But there so lcd screen shown in the schematic sir.
@veenarames76353 жыл бұрын
Great👍 Good presentation👏
@ZenoModiff3 жыл бұрын
Thanks ❤️
@TofuTheLhasa Жыл бұрын
where to connect the i2c board?
@padmajas67273 жыл бұрын
Good presentation👍👏
@ZenoModiff3 жыл бұрын
Thanks ❤️
@sanjaykhatri60936 ай бұрын
In the above video you have not shown were to connect SCL & SDA PINS TO WHICH PINS OF ARDUINO PLS REPLY
@ZenoModiff6 ай бұрын
SCL -- A5 SDA -- A4
@saidmussa55583 жыл бұрын
Nice broo
@hassansabiy23802 жыл бұрын
Hello Dr. How The crystal is install in the libarary arduno?
@ZenoModiff2 жыл бұрын
first go to this link :- github.com/arduino-libraries/LiquidCrystal/archive/refs/heads/master.zip open the arduino ide --> in the top go to --> sketch ---> include library ---> add zip library and show the zip file which was downloaded form the link for more info regrading this please refer kzbin.info/www/bejne/oH62mpZuaLWlqZo this video have a happy day
@seelanseelan51043 жыл бұрын
Superb broo
@ahamedfaham20513 жыл бұрын
Good presentation 🤓
@ZenoModiff3 жыл бұрын
Thanks broo❤️
@59sakshamrana42 Жыл бұрын
And from where do i get the arduino code libraries?
@sabindev3 жыл бұрын
Very informative
@ZenoModiff3 жыл бұрын
Thanks ❤️
@yadukrishnaep43163 жыл бұрын
Cool bro🙌
@ZenoModiff3 жыл бұрын
Thanks ❤️
@tayyababbasi37852 жыл бұрын
can u explain how i add buzzer
@ananddhanesan82753 жыл бұрын
Gud wrk mahn❤❤
@grandprime73973 жыл бұрын
Polichu
@59sakshamrana42 Жыл бұрын
How are you giving the power supply to the project?
@ZenoModiff Жыл бұрын
iam just using the microusb cable to power the project maybe if you need to take a step further u can use vin and ground of arduino
@59sakshamrana42 Жыл бұрын
@@ZenoModiff thank you sir
@59sakshamrana42 Жыл бұрын
@@ZenoModiff but for that we have to change the connection right
@59sakshamrana42 Жыл бұрын
Can you tell me?
@VarunPandithurai3 жыл бұрын
Awesome bro
@ZenoModiff3 жыл бұрын
Thanks ❤️
@shubhamshukla1673 жыл бұрын
Awesome 👌
@ZenoModiff3 жыл бұрын
Thanks ❤️
@escvlogs19253 жыл бұрын
Nice
@mjtales8523 жыл бұрын
💙🥳
@aiswaryarai20523 жыл бұрын
Thanks ❤️
@gielvandecamp2 жыл бұрын
How dio you get those senor values? (m, b, R0)
@ZenoModiff2 жыл бұрын
// For Gas sensors float m = -0.6527; //Slope float b = 1.30; //Y-Intercept float R0 = 21.91; //Sensor Resistance in fresh air these need to be used to get perfect values from the mq series sensors
@aryats58083 жыл бұрын
🔥🔥
@aiswaryarai20523 жыл бұрын
Thanks ❤️
@ZenoModiff3 жыл бұрын
Thanks ❤️
@hassansabiy23802 жыл бұрын
How did you connect the LCD sensor and the dht11 sensor
@ZenoModiff2 жыл бұрын
no i just wire everything essentially please refer the schematics :-- github.com/Zenomodiff/Atmospheric-Gas-Ananlyser-With-MQ-Series-Sensors-Dht-11/blob/main/Schematics.png?raw=true
@lil_tesla_69 Жыл бұрын
How to use nodemcu
@وليدمعافا-ج9ق2 жыл бұрын
How did connect LCD?
@ZenoModiff2 жыл бұрын
connect lcd via i2c module to pins a4-sda and a5 scl
@rk.peroor94413 жыл бұрын
Good 👍👍👍👍
@ZenoModiff3 жыл бұрын
Thanks ❤️
@akhilvenu57053 жыл бұрын
👍🏻👍🏻👍🏻
@mdaslamknl5 ай бұрын
Excellent Can you share the code Thanks
@ZenoModiff5 ай бұрын
it was on the description , for you here is the link to the code github.com/Zenomodiff/Atmospheric-Gas-Ananlyser-With-MQ-Series-Sensors-Dht-11/blob/main/Atmospheric_Gas_Analyser.ino
@dhe_falcon73713 жыл бұрын
🤝🙌
@paulygrows420 Жыл бұрын
Will u build me one ? How much?
@senthilmanim86623 жыл бұрын
✨
@ZenoModiff3 жыл бұрын
Thanks ❤️
@my_cutlery3 жыл бұрын
😻🔥
@ZenoModiff3 жыл бұрын
Thanks ❤️
@aljookir99992 жыл бұрын
How do I connect dht11 and lcd?
@ZenoModiff2 жыл бұрын
Simply delete all related function call for other sensors or comment them out
@ZenoModiff2 жыл бұрын
Use common ground , positive to Arduino 3.3v And data pin to Arduino related digital pin
@nandhananandhu74293 жыл бұрын
💖
@ZenoModiff3 жыл бұрын
Thanks ❤️
@nithinsreekumar55503 жыл бұрын
👍🏼
@ZenoModiff3 жыл бұрын
Thanks ❤️
@jishaprakash1593 жыл бұрын
👍
@ZenoModiff3 жыл бұрын
Thanks ❤️
@tayyababbasi37852 жыл бұрын
how send data to ThingSpeak
@ZenoModiff2 жыл бұрын
for that you need to use an iot module namely (esp8266 or similar) please see this code bit.ly/3rRPePa and write similar one , if need help mail on sreeramzeno@gmail.com