assembly of tao pony 49cc scooter

[@chrishmiller4534]

Thank you sir! I bought a Pony last week, followed your vid (props to your camera people!) and today I’m on the road. Everything came together perfectly. You’ve done the Lord’s work here my friend!

[@LilsetaRackz]

How fast does it go ?

[@bb-us4ew]

I'm not buying the tao tao pony 50 but this video is a good guideline for unpacking and assembling chinese scooters thank you

[@morecool4u]

You are welcome

[@livinincalifornia]

I just figured out why my front fender keeps rubbing and now I can fix it. Thank you!!!

[@morecool4u]

You are welcome

[@Prittyboy203Gaming]

Very detailed definitely knows these bikes great vid 👍😊

[@morecool4u]

Hey thanks yeah I should know these things I've only been putting

[@morecool4u]

Then together now for about 8 years I've been to main mechanic for a scooter shop here in Indy for most of that time

[@ballistik_coffee_boy]

Thanks ! Always nice to refer to when I get lost with my tao tao scooters

[@debeeriz]

Before starting do an oil change, with some decent oil to run it in, who knows what oil they use, there is no filter so decent oil and regular changes will help you get your bike to where you actually wear out the tyres

[@bb-us4ew]

Someone also said change the gear oil too

[@tylerescobar159]

There is an oil filter on the drain plug for the engine oil

[@debeeriz]

@@tylerescobar159 not really a fllter, more like a strainer, a filter you replace after x amount of miles, a strainer you clean

[@tylerescobar159]

@@debeeriz ok yea true

[@morecool4u]

I recommend to ride the bike for approximately 75-100 miles with the motor oil it is shipped with in order to properly break it in. Afterwards I recommend a high performance motorcycle oil that has no synthetic in it either 10w 30 or 10w 40 grade and then every 700-1000 miles after that.

[@ravensb-more5234]

Just by watching him I got my scooter on road

[@Chadsolderbrotherbrad1111]

I ordered mine assembled and tested 😂

[@morecool4u]

If this video was helpful to you please subscribe

[@davemarx7856]

Can I ask why you increased the idle RPM for 5 minutes?

[@LonnieMinton-u1k]

Looking good bub keep it nice work thsts bad ass

[@bobd1545]

Awesome video. I just assembled mine, and a circuit part is loose with some loose wires. Customer support is of no help as they don’t answer the call and didn’t return to my voice message. Any video explaining the appropriate wiring attachments for this product? Thanx

[@acethedon-p2q]

Where did you order yours ?

[@jodie4609]

What are all the hoses,please . I have a leak in that area thank you awesome video

[@toddclark5154]

thank you for making this video!

[@Dailydoseofdedication]

Which tools do you need to assemble this moped?

[@LonnieMinton-u1k]

Right there if u change you’re clutch it we’ll make it go faster sound good bub bad ass

[@JohnWick-yv6bu]

Great video thanks so much

[@AllLifethingschannelyt]

I have the icebear rocket 50cc scooter it's same frame model

[@r.r.hughes9808]

Do you know how I would align the handlebars with the front wheel? when I am going straight the handlebars are slightly to the right.

[@AlfredClifford-y5t]

Do scooters take oil and what kind

[@Retiredatlast65]

Hook up positive first, then negative terminal.

[@willarddevoe5893]

What kind of brake fluid do the brakes take?

[@mr.heineken5770]

DOT 4

[@annesummers09]

I bought a TaoTao 49cc scooter from a drop-ship company in the midwest 6 years ago. I never received a Certificate of Origin. I haven't been able to license it because of this. What can I do? I tried contacting them when I first bought it, but they refused to answer my phone calls or emails.

[@slida65]

That really sucks . You can try to do it through Vermont DMV.

[@bb-us4ew]

You will have to do a lost title just give the DMV the Vin or frame number off the scooter

[@Drumseto]

Man my Tao Tao shutdown when I turned on. It some kind of cold start + lost power when Im riding. After a wild goes normal but the shutdown has me annoyed a couple of times

[@sharonmckinley2130]

Do you have to pre charge the battery?

[@akelaambee6346]

As he says in video it's good to top it off

[@dantickle5562]

What carb idle did you set after the 5min running

[@scooterman7098]

He'll never tell

[@123peewizzy]

thank youuuuuu I just ordered one

[@rev402]

Thanks, this should be helpful. Sadly, mine didn't seem to come with that bag full of parts nor the CD that was under the seat. I wasn't sure where things were, then I started to watch your video and when I saw you open that I thought I found a treasure trove until I went out and opened mine and just found the mirrors and owner's manual. So, I guess I just sit and wait until they send me the rest.

[@crowmusicbooking-u3g]

Will i need to buy oil for it?

[@charredskeleton]

Yes you need oil. If you want it to last the oil it ships with should not be ran. 15w40 diesel engine oil works great in these.

[@jbeatrizzz9088]

What axle is being used for the front wheel? Is it a 12mm or 15mm?

[@AlfredClifford-y5t]

Do scooters take Oil

[@Storyswitwoop]

My handle bars are not aligned with the front tier is there anyway you can help with that

[@LonnieMinton-u1k]

Better check your oil on them and alway start them every now and then thums up my new frieand bad ass

[@jaylinscringe9099]

My scooter is messed up and I don't know where the air hoses go for my filter and there's a tube in the gas filter idk where that goes

[@viosog9661]

What is the price of the parts for the E5

[@LonnieMinton-u1k]

Can u guys have it already put to geather

[@fredcabor5258]

Where can you buy a kit

[@viosog9661]

Euro 5?

[@LonnieMinton-u1k]

Put some lights on it in your tears on the bottem then put u a mp three player on it and some speacker on it then u be seat

[@scrambler69-xk3kv]

It is real important that you stop twisting an flopping that steering head assembly around like you are, You are going to create all kinds of electrical issues.

[@LonnieMinton-u1k]

Holler at youen latter bad ass guys

[@josemayor3223]

Why does he show the parts to the people and not the camera 🙄

[@kevinmoore342]

Do you sell body parts?

[@morecool4u]

No

[@adamr-4343]

Is this scooter being built at Harbor Fright? Lol

[@bb-us4ew]

Some harbor freight s sell them I think after all it's a Chinese tool store so why not

[@appsunder-ground2524]

I know you've put probably a hundreds of these things together but why you just slamming and throwing s*** all over the place I mean I'm an auto body mechanic and I don't even do that by the time you get done with it it's going to have micro scratches on it you're going to have to polish that that's more work

[@morecool4u]

The body panels on these scooters is a cheap plastic the Chinese fail to clean the injection molding equipment that produces these properly there are many imperfections and dimples on the plastic I assure you that the amount of handling I did and the way that I did it left no visible marks at all.

[@LonnieMinton-u1k]

Killer that’s bad ass lick the Horne hot have my Horne what about alearm systeam

[@LonnieMinton-u1k]

Lick to have it take 5.00.00 hurndread for it right now

[@patrickshannon4516]

Don't buy one these scooters they are weak and if you want something with a little more power go with a Yamaha Zuma 49cc will blow this thing away.

[@tylerescobar159]

You are being way to rough with it and all this extra stuff is pointless I also assemble these things and I feel your doing it completely wrong in some places