ASUS TUF Gaming GT502 Build - Step by Step Guide

[@pavloslesi8928]

Honestly I've never subscribed so fast before, especially from the 1st video. This is the first ever video that I hit the like button since it is the most detailed pc building video, without the fake hype and just serious talk. Apart from the built and the whole outcome, which is beautiful, you gave great tips and instruction on software that for a first time pc builder, or even a more experienced one, could solve if not all, most of his problems. I sincerely salute this legend ! ♥

[@farandr]

This is probably one of the best PC building videos out there. Step by step, great knowledge and really good edition.

[@njb4319]

I’m a year late to the party, but I’m about to order this case for a build and I had a lot of questions about it. Your video is incredibly detailed and shows so much more than everyone else. And as a third generation Irish American, your accent is a joy to hear.

[@jorgeaaabr]

That's now the gold standard of build videos. Thanks a lot.

[@pandaemoniumplaza]

Finally, among plenty of videos reviewing this particular case, the only one that actually shows what this case is for is installing the CPU radiator in the back of the case

[@NomadGhost]

Dude ❤ thanks for the help here. I bought an all asus spec and I couldn't figure out some parts. Not even asus knew. Thank the gods you built a almost identical build.

[@MrVoayer]

Excellent walk through ! Great job ! Well done !!!

[@OFFCLMVRK]

Fantastic build video! Just built my first gaming PC using this video and your Hyperion case video (I tagged you on my IG of the final working build) since I decided to go with the Hyperion case, and it could not have gone smoother! Liked and subscribed thank you got the awesome videos 😁🤘🙏

[@nelsondasilva8119]

Thank you so much for this full demonstration !😁

[@MiseryBIeeds]

Your videos are the best tutorials on building. You're very thorough and leave the audience with zero confusion. I do have a question though. I have the same motherboard. I have two m.2. drives. You put your main in the bottom left, where would you put the second if you had one?

[@kellen4854]

Just any of the remaining three 4.0 slots

[@sheperdofthebrahs]

Very helpful, had this running while building in the same case

[@Spongyloam]

Another relaxing & clear build as always. Looking for a new case for a 4080 build some time in the future and they all seem to have 2 good points then at least one bad. I was sold on the NZXT H7 Elite- then i hear how loud it is I have a Helios now but it is also loud on my desk & a tad large. I hate not being able to clean the front fans easily, they are a bit brown and dusty 😷 I like the fish tank case look now for some reason, just the extra fans and cost that holds me off a bit.

[@admiralpiett]

I'd forgo at least 6 of those fans. The case is nice though.

[@Spongyloam]

@@admiralpiett Ended up ordering the NZXT H7 Flow RGB but now need weeks for the rest of the parts to be delivered- let's see

[@gimbleguy]

Thank you Chris for this Detailed video. Much appreciated. Liked!

[@NoFear1979]

14:50 Thanks for showing this. The manual was not to specific about that cable. 27:10 I take it the front logo rgb is connected to the same mobo connectors for a-rgb (3 pin 5 volt)? On top of that great video 👍

[@danilosgeko8888]

Hi, did you solve? How did you turn on the front logo led?

[@ivanrayes497]

Excelent video man! I´m about to change my rig and im doing a very similar build (but white) and your video is a massive help (pardon my awful english 😔)

[@t8ku2dc]

Such an awesome video. Almost finished my rig build thanks to you, BUT!! At 14:55 in the vid, can I plug this into my TUG TF120 ARGB fan's Controller box? There's a place for 2 pin cable. The fan manual says it's for the "Front IO button connector". (need to find a longer adaptor, 5'' is too short). Also if I get a second set of ARGB PC fans, would you recommend plug into the TF120s controller box instead of motherboard? The controller box like yours, has #4 slot available. Thanks, Christopher, you're AMAZING. OH, any reason not to use WIN10 rather than 11? Peace!

[@joeglennaz]

I really like that case. Hello from Phoenix Arizona!

[@lessdatesmoreonmyplates1457]

Do you actually need that many fans in the case? Like good god what would the 3x120mm fans even acomplish that are mounted on the back panel?!?

[@facepixel]

realy amazing soft skills , guys like you are rare

[@joshuapowell7792]

I’m trying to put the exact same fan in the back for exhaust like you did at 23:10, but it’s super tight! I’m afraid something is going to break on the motherboard from how tight it is 😅

[@tvandever2010]

Excellant Job! Loved this video.

[@RayzTvT]

I seen the shorter video and was wondering how the gpu was connected. Might be using this case for my next build.

[@hectortejada6546]

Muy completo, muchas gracias por tomarte el tiempo en hacer cada detalle.

[@danielscemo]

14:40 rgb case tuf

[@rnclucas]

I´m such a FAN... of this case and i bet there´s a lot of FAN´s out there too.😁😁😁

[@smamas114]

I have white version and its hard to put AIO on the top-side because will be lot of cables there , that was the reason for buying this case so for me wasn't enough space the also because radiator was too thick!!

[@arvindk2311]

The GPU fans are pushing air sideways, and the case fan seems to be intake the air from outside. Doesnt this restrict the proper and smooth airflow? as they both are pushing air at each other

[@Vecchete]

I thought the same

[@hsngn]

Amazing Job dude. well done.

[@dizzeeg7528]

I got a 502 in white and dint get a separate Power and Sw cable it was all in one plug.

[@ChristopherFlannigan]

That's even better

[@jensdeblock1691]

@@ChristopherFlannigan not really i got 2x Reset SW so i don't know which one is the power sw ... how can you tell them apart? only by trying out..?

[@smamas114]

Is it going to fit 2x 140 mm fans at the bottom ??!!

[@Sveca-x1b]

How to lit Asus logo on the front of the case?

[@mendesfilho]

I whould like to know too!!!!

[@tragic_solitude7992]

So the bottom fans arw intake and the rest outake?

[@NoFear1979]

Really nice that you show the small details of where to put different cables on the motherboard etc. I have one question thou. Is one a-rgb cable connected to the motherboard enough to provide for all the rgb fans via the controller? Thank you 👍

[@smamas114]

Can i connect the case front led to an MSI motherboard ??

[@SIRCOSMONAUT]

Just a quick question. How did you manage to fit the 200mm riser cable? I am currently trying to install a 200mm riser cable from cooler master but no matter what I try it seems to be way too long. It ends up in de fans below If I dont fold it at least 2 times.

[@smamas114]

Is the RGB case cable work with MSI motherboard ? i want to make the front logo to light up

[@djp8795]

If my mother board isn’t glowing even when pc is powered off does it mean my mother board is broken? I’ve had this for only a couple month and finally cleaned my computer for the first time by just now dusting it. I powered the pc on and it turned off like 2min later and won’t turn on at all. I’ve looked up EVERYTHING. I troubleshooted the whole pc. I tested my power supply with the paper clip trick and the pins that connect to the motherboard on the pier supply cable. Nothing. But I realized the lights to the motherboard aren’t even goofing anymore. Even when the PSU is on. The motherboard doesn’t flow like it use to when it’s off. I don’t want to order another MB unless I’m sure this is the issue. What would you recommend ?? If the motherboard is broke, would it be glowing when the pc is off or would it be blacked out like mine currently is?

[@chawk2251]

Where would I put reverse blade fans in this case? Bottom?

[@trevorroberts9539]

Excellent comprehensive explanations! Thanks!

[@mikeylad9924]

Is there a way to change the colour of the logo on the front of the case without the addressable LED strip?

[@shubhamgoyal5129]

i have the gt502 case but i am unable to connect the case argb cable to my motherboard because it has a male connector so can you tell how to you connect the case argb cable to motherboard??

[@djp8795]

Does this motherboard have Bluetooth? I can’t find it anywhere and maybe I’m just not googling the crest question.

[@alpha416game3]

Hi i just built my pc with this case i have both lian li sl120 inf and strimmer V2 i only have 2 usb on my mobo so i bought nzxt usb hub. But i cant seem to control the fans and strimmer using l3 connect

[@robin59977]

hello, the TUF rgb logo in the front does not turn on, the only unconnected cable is a 2 pin but on the motherboard the RGB header is 4 pin and the ARGB header is 3 pin. In the manual there is not this information

[@danilosgeko8888]

Hi, did you solve?

[@robin59977]

@@danilosgeko8888 yes, the TUF logo ARGB cable is hidden under the others. i had not seen it. Look closely at minute 9:44 you can see it next to the cable for the usb ports at the top towards the right. Follow christopher's finger casually pointing in the direction

[@rezkyrivaldo6369]

The fan 6 intake and 7 exhaust?

[@сергейиванов-л8л1т]

What length riser cable did you use?

[@CraziVulture]

LIAN LI PW-PCI-420 Premium PCI-E 16X 4.0 Black Extender Riser Cable

[@andrasdr.szekely8239]

I got the same case and there is a button on the front that is supposed to control the lighting. Mine is wired to the motherboard, but it does nothing. What are your thoughts on that? Thank you!

[@gotivanmomak]

Are u satisfied with airflow in this case? Asus GT502 TUF GAMING

[@nasr826]

شرح روعه جدآ ممكن مخطط دخول وخروج الهواء من المراوح

[@onurkoc3179]

Will it be a problem in the future if the video card is installed that way?

[@tristanmarcnavarro615]

41:37 Does it still work with USB Flash Drive for BIOS?

[@veniall1318]

I have the same case in white but I don’t see a reset switch

[@HasibUnveiled]

Unfortunately the king seating behind. The coolermaster haf 700 evo

[@thunderbird5197]

Do you can put an Atx power supply in, becuse I'm lucking for the white version and I'm will make an ful white build with the AERO Rtx 4070Ti.

[@azorean88]

This video was going good until the header on my board has 4 pins and the case conector has 3. Than came the fans, since i bought the tuf fans, shit did bit the fans... Any way, thanks.

[@thomasenright5282]

Motherboard is Asus Rog Crosshair VIII Dark Hero.

[@videogamesruinedmylife3769]

where would i put a sata ssd?

[@eycoregamer7143]

It is a nice case!

[@ChristopherFlannigan]

It has lots of good features

[@_CloseR_]

@ChristopherFlannigan Can I install 2x 140mm fan at the bottom of the case?

[@everlasting3563]

Only using m2 ssd?

[@abeidsalim8008]

looks like the Lian li case!

[@ChristopherFlannigan]

It does

[@berkovichshorts]

nice case, nice video.

[@thomasenright5282]

How can you increase the light effect with the Armoury Crate with the Aura effects, as I have mine on Rainbow and the Motherboard is not that noticeable?

[@THEREALGOD38]

I'm about to start a build in this case and have been looking at getting a corsair shift series rm1200x psu, the cables plug into the side and not the rear of the psu would this be a better option for cable management? Any advice would be greatly appreciated.

[@mindrover777]

Did you fit the psu

[@SavageMarksman321]

Tljust a heads up everyone.... that 360 asus cooler will NOT fit in this case for a side mount!!!! The case is not tall enough and does not provide enough clearance. I found out the hard way

[@steveg8337]

That's alot of fans lol. Do you think they are working against each other a bit or does it seem okay with the general flow of things?

[@admiralpiett]

I agree. Too many fans. The OP has 10 fans (not including the psu and vcard). 6 inward and 4 outward (again, not including psu and vcard). That creates a bit of positive pressure inside the case. It's probably okay, but I'm more conscientious about such things. Assuming the psu has the smart fan in it, i'd change the vertical 3 to outward and hope the vcard doesn't cause too much turbulance (if its not an encapsulated air tunnel). I'll have to look at my 4070, but if its like the 3060, its not exactly streamlined.

[@AntonyKanji-e9u]

Can I build games in gtarp server's

[@CARVI3D]

nice case, i like

[@NomadGhost]

11.43 remove the plastic from the holder

[@Hitthegasmedia]

I love this guy, but i'm not a big fan of this case. It seems like it has space, but it's angles aren't as smooth as a Lian Li or even the Corsair 6500X.

[@MG0301]

Damn this one is smaller than lian li O11 Dynamic Evo

[@ChristopherFlannigan]

The second compartment seems bigger, but the main one smaller

[@DaniilSamoilenko133]

Thanks for the review, really looking forward to this case on your channel. I have this question, is it possible to install 3 additional fans on top of the CPU heatsink ? Is there enough space without interfering with the motherboard and RAM ? like this kzbin.info/www/bejne/oXbKfZybYrF4q7M

[@datiproduction]

perfect

[@tuphelo]

The case itself is wonderful and brilliant🌟 However, I'm not sure of the system build 🥴 too many fans, no set theme, too many different things going everywhere..like it's a bit clumsy.. Good thing it's only temporal 🙂. I'd give it a.... (4.7/10)

[@matrix4342010]

best

[@NinesNX]

Hard Drives: Not here!

[@tahzib1451]

$550 for a AIO...good lord....

[@sebastiansg8082]

????? It cost 200 lmao

[@OGBxGaming]

trash build in the looks way. i just did that one and i placed the radiator on the back and all fans in front all black looks much better in all ways. take it apart throw everything white to the trash can and fix it and never disrespect that case ever again. i cant see this video

[@admiralpiett]

To each their own. I prefer building in white. It's a cleaner appearance in my opinion. Not everyone wants RGB blasting them in the face, and white components can subdue the lighting a bit. But again, to each their own. As far as AIO placement, I'd go with up top as well, as the cpu tends to generate the most heat overall, so removing the heat (heat rises!) up top doesn't allow a bit of it into the case. But, you do you! I will say there's entirely too many fans in there. I've the white GT 501 case with 7 fans (not including psu and vcard), and i've not seen high temps yet.

[@martdevera5313]

Im using the same case but may case fans rgb wont sync w/ my mboard, how to fix it?