ASUS GPU TWEAK III Full Guide and best settings

[@JULVEXGAMING]

Thanks for watching! If you find it helpful and you want to support the channel consider subscribing and help me reach 3000 subscribers

[@Pinkfloyd1173]

Thank you for this video man. Really helped me out.

[@JULVEXGAMING]

Glad to hear it was helpful!

[@reekwind1294]

Very good and informative video! Perfect for me as a careful newbee.

[@JULVEXGAMING]

Thanks! Glad you found it helpful

[@pete9b]

Thank you for sharing, very clear and informative video.

[@JULVEXGAMING]

Glad you found it helpful

[@RogerEngland]

It could have been a great video. Unfortunately, as soon as you changed the color to green, your viewers can no longer read the interface. You should redo this video, as I think you did a great job in walking throught it.

[@JULVEXGAMING]

Thank you for the nice words and especially for the suggestions

[@15_nick78]

Do you have an idea why the 0db mode isn't displayed for me (I have a 1660 Super)

[@JULVEXGAMING]

If I’m not wrong for that GPU the GPU Tweak doesn’t support the 0dB functionality

[@ViggenStory]

God bless you for making this video!!!

[@JULVEXGAMING]

Thank you for the nice words, happy that you found it helpful

[@ViggenStory]

@@JULVEXGAMING it’s the best one yet, picked up a Rog strix 3080 TI. All the other videos weren’t very helpful. Cheers mate

[@Brutell01]

Can the GPU TWEAK show fps in games like MSI afterburner?

[@JULVEXGAMING]

Yes, you have to click OSD on the main menu

[@Cobra206]

7:00 to 7:30 you are wrong, this applies to a specific situation and not to every graphics card. I think you also need a power supply with a 12VHPWR connector.

[@JULVEXGAMING]

Yes, because not every Asus GPU has that LED; I was testing this with a RTX 30 series (3090 in specific), that has 3x8pin connectors so you don’t need a 12VHPWR connector

[@ronvarka644]

Hello, I want to set a temperature limit for the video card, but my settings are not saved after a reboot. Is it possible to somehow preserve them or limit the temperature in another way?

[@JULVEXGAMING]

One way is to create a profile and set the temp, keep in mind that you should enable the app to start with windows to be able to apply that Also, if you go n settings be sure to enable or disable the flag on "allow previous settings on program startup" - depending on your case use

[@R1316B]

Thanks Alot!

[@JULVEXGAMING]

glad you found it helpful!

[@simongardner3429]

Hi, thanks for the informative video. Question. I entered 3840 x 2160 (4K) intro Tweak 3 because that is why the capability of my monitor and graphics card etc. However, it keeps reverting to 1080 HD resolution. The monitor is set for 4 K and the Nivida app shows this too. Any suggestions?

[@JULVEXGAMING]

Hi, thanks! I guess you're referring about the resolution in the OSD sub-menu; I tried with my monitor which is 4k too and didn't notice this issue. I would suggest you to install the last version which is the 1.5.4.9 they might have correct it, give it a try other than that if your resolution - in windows and Nvidia panel is 3840x2160 there is no reason for the app to revert back into 1920x1080; keep in mind also that you have to click on 'save' once you change the resolution otherwise won't work

[@Pinkfloyd1173]

You know what would be cool to do, would be a undervoilting tutorial vid. I cant figure it out on this Asus software?? Thanks again.

[@JULVEXGAMING]

Sure, I'm testing it and sure might be a tutorial video about it; even I have to admit that is a little bit inconsistent but still working ok. You can find in the clock tab click on "VF Tuner". It is similar to MSI Afterburber undervolting (if you have ever use it) 👉 check here for more: kzbin.info/www/bejne/m52Ud4iPjdl1ZrM

[@ColderPls]

Doesn't have on/off hotkey ???

[@JULVEXGAMING]

Yes it does, if you go into the OSD submenu you can find it there

[@arunachalama8147]

can anyone explain while playing games my fps is going down in asus tuf rtx 3060 is this gpu tweak will help ? and alos explain about this why for this gpu tweak is

[@ikerfater]

I wonder why I dont have that 0db fan and power detect? it only appears OSD for me.

[@JULVEXGAMING]

Try to update to the last version also not all the ASUS GPUs have the 0dB function

[@ikerfater]

@@JULVEXGAMING ohh already did and still nothing and I'm using TUF RTX 3060

[@JULVEXGAMING]

@@ikerfater I’m not sure if the TUF 3060 has the 0dB feature

[@adaeptzulander2928]

Can't get OSD to work at all. Must be missing some setting.

[@JULVEXGAMING]

You should try to update the app (if isn't the last version), otherwise I would suggest to reinstall the app

[@adaeptzulander2928]

@@JULVEXGAMING I had the latest version. Something else must be interfering with the OSD. Can't begin to figure out what it would be.

[@Uglykidcid808]

How do you set this up for water cooling? The software is constantly looking for fans that are not there.

[@JULVEXGAMING]

I didn't use it in water cooling yet, I've only tried in a GPU with AIO; you might ignore that error I believe this isn't meant for custom watercooling (at least not yet)

[@11app__]

My average fps was at about 240, but it dropped to like 30 when I downloaded this... please help

[@JULVEXGAMING]

That's weird, I didn't have any issue, I would suggest to check if there is any update and also try to update the GPU drivers

[@TheMuffinManx3]

Hi, how do you turn off the 0db mode? 4090 here.

[@JULVEXGAMING]

Hi, just click on the slider "0dB fan" that should enable/disable the 0dB fan option

[@Not_Afraid78]

Hi (: I have a question about asus gpu tweak III. So, I have a tuf gaming laptop fx506lhb. Can I overclock my gpu (gtx 1650 gddr6) with this program (gpu tweak iii) ? Will be there any problem? Thanks for any help (:😊

[@JULVEXGAMING]

Should work but since it is a mobile GPU some settings might be limited

[@jasperlardera8724]

Hi Guys i cant uninstall GPU TWEAK 2 cant find in control panel uninstall program

[@djected__]

20:01 😂😂😂 "this shouldn't be here, shouldn't be on the internet in my opinion". I'm about to uninstall just from that 😂😂

[@lukeshore6124]

hi does anyone know if after gpu tweak has loaded and overcloked can i close the app? and will it keep the overclock

[@JULVEXGAMING]

Hello there, unfortunately you can't close the app but you can minimize so won't disturb; but generally none of this kind apps you have to run them on the background so they can apply the settings

[@gingerbread2839]

omg oc scanner took forever to finish it, dude u should of mentioned it

[@dreamyh1z1]

I need to have the software open while I am playing for the OC work?

[@JULVEXGAMING]

Yes, it should run - also minimized - for the OC to be applied

[@srnetoon]

i cant enable the monitor osd in a game...

[@JULVEXGAMING]

you should try enable it before starting a game

[@srnetoon]

@@JULVEXGAMING i do it, its enable, but doest appears

[@JULVEXGAMING]

@@srnetoon you should go in the OSD sub-menu and enable 'monitoring data' keep in mind that the anticheat system certain games might consider it as a strange behavior and won't appear on screen

[@GreatMossWater]

​@@JULVEXGAMING I also can't see the monitor osd even though the 'OSD' and 'monitoring data' buttons are enabled, only preview works. EDIT: forget what I said, it does works, it just only appears when you are in a game. Thought it was broken since the OSD never appeared in Windows. It seems to be overlayed in the game window itself.

[@Dreddpool82]

I can't get the OSD to work, I press the shortcut key when I'm in game and nothing is appearing on screen.

[@JULVEXGAMING]

weird, maybe there is a combo of FN button for activating extra keyboard shortcut

[@basedmonkey4558]

can i use this to stop fps drops ? and If so, how ? ive heard it has something to do with my memmory

[@JULVEXGAMING]

you can use that, but FPS drops doesn't have to do much with the memory - sure that depends also on how much memory you have; but I would suggest to check the overall settings of the GPU and power, and most importantly the games settings The ASUS GPU Tweak III, if you have an ASUS GPU, can help you with some settings but keep in mind that the fps drop depends on a lot of things and can't be always the GPU

[@jordy_indo45]

Can i use for Non-ASUS GPU ? my GPU [ MSI RTX 3090]

[@JULVEXGAMING]

I'm not sure if it is going to be fully recognized your MSI GPU but you can use MSI Afterburner, check out here how to: kzbin.info/www/bejne/kF7FiH6IqseJqZo

[@hehe-jg6tl]

why do i not have the 0db fan and power detect on the right side ? i only have the osd

[@JULVEXGAMING]

Hello there, that depends on your GPU - usually, the 30 series has the 0dB function. Eventually trying to reinstall the GPU Tweak III might be helpful

[@Oujry]

can you change the rgb colour of ur graphics card with this software?

[@JULVEXGAMING]

Unfortunately you can't, for that you have to use Armory Crate or other third-party RGB software - as Signal RGB or others

[@Oujry]

@@JULVEXGAMING I have armoury crate installed and it doesn't recognize my 1060 6gb rog strix I don't know how to get it working

[@Oujry]

@@JULVEXGAMING also my ods isnt working with tweek any idea why?

[@JULVEXGAMING]

@@Oujry I believe that GPU isn't supported by the GPU tweak III

[@Yamahaonboardmovies]

How can i switch to "Always 3D Clock" like GPU Tweak 2 ? Can't find on GPU Tweak 3 ?

[@JULVEXGAMING]

From what I can say they have moved the "Always 3D clock" in VF tuner; on the tab GPU Boost clock-click on VF Tuner and then click on driver profile (then apply), that should be the equivalent of "Always 3D Clock"

[@DevineDumbass]

I keep getting an "attempted unsupported operation" popup when just trying to set it to silent mode or anything else. Not really sure what I did wrong

[@JULVEXGAMING]

That’s weird, I wasn’t able to replicate it. I would suggest to reinstall it and check also the version of the Nvidia drivers

[@DigiBric]

OSD not show in all game... Why?

[@JULVEXGAMING]

Try to reinstall the app, as a second option move to OSD submenu and be sure that the flag 'monitoring data' is on

[@natthawat4790]

Help me pls In gpu tweak iii my max refresh rate is only 60hz but my monitor is 165hz what to do?

[@natthawat4790]

If using gpu tweak iii the refresh rate is back to 60hz i have to change in windows to 165hz every time i use gpu tweak iii

[@JULVEXGAMING]

@@natthawat4790 That's I tested I bit but didn't happened to my; be sure you have the last version of the GPU Tweak III and also check out the settings on Nvidia panel too

[@zeltix44]

Its also good for 970 gtx?

[@JULVEXGAMING]

I'm not sure that will be compatible

[@SalvatoreEscoti]

0db mode doesnt work at all!

[@s08z08]

Why i dont have 0db fan in the side and how i make zero fan noise

[@JULVEXGAMING]

The 0db fan depends on your graphic card, usually Asus has implemented it in almost all 30xx series. I would suggest to check if you have also the last version - should be 1.5.3.1, you can download it from here: www.asus.com/campaign/GPU-Tweak-III/ If you want to create your own profile for the fans check it on 13:25

[@s08z08]

@@JULVEXGAMING i have 2080ti turbo but with gpu tweak 2 i had normal fan i touch it and i installed tweak 3 but now the fan so noisy and nothing help

[@JULVEXGAMING]

@@s08z08 The 2080Ti doesn't have the 0dB fans if I'm not wrong, but you can create your own profile for the fans, otherwise if that won't work you might consider revert back to GPU Tweak II

[@lillen141]

Can you change the gpu rgb anywhere?

[@JULVEXGAMING]

for the RGB you have to use the Armoury crate software - (which I honestly don't recommend)

[@lillen141]

@@JULVEXGAMING yeah any other programs? Cause armoury crate dont detect my strix 4080. So i cant change color there. Cheers.

[@JULVEXGAMING]

@@lillen141 Signal RGB can help you with that, just check if your GPU is supported

[@lillen141]

@@JULVEXGAMING oki. Thx alot. 👍👍

[@V3cinu92]

Hi dude ! my computer restarting during Oc Scanner process . CPU: I9-10900F @ 2,80 GHz (20CPUs) GPU : RTX TUV Gaming 3070 8 gb RAM:32 GB MotherBoard : B560M-A PRO what can be the problem?he`s restaring every time ...after 1-2 hour

[@JULVEXGAMING]

Hey there! I would suggest you check out the temps during use when going through the OC scanner and close as many apps as you can, especially those that might use the GPU. You didn't mention your PSU but I guess is at least a 750w (hopefully a good one 🙌)

[@V3cinu92]

@@JULVEXGAMING Hi again . i just check PSU its Argus , max 720W (that can be the problem?) and about CPU,GPU temperature its not hinghter than 58 and if the PSU its the problem , please recomand one good to buy it !

[@JULVEXGAMING]

@@V3cinu92 Stay away from that PSU! I would highly recommend get a Corsair RM750Watts or a Seasonic 750w gold. You can find them for about 100$ (even less these days), I would highly recommend to NEVER be on a budget on the PSU

[@V3cinu92]

@@JULVEXGAMING thx for answer! i will order Seasonic 750w gold. i come back in few days whit info! thx again!

[@V3cinu92]

Hi , i`m back ....i change the PSU i did the OC Scanner and NO more RESTART ! GIVE TO THAT GUY A MEDAL! i will play 3-4 more hour to see if i get any restart ! thx a lot for your advice! ( P.S. my game Battle Filed 5 have a problem , the game it`s exit after the round it`s finish ...do you now what can be ? )

[@ThePolishJoker]

I Don't Have OSD in Games... Why 🤨It's Enabled of Course.

[@JULVEXGAMING]

With some games OSD might not work - some anticheat systems won’t let the OSD appear; if it is happening in all games you should double check the settings

[@ThePolishJoker]

@@JULVEXGAMING AntiCheat ? Just ReInstalled It and It Works ,,SomeTimes"

[@JULVEXGAMING]

@@ThePolishJoker yep, some games (eg. COD, FIFA23 and so on) have some anti cheat software integrated that sometimes can prevent the overlays or OSD to be shown Reinstalling might work

[@ThePolishJoker]

@@JULVEXGAMING It Works Only in Test Mode but Not in The Witcher 3 lol DX11, Not 12

[@erikhoel6081]

Its impossible to unistall this sh*t.

[@JULVEXGAMING]

Sometimes the uninstall process might be corrupted (unfortunately), but you can use some uninstaller app to do that

[@erikhoel6081]

@@JULVEXGAMING What about armoury crate? Is this unistall also corrupted? And what about EZ update, AURA? I have never seen a company that actually almost never insert the option of an unistall file. The worst is that most of asus' apps dont even show in the task manager progs under the logic .exe name. This leads me to believe that they try to hide their programs from being uninstalled. Why? I dont have a good conclusion for that yet. I can only imagine.

[@waynewilson3871]

Guys use your GPU stock is the best. To gain fps this way only gives max 10 fps at a great cost maybe shorten lifespan of GPU by 2 years over a longer OC period.

[@mrrod3004]

alot of us are under water and at lower temps even over clocked. my max 100% load 4090 and i9 12900k 100% load is 60c

[@peoplez129]

@@mrrod3004 Temp doesn't matter, voltage is the issue. It physically degrades circuits over time, atom by atom. The more voltage, the faster this process happens. Temps used to be the issue, but things have gotten soo micro that we've been beyond mere thermal breakdown for many years, it's all voltage and electrons stripping the physical material away now.

[@mrrod3004]

@peoplez129 over heating and high heat degrades. With the right temps you can rub 100 years on copper or gold. Voltage does not kill inkess its over volting and heating things up. I only have 10 years of experience with it rebuilding car modules and computers

[@peoplez129]

​@@mrrod3004 Voltage translate to energy. How much voltage does it take to char copper? A lot....think power line. That's why high heat can "age" copper, but that has more to do with voltage and oxidation than heat alone. If you took copper and left it in a closed room at 100c for 100 years straight, it would look exactly the same. If you took a blowtorch to it, it's not oxidizing because of the heat alone, it's because of the energy being put into it....i.e. like voltage.

[@RaDK012]

@@peoplez129 bruh we are talking about voltage of less than 12V at most, the voltage inside the graphics card are ridiculous to even think it can damage a component, the only issue is if there is no temp limit or thermal throlting, componant inside graphics card can melt (electric board melting, cable melting ect ...)

[@ainsleylisbeth1962]

🤦 Ｐｒⓞм𝕠𝕤𝐌

[@mutantbaby1672]

GPU Tweak III is a piece of junk. Eats up 30% of CPU cycles doing nothing.