ASUS EeePC 1015PEB laptop netbook take apart video, disassemble, how to open disassembly

[@shmoto]

A giant thank you for posting this! Gave me the confidence to rip the sucker apart and replace a broken fan successfully.

[@regazzz]

Depends on what type of experience, replacing whole board with USB port on the right side of this model of a laptop.

[@unit0007]

Seeing you stuggle with getting the trackpad off, made me feel better about myself. =)

[@primoz990]

Thank you. This video saved me a lot time to disassemble this little eee bastard :D

[@regazzz]

That's great!

[@regazzz]

Thank you very much for such a valuable comment!

[@hammy434]

hey, you know the black tape you peeled off the hdd at 8:40 in the video. well if you put a new hdd to you have to put that on it? cause i upgraded the hdd on one very similar to yours (mines a 1015px) and whenever i tilted it i heard like a grinding noise. im not sure whether it was the hdd that was broken or something else. the sound was similar to when you put a cd in a laptop and then move it. if i tilted the laptop quickly the hard drive would stop and make a beep sound. thats not normal. but i just want to know is that due to not having the black tape or is it because of a bad hdd. the hdd i added to it was higher rpm (7200rpm) than the previous (5400rpm). thanks.

[@regazzz]

Hello, I would say it not a must, but better to do same as original genuine manufacturer. As they do something for a reason.

[@regazzz]

(sorry for late comment) I hope you was able to unscrew them. If the screw head get's damaged it can be pain in a butt to remove it. You may buy a screw extruder, smallest possible to try it first. If this will not help, you may use a drill to carefully drill it out. With both tools you need to be very careful, because drill (especially drill bit) can damage plastic pretty bad.

[@suyahatesntr]

You still alive bro? Just wanna thank you 🙏

[@regazzz]

@@suyahatesntr all good and alive! Thank you for support! I am glad this video helped!!!

[@regazzz]

depends where laptop coming from. Some people have cats who like to sit close or even on top of it. You can try a compressed air, just try to not spin fan very fast, some people was braking it by doing this. But if there is a really good amount of dust inside, compressed air will probably not help. Good luck!

[@regazzz]

I can't tell exactly but it was some husky set with a really thin bits.

[@blackhupia]

thanx man it helped me a lot. yeah you probably could do it faster but still it's fine. the ONLY ONE video that really helped me (I posses seashell series asus netbook)

[@regazzz]

Cool! I am glad this video helped you out!

[@botasfinas]

Thank you for this video. Without him there would have been able to. I changed the hard drive, but I have not put plastic down. Is it necessary to do

[@JoaquinPro64]

Sorry for really late comment but what type is the cmos battery because i have to change

[@regazzz]

No problem, I would suggest to simply get on eBay and search there for something like "asus 1015peb cmos battery" That would give you the best results. Thank you!

[@Wilku3d]

Does anyone know what thickness is the thermopad in this EeePC? Many thanks!

[@regazzz]

Can't turn on - look at the power button first. If it is not connected - can be a reason.

[@ISMELLNOOBCAKE]

i cant get the screws off where the batteries are, tried using the smallest screw driver i got. any suggestions

[@pst9821]

I got a ssd, any advice on how to put it inside it and move my os and data onto it in a little time

[@regazzz]

I would recommend a fresh windows 10 install rather than clone, Make sure you have your license for win 10. After install, plug in your old hdd externally via USB and and adapter and copy your files.Watch a few videos on KZbin. Hope it helps!

[@TheVidoegame]

What was the size of the screwdriver used to get out all the screws?

[@iguana563]

What kind of band you wore,is it for static proof?

[@regazzz]

Nah, I would not rely on it. The best would be one that is plugged into ground. Otherwise it makes no sense.

[@regazzz]

Good for you! You are welcome!

[@QuestionableStain]

Mmk I followed every step changed the hard drive and put it back together. Now it won't turn on. I know it isn't the hard drive's fault seeing a couple of vids how to change it . Any suggestions or any ideas?

[@regazzz]

You are very welcome!

[@davidmattock229]

I'm not being funny but this guy doesn't look like he 'knows' how to disassemble the unit he is just feeling his way through, I could do that if I too guessed each stage. This is not what I was hoping for

[@regazzz]

David Mattock Yes, you are right. Some times I take laptops apart for the first time. But still, many people likes my videos :) I hope it was at least a bit helpful for you.Anyway, thanks for watching!

Thank you regazzz! Excelent how to!

[@regazzz]

Rogério A. Matos You are welcome!

[@to0muchfreetime]

Thanks a lot. This was super helpful.

[@stephanlindauer]

foreign keyboard might have more screws underneath the touchpad. try removing that first if keyboard seems hard to loosen.

[@stephanlindauer]

foreign in my case is a german keyboard layout...

[@regazzz]

Thanks for let people know! It will be useful. (I can also imagine that there was no screw at the start in a laptop I took apart.)

[@botasfinas]

Gracias por este vídeo. Sin él no habría sido capaz de hacerlo

[@regazzz]

I can't tell where controller is! Have a good luck!

[@Chicago48]

What are the tools he's using to disassemble?

[@regazzz]

I guess it has only one access. Removing a palmrest.

[@alexajna]

This video is very helpful. Thanks a lot yo!

[@romabasttos3876]

Thank you! 🙏🏾

[@SophieMackey-ls4mh]

Can anyone tell me if this model uses the 2.5mm/0.7mm or 2.3mm/0.7mm power source? Thank you.

[@regazzz]

Can't say exactly, but if you are talking regarding a charger and it's plug, I would suggest to search for used chargers on eBay to find a correct charger

[@DE-ey9lb]

Thank you! Thank you! Thank you!

[@regazzz]

You are welcome!

[@regazzz]

GREAT!!! You are very welcome!!!

[@regazzz]

You are welcome!

[@regazzz]

Thank you too!

[@simon5582]

nice! thanks you

[@PaoloDiNocera]

how many inch is Hdd? connector?

[@Gazinbali]

Yeeks !!! If I tried this I would have at least 6 - 8 screws left over.. I was checking to see about the Speaker placement.. as my Eepc was putting out horrible sound.. turns out it had picked up a mini staple.. and was stuck to speaker magnet.. now aok.. no surgery required :)

[@anilkhnadekar3032]

Thanks dost

[@regazzz]

It is should be fine...

[@jenshpark9896]

Battery's Name ??

[@regazzz]

and I like your channel name :)))))))))

[@inmorthex]

thanx man!

[@regazzz]

I didn't tell that there is no value. I am fine with that. People are different and can have absolutely opposite point of view.

[@abitofpc6611]

"If you are taking your ASUS EeePC 1015PEB laptop netbook apart be careful and wear an anti-static wrist band..." Why? You did not. LMAO. An anti-static wrist band does NOTHING if it is not connected to a ground.

[@regazzz]

+A Bit of PC isn't that obvious?

[@drozdovnik]

Спасибо, помогло разобрать

[@ke6ziu]

I hope, for your sake, you didn't use that drill to put this back together...

[@regazzz]

Lately I use my wireless screwdriver only on some external case bottom screws. So, this video was made a few years ago and only one way.

[@ke6ziu]

+regazzz Good... I say that, because I've had supervisors that would have a conniption fit if you used that to reassemble a computer. We had a guy that would over torque the mounting screws, and would damage the mobo...

[@abdellahbentahir8766]

C'est du tâtonnement. Pas professionnel du tout.😢

[@regazzz]

It was also filmed more than 10 years ago when no videos like that were even available on KZbin. Usually people forget about it but that's ok. Yes, it is mostly trial and error because I mostly film laptops I take apart for the first time, otherwise, after a few similar laptops you know exactly what to do. Meanwhile, it isn't my main income, so, I can't find 5 same laptops for training to make a perfect video for people who think I am "not professional". I hope this video helped at least partially. Thank you!

[@likeZOMGlmfao]

This video is so useless, I can't even see where all the screws are and he's saying nothing...

[@regazzz]

What I can tell - do a better one! :)