2px8kr5d]

Considering the minuture size, your crossbow is well designed, well executed with excellent results. Well done Sir

[@serengyarchery]

Thank you

[@chriswerkes8313]

Sir, you are a very good craftsman. I can see where you could use a milling machine, especially where you slotted the body by drilling and filing.

[@serengyarchery]

Many thanks friend. I don't have a milling machine. Haven't worked on the machine yet. but i plan to buy it

[@robertmiller6822]

This is awesome shoots out of a barrel aswell, i saw home made and then thought cool i wont need a lathe or anything big, first tool is a lathe. I want one.

[@serengyarchery]

Thank you

[@volkangunyeli]

Perfect job master👍👏👏🙌

[@serengyarchery]

Thanks a lot

[@davidrobertson1980]

Beautiful work man

[@maciejfidos4014]

Cudo!

[@dulboreyofficial]

You work so good 😍❤️❤🎉

[@tra767]

Wonderful work ! I want one !

[@excaliburturkey8208]

Your craftsmanship gives the feeling of a crackhead in the best way, keep up the good work

[@serengyarchery]

Thanks a lot

[@dihezel]

Дивлюся ваш канал з самого початку, дуже цікаві та класні роботи🎉

[@serengyarchery]

Огромное спасибо

[@jozinsbazin]

звернув увагу, що в нього токарний станок зроблений в лнр?))

[@serengyarchery]

@@jozinsbazin Ты не внимательно смотрел. Патрон сделан а ПНР. польская народная республика

[@jozinsbazin]

@@serengyarchery согласен, спасибо за ответ

[@user-fn5qe4go1b]

Que bien k es casero,, al rato lo hago ya k todos tenemos un torno y taladro industrial en casa

[@serengyarchery]

Who wants to find the opportunity. who does not want, he is looking for a reason

[@petroniopulino5971]

Very Educational! Congratulations!

[@serengyarchery]

Thanks a lot

[@rinzler9775]

Wow, nicely crafted.

[@serengyarchery]

Thank you friend.

[@josegregoriomoralesferrini4587]

Good job Sir wonderful 👍

[@josegregoriomoralesferrini4587]

One wonderful job Sir 👍

[@pavelboruta3895]

Wow!! Cool! 👏👏👏

[@serengyarchery]

you're welcome

[@JRVPC]

Legal, bem caseira, todos tem um torno em casa kkkk

[@valmir144]

E que torno! 😅🤣😂

[@TangentJim]

Wow ! - I learned a lot - Thank you . -- Jim

[@serengyarchery]

you're welcome

[@Tbc487]

That's just too amazing

[@serengyarchery]

Thank you friend.

[@FahrulRozi-cu1rr]

Sangat menginspirasi dan pekerjaan yg menyenangkan 😊

[@serengyarchery]

Thanks a lot

[@user-hv4ii5mk6x]

갖고싶어요

[@TronicMade_original]

Nice work.👊

[@serengyarchery]

Thanks a lot

[@theoronig6440]

Was für ein hübsches Teil, alle Achtung.

[@serengyarchery]

Thank you

[@JAKE3914]

nice havin' a lathe.

[@josegregoriomoralesferrini4587]

mucho nível de fabricación

[@heikyaw5687]

thank for you teaching

[@user-zw8fw2ok1l]

awsome

[@mrkiky]

Should just cut the grooves all the way, so you can still have fins on your bolts. No way they're gonna fly straight for more than 3 meters without fins.

[@littlehills739]

interesting take on this tube

[@serengyarchery]

👍

[@Oblivionpma]

K, now i wanna make a crossbow.....

[@user-gp9hz8zf5u]

👍👍

[@AirTiki2007]

Ich wette, wenn wir DAS in unserer Dreher Ausbildung gelernt hätten, wären wir alle viel motivierter gewesen... 😁

[@serengyarchery]

Agree

[@genapyatnichenko5721]

👍когда смотришь на такое , понимаешь что не все еще потеряно в этом мире! Молодец🤝

[@serengyarchery]

Спасибо за поддержку дружище

[@neilmarsh1904]

Nice work! Just the thing to implement regime change when the dictator is a budgie or a hamster. ;)

[@vdsmade]

Great job 👊😎

[@serengyarchery]

Thanks a lot

[@MichaelAnthony-me6ho]

Far from homemade great workmanship beautiful crossbow

[@brainentrainmentlibrarychannel]

Excellent!!!

[@serengyarchery]

Thank you

[@dihezel]

Дуже класна штука😊

[@mouha-damashii.1973]

👍

[@Marianao48]

De que eres un gran experto con metales de eso no hay dudas ,pero ponerlas aqui donde los jovenes lo ven ,no lo veo bien

[@serengyarchery]

Thanks a lot

[@user-wi9vi6vg8f]

RESPECT

[@GerhardOli4]

Impressive. What was the total cost and hours spent on making this? Would love to buy one of these! Very cool.

[@serengyarchery]

Thank you for your interest. this job took 3 evenings. Unfortunately, I'm not selling anything right now. possibly in the future

[@domjuandeperon]

Show.

[@sfsdfdfdf6587]

0:06 nice air rifle shot:))

[@cetinoren7441]

👏👏👏👍 bravo süper👏👏👏

[@GVBiggs524]

Suggestion. For the longevity of your file, use it on the forward stroke only. The backstroke only dulls the file teeth.

[@tettazwo9865]

Proven wrong.

[@Thomas-rz5nt]

That’s a myth

[@Guitarplayer724]

That’s the problem with KZbin. All these alleged experts putting out consistently bad information. 🤔🙄

[@GVBiggs524]

@@Guitarplayer724 I have been a mechanic all my life. From the time I was able to use tools at the age of 3, in 1963, until last year. I know how to use tools correctly. Files can't cut on a backstroke, the teeth don't face that way. I am no expert but I DO know how to use tools correctly.

[@Guitarplayer724]

@@GVBiggs524 Whether the file cuts on the backstroke was never the question. It’s your claim that it will dull the file, which just isn’t true. On the other hand, it won’t cut either, which is just a waste of energy.

[@FerSumo]

Muy linda la ballesta casera... el único problema es que no tendría un torno " Casero " jajajajaja el resto genial ! =)

[@salemyo2525]

🤣🤣 lo primero que salta a la vista es ese pequeño detalle... nada menos que un torno...

[@Patshes]

🆒😎👍!

[@user-ow5dv7xp8p]

Золотые руки!

[@jesterolog7]

good

[@stevenvanravesteyn3647]

which lathe do you have?

[@serengyarchery]

TV-6

[@mulyadiyadi5059]

Kreatif 👍

[@lindawallace6750]

C O O L. !!

[@user-nf7vs1zl2b]

Are you selling these? I would love to purchase 2

[@serengyarchery]

Unfortunately I don't sell anything right now. possibly in the future

[@maciejfidos4014]

Lepiej niż Słodowy!

[@b.r.kishore9359]

Can I also buy this crossbow. Please send some link to buy this.

[@serengyarchery]

Unfortunately I don't sell anything right now. possibly in the future

[@richardtravers8772]

Without a set of drawings, it's about as useful as a hip pocket in a singlet

[@SoyMarlonRD]

Esas no son herramientas caseras que cualquiera pueda tener a disposición. Esto es a nivel industrial!

[@salemyo2525]

si... la verdad es que el título está bastante mal. No quita que el trabajo sea grandioso, pero no creo que todos dispongan por ejemplo de un torno. Y ni que hablar de los conocimientos

[@user-yo8vd8um7u]

Genial Very Nice 10😅

[@serengyarchery]

Thanks a lot

[@glacier68]

I was expecting the Mennonite to pull a Colt 1851 Navy

[@ChristianVetter-jq8nb]

Cool mehr davon

[@OpenGL4ever]

7:32 If you had clamped the tool in your lathe and attached this milling tool to the carriage, you could have milled the spot out nicely by moving the carriage.

[@serengyarchery]

Good idea

[@marcosteixeiradarosar5269]

esta arma es mejor que las armas de fuego,Facil de llevar .

[@jeffdishong4853]

Nice, but not many are going to be capable of making it.

[@reginaldovianna8125]

Diga o preço é o zap. Já me inscrevi. Agilize uma. Magnífico cara.

[@serengyarchery]

Unfortunately I don't sell anything right now. possibly in the future

[@fulol]

dope

[@serengyarchery]

👍

[@josue78ellias40]

Que tipo de aço é esse artefato ❓🤝🏽🇧🇷⚓

[@serengyarchery]

it was a saw

[@musicmike1960]

So bad ass brah.

[@charleslee4772]

Sympa ... mais au lieu d'utiliser la fraise avec outil manuel, pourquoi ne pas avoir utilisé la perceuse sensitive qui avait un plateau ? Le perçage aurait d'ailleurs pu être réalisé avec une fraise - en plusieurs passes - et pas besoin de limer pour la finition ...

[@serengyarchery]

Thank you. The thing is, I don't have a milling machine.

[@sergeisergeev2484]

с такой штучкой ,чувствуешь себя человеком .....

[@peterernst5312]

Nice

[@serengyarchery]

Thank you

[@alessandrobisogni3838]

ok. grazie per la sollecitudine

[@user-jb9td3pe7n]

👍👍👍

[@cesurozkurt4895]

Homemade? Yes , every house has those machines.

[@rockerpat1085]

What You Don't Have These Machines At Your House??? I Do!!! You Are Slacking Son!!!

[@jasonsummit1885]

I happen to have a smaller lathe than his so I could only make a tiny version of this.

[@ferencm.3635]

O.K.Wery Guud4

[@pauljacobs772]

Homemade if you happen to own a machine shop.

[@theodoreyoung7946]

I would like to get a blueprint so that I can make one. Is it possible?

[@serengyarchery]

Thank you very much for your interest in my machine. unfortunately I did not make any drawings.

[@Choi_Han_Seon]

집에서 만들었다며... 처음부터 내집에는 없는 장비가 등장하는군요. ㅎㅎㅎ

[@afdalwhisper8842]

what is the tool name?

[@serengyarchery]

as you wish