Assembling the DMASUN Indoor Cycling Exercise Bike

[@fe-nan3537]

Wow 🤩 He has done everything by a single hand!!

[@purpledancerbmw5279]

Exactly!

[@lonekreativelee454]

THANK YOU SO MUCH!!! I was able to get everything done, but the darn seat...until your video! Game changer....daily rides here I come!

[@StayHomeHack]

Fantastic!

[@Tinkerbell91280]

I also came here for the seat instructions lol!!

[@lifewithalma8461]

lol same !

[@purpledancerbmw5279]

Had it for a few months, I'm ready to try to assemble.

[@venturawayzfamFirst]

Omg I can’t get seat on? It’s too small to sit on poll lol

[@ripeundead8239]

Mine came with the manual but it was so intimidating because nothing was labeled coorectly! Thanks for this!!

[@StayHomeHack]

You're welcome!!

[@daviddelgrande9563]

Thank you. I wouldn’t have been able to build this bike without your video!

[@StayHomeHack]

Great to hear!

[@iHumpStreetCones]

thank you for taking the time to record for us people that are brain dead

[@kathleenganley3173]

Thank you so very much!!! I NEVER would have been able to put this together without your video! Now I'm ready to go!!!!

[@laurie-meilabelle3353]

Thanks for the video ! I unboxed all the pieces and didn’t find any instructions manual until I saw the end of your video and I found it once my bike was all set up too 😅

[@StayHomeHack]

Haha, same experience 🤝

[@sammycarroll2771]

With no manual this helped me tremendously! Thank you so much for posting this video!

[@StayHomeHack]

You're welcome!

[@Alarmedtiger]

Thank you for this video! The manual is so terribly written it was confusing to put together but your video made it so easy!

[@debbiekavis7209]

Thank you for this video! My bike didn't come with a manual and you made assembly so easy!

[@Jimmyfly215]

great video, followed along step by step for putting together what was needed. thank you!

[@lucleadergaming3487]

Thank you! Ours came without any instructions 😡 Couldn’t have done it without you. 🙂

[@anichu8735]

thankyou Soo Much UwU,, THIS IS THE BEST VIDEO OF INSTALLATION.. We can Still see his Efforts he has Just done installation With 1 hand And I can't Even done it with 2 hands😂😐

[@jenniferreeve6999]

Mine didn't come with a manual either. Thanks for your help! And one-handed too!

[@StayHomeHack]

You're welcome!

[@adventurousethiopianwoman6998]

Thank you so much! Your video helped and saved my time. I was able to assemble the bike in 15min!

[@aravind4444]

Thanks for making the video without background music

[@StayHomeHack]

Welcome! You got it 😊

[@Angiebee.]

Thank you so much sir! I got this done pretty quickly with your help!!

[@gwaliorblack]

Thanks for posting this video. Got mine today with no instructions but your video helped me a lot. Happy biking.

[@StayHomeHack]

Cool! Happy that it is helpful. Enjoy!

[@lwatulatikambenji6281]

Thank you soooo much for this video. Made my setup very easy

[@StayHomeHack]

You're welcome!

[@justdanie7613]

thank you!! I don't have this model, but this really helped!

[@deborahradu1731]

Thank you! Had so much trouble with stabilizing pipes before I found you. Scotch tape to hold bolts! 👍 And you did it with one hand? Impressive 😊

[@Journeywithjayda1111]

Thank you!!! I just put my bike together watching your video I don’t think mine came with a manual anyways lol

[@StayHomeHack]

Glad that it helps!

[@purpledancerbmw5279]

Is he adorable or what....looks good!

[@jillsullivan3338]

Great video, I was up and riding in about 30-minutes! Thank you!!!

[@anthonytactics7592]

Thank you I was struggling with the seat

[@appydaysquilts]

Thank you for that video. I found it helpful as well

[@StayHomeHack]

You're welcome!

[@alexandrajack1623]

I appreciate this so much. Thank you.

[@brendamudereri1683]

Thank you so much for the video.

[@buffalospirits]

Couldn't figure out the computer bracket. Just needed a visual which your video provided. Thanks.

[@StayHomeHack]

You're welcome!

[@coopdogmillionaire1]

Very helpful, thank you!

[@karenwalker5180]

I’m having such a hard time getting the seat to stay on. I did exactly as you did and if I pull up on it just slides off. Any recommendations?

[@StayHomeHack]

I would use pipe tape to wrap the part on the seat slider before putting the seat onto it. Then, tighten the bolts firmly. If you don't have pipe tape, plastic tape or adhesive bandage strips should work too, but not ideal.

[@aMapleSyrupCaN7]

That was really helpful, thank you very much!

[@UnclePlaysBadly]

Thank you! Mine also had no manual.

[@StayHomeHack]

You're welcome!

[@colinbarrett3016]

Great video!! I used some WD40 on the handle bar sliding in because it was very tight.

[@remimetivier4395]

Like crazy tight? I cannot move and adjust the thing at all... I have to use hammer to move one 1/32th inch at a time :(

[@pabloheaf1708]

Thank you for your video, very helpful! I’d like to recommend the use of a tripod for hands free installation instruction.

[@StayHomeHack]

Yeah, I did not have a tripod at that time. I have one now. Thanks!

[@mezabros8311]

Thank you

[@StayHomeHack]

Welcome!

[@dazzlinglucy3203]

Thank you for the video! Got mine together but the resistance on even the lowest level is very tough to move. My wheel seems to be hitting the plastic part on the right side. Any suggestions?

[@StayHomeHack]

Hi Joe, it hard to understand what the problem is without looking at your bike or a video/picture. Anyway, I just posted a quick video (kzbin.info/www/bejne/fKDTn3qAjbOeg7s) to see if it can help you. Please don't hesitate to contact their customer service if you cannot solve the problem 😀

[@NightStars1122]

Now you have the bike for a while, how do you like it. I have been shopping around for an exercise bike, I don't know if I should get a "regular" exercise bike or a "smart" one.

[@StayHomeHack]

Thanks for asking, but I don't do recommendation for what to buy, sorry. Regarding my bike, it looks kinda old now, but still runs smoothly and quietly.

[@santiagocamacho900]

Hey thanks for the video, but Do you know what the black rubber block is for?

[@StayHomeHack]

I think it is similar to the tube/cylinder that is not part of the bike, protecting the wheel from being damaged during the shipping.

[@waltb7707]

Very good video man thanks 👍

[@thewillofsaga8269]

Can you tell me more about the display pad? Can you reset per ride or how many miles does it go before resetting? I just set mine up today!

[@StayHomeHack]

Yup, the TIME and DISTANCE get reset after each ride. The ODOMETER (total mileage) continues to go up until it hits 999.9 or runs out of battery. Enjoy!

[@thewillofsaga8269]

@@StayHomeHack Thanks, you're the best!

[@pharos88]

hi, i have bike like one in the video, but i need to disassembly crank arm to be recrewed hub after wear of pedal threading. how could i do that?

[@StayHomeHack]

I have never actually done that before, but it doesn't seem to be an easy job. Anyway, you can watch this video and its linked videos to see if it helps: kzbin.info/www/bejne/mYHQiqmPns5nmbs

[@cierarenae8881]

❤ nice video

[@tamies03]

Great video. Can you show how to hook up the small monitor that came with the bike ? We lost our manual and don’t know where the wire from the monitor connects to the bike?. It looks like at the front stem and flywheel area but we don’t see a place for it on the bike. Iwish there was a way to post a picture of what I’m talking about.

[@StayHomeHack]

Sure, will make video with more details about that.

[@StayHomeHack]

Please check this out for details regarding the wiring of the LCD monitor: kzbin.info/www/bejne/lWmmipKin7Kei8k. BTW, if your monitor has problems after installation, please contact the seller's customer service. Take a look at the last part of the new video, which shows a KZbin user's experience of doing that.

[@irwanrahim3826]

Hi. May i know where the sensor wire originally from. Mine was pull off by kids and i dont where its originated. Need to reattach it but dont know where. Thanks in advance

[@StayHomeHack]

Please watch this video to see if it can help you: kzbin.info/www/bejne/lWmmipKin7Kei8k

[@teelivingforchrist2855]

Very helpful

[@gpd19]

Hi, I'm trying to insert the handle bar such as at time 8:49, but the handle bar won't go down at all.....please help.

[@StayHomeHack]

The handle bar should fit and go down easily as you can see from my video. If not, then you should contact the seller for replacement: [e-mail]. I got this email address from the pinned comments in this video: kzbin.info/www/bejne/gHbWZpqFhst7h6M

[@gpd19]

@@StayHomeHack Thank you for the quick reply. I tried the next day, by using my body weight to push the handle down, and it worked...I guess my arm/hand is not as strong as yours! 😁

[@bananagurl27]

Thanks for the video! Do you know how to connect an App like Zwift or an iPad?

[@StayHomeHack]

I don't, but it seems to be an interesting project to try though 😊. Here are a few related online articles as a FYI: 1) zwiftinsider.com/spin-bike-test 2) zwiftinsider.com/getting-on-zwift-cycling 3) cyclefromhome.com/best-spin-bikes-to-use-with-zwift

[@saeedtheman]

THANK YOU AMAZING VIDEO

[@StayHomeHack]

Glad you liked it!

[@mamabravo100]

Love my bike. By the resistance is so strong i can barely pedal. anyway to fix this problem?

[@StayHomeHack]

There was a similar problem asked by someone else. You may want to check if it is the same issue: kzbin.info/www/bejne/fKDTn3qAjbOeg7s.

[@mairarodriguez7811]

Thank you 😊

[@StayHomeHack]

You're welcome 😊

[@carolinedevault6397]

Any idea how to contact customer service for this bike? Needing a new crank and bike pedal!

[@StayHomeHack]

It is [e-mail] per pinned comments from my other video: kzbin.info/www/bejne/gHbWZpqFhst7h6M

[@mercedesgreen6880]

What wrench’s did you use ?

[@StayHomeHack]

I used the wrenches came with the package. You can see them in the video at 0:35.

[@gijane2cantwaittoseeyou203]

2:17 The hardest part. I want to send it back but I destroyed the packaging to open this shit

[@BigBruh100]

u the man big dawg ✊🏽

[@StayHomeHack]

Thanks!

[@JT-st9yj]

Is this bike still working and functioning well after two years of use?

[@StayHomeHack]

Yup, it is getting an older look, but still works fine so far 😊

[@JT-st9yj]

@@StayHomeHack Great, thanks for the update!

[@raisafaiz4319]

I have same cycle but assembled by someone else.. the left handle of the pedal , you know the one where you attached the pedal.. it came off.. the left one.. how to attach that.. please help

[@StayHomeHack]

Thanks for the question! I just looked at mine and it seems that the left pedal handle is going to come off too. I'll find out if I can fix it in the coming weekend...

[@StayHomeHack]

False alarm from my previous comment. After a closer look, my bike's crank arm (pedal handle) has no problems. Please watch this new video to see if you can get an idea for how to fix it: kzbin.info/www/bejne/mYHQiqmPns5nmbs. Please contact the DMASUN customer service if you cannot solve the problem.

[@angryzellers]

Any idea on how to switch the console from ML (Miles) to KM (Kilometers)?

[@StayHomeHack]

Unfortunately, I don't see an option to do that. Since 1mi = 1.61km, if you like to ride 10km/day, then it is 6.1mi/day.

[@adriankschan94]

Hey, does it say where this bike is manufactured?

[@StayHomeHack]

I don't see such info on the bike or the manual.

[@PatrickBateman191]

I want to buy one, do you recommend ? Thank you !

[@StayHomeHack]

Sorry for the late reply, but I don't do purchase recommendations. I created and shared this video because I think it might help those who do not have the instructions in the package. Thanks for asking anyway. You may want to look at Amazon reviews for recommendations 😊

[@laurenb650]

Very helpful!

[@StayHomeHack]

So glad!

[@lifewithalma8461]

Sooooo helpful!

[@StayHomeHack]

Glad you think so!

[@asiatic1979]

Hi, I just put the bike together but I’m having issues with the monitor. It doesn’t seem to work

[@StayHomeHack]

If the monitor does not display anything at all, please check if the batteries are inserted with the positive and negative poles in the correct directions. If the display works, but the numbers are wrong or not changing, then check if the pulse wire and the sensor line are connected to the monitor correctly -- see my video at 11:38. If you still cannot solve the problem, you may want to contact their customer service. Good luck!

[@menelik83]

I’m having the same problem. Did you manage to fix this?

[@lejimenez70]

Thank you was stuck on the seat

[@jazzysway7775]

Is the seat comfortable?

[@StayHomeHack]

It is fine for me after adjusting its position. You can see that in the video at 6:15. Using a bike seat cushion can help too.

[@cheffjeff5908]

Would this bike be good for someone who is 6'3

[@StayHomeHack]

Hmm, I cannot tell as I am a bit under 6'. You can find some Amazon reviews from people who are above 6' here: smile.amazon.com/DMASUN-Exercise-Cycling-Stationary-Comfortable/product-reviews/B07X6GHLLT/ref=cm_cr_arp_d_viewopt_kywd?filterByKeyword=tall

[@lbrady-sq8gb]

Will this bike fit in suv?

[@StayHomeHack]

I think so. You may want to remove the handlebar and the seat if it is assembled already.

[@ARMY-STAY-MOA-875]

ياخي الدراجه نفسها لا تعمل الخاصه بالاقدام انها لا تتحرك

[@giants416]

Mine came missing pedals…

[@StayHomeHack]

Sorry to hear that. Hope you have already contacted their customer service to get the missing parts.

[@atos94]

Bike was good for a few weeks then developed a very bad ticking noise when in use. Also the sensor handles started forming cracks just a few weeks in. Not impressed especially for the price.

[@StayHomeHack]

I am sorry to hear that your bike has problems. I would suggest you to contact their customer service, which is responsive AFAIK. This is what they promised on their Amazon's product site: "We provide the customers a 12-month parts replacement and your concerns are answered within 12 hours."

[@atos94]

@@StayHomeHack thanks I have sent an email

[@gijane2cantwaittoseeyou203]

Whoever made the packaging is an idiot. I had to destroy it to get the product out

[@xilio3224]

POV u just got ur bike and ur confused on how to put it in all together

[@nunuvixensgirltalk9383]

Thank you so so so so much! I would have never been able to put this together. Mine is a little made different but everything you showed worked completely the same putting together. So once again thank you. 🤍

[@StefanGenov7]

Thank you 👍