Atx पावर सप्लाई में एम्पियर और वोल्टेज को कैसे चेंज करें

Atx पावर सप्लाई में एंपियर और वोल्टेज को कैसे चेंज करें
Atx Power Supply Convert Adjustable Current And Voltage
Atx Power Supply Modified 3V To 24 Voltage-
• Atx Power Supply Modif...
Atx power supply No output- • Atx power supply No ou...
power supply modified 2.5V To 24V voltage output
SMPS modified .60Amp to 4.5 amp output
Adjustable voltage or adjustable current power supply
What is the voltage and current of computer power supply
How do I change the voltage on my computer power supply
Convert ATX power supply to 13.8 volts
How to get 15V from ATX power supply
ATX power supply adjustable voltage
Convert ATX power supply to variable
Convert ATX power supply to 24V
ATX power supply conversion Kit
Convert ATX power supply to lab bench power supply
PC power supply convert to variable power supply
Atx power supply modified
diy adjustable voltage SMPS
How to increase power supply voltage
How to get 15V from ATX power supply
Convert ATX power supply to variable
ATX power supply hack
Turn atx power supply into adjustable 2.5 V To 24V
What is a variable power supply?
Where is a variable power supply used?

[@rahulpatelgujratahmedabad3497]

Ap ne ye video hindi me banaya bahut achha laga mene ye bana he likin video sab turki or urdu me dekh ke banaya tha ak sal pehle to kuchh khamiya ho gai thi to sahi nahi chal raha tha or ic kharab ho gai ab market me 7520 ic milti nahi he.

[@totalcircuit]

Agar aapko 7520 IC nahin milati hai iski jagah per main IC ke number likh raha hun HS8110, EST7502, LPG899, SDC2921, CG8010, yah sabhi ic theek vaise hi working karegi Jaise 7520 IC working karti hai

[@lokeshchandrakar3769]

Thankyou sir is viedio k intzar tha

[@user-nn8ng6qb5u]

Very nice video

[@DineshPatel-oi1ch]

Thank you❤🌹🙏 Very very👍 good information.

[@totalcircuit]

Thanks

[@arjunlaldariya3132]

Very nice video❤❤❤❤

[@rahulkoley6161]

I made this one.. Its working.. Thanks for this important video.. When I use battery charging, it's Ampere is slightly fluctuating.. Like I set 5.5amp...and connect it with a dc 10amp volt amp meter... Its showing 5.23, 5.35, 5.5, 5.44amps...I mean 5amp is constant but after the decimal point the figure is randomly fluctuating... Any solution for fully stable working..?? I used the same as per ur diagram... Thanks once again..

[@totalcircuit]

In SMPS, you put a 1uf capacitor on pin number 16 of the IC.

[@rahulkoley6161]

@@totalcircuit Actually I already put a 1 uf capacitor... On this pin..

[@deepaknanda1113]

@@rahulkoley6161any update on this ?

[@ganeshkumawat2352]

Thanks

[@SandipDas-ct3dl]

I followed ur amp control circuit.. Its working properly.... Just one problem exists.. A loud noise from transformer is coming... FOR removing the noise an RC network {resistor capacitor network} is needed.. So that a delay network is formed... Can u tell me the calculations for selecting resistor and capacitor value...?? Thank you...

[@totalcircuit]

In this SMPS, RC network is already present in the switching transformer. If there is noise in the switching transformer, then put a 1uf/25v capacitor on UTC7520 pin number 16. The positive pin of the capacitor is on pin 16 and the negative pin of the capacitor is on the ground. By doing this, the transformer will be switched. may reduce the volume of Mostly this sound comes when the current is reduced in the switching transformer.

[@SandipDas-ct3dl]

@@totalcircuit OK.. I will surely try it and let you know the result.. Thank you. ☺️☺️

[@rahulpatelgujratahmedabad3497]

7520 ic me ho protection pin ati he ise us karne se amps ton laga ke hosakta he kya. Tl 494 ic me hota he

[@totalcircuit]

Tl494 ic main bhi pot lagakar voltage ko kam jyada kar sakte hain aur current ko be control kar sakte hain aane Wale video ke andar mein jald se jald batane ki koshish karunga Thanks

[@manojkumarkumawat9156]

Very nice

[@SandipDas-ct3dl]

Suppose I make no changes on pin no 16....I make only amp control circuit as u are showing and feed the lm358 pin no 1 to the pin16{v-adjustment pin} of pwm ic.. Can this way the amp is control....??

[@totalcircuit]

Yes, you can control the current only by installing Lm 358.

[@SandipDas-ct3dl]

@@totalcircuit Thank you..

[@rahulkoley6161]

Can I set current via output short circuit...??I mean positive and negative output of smps is shorted..?? Am I right..??

[@totalcircuit]

Yes, you can do this. Can you set current through short circuit? And you can also set the current by applying output load.

[@rahulkoley6161]

@@totalcircuit OK.. Thanks..

[@it_geek]

Sir CCTV ki power supply ka IC LNK6666E aur capacitor 68uf 450v fat gaye the... tu maine donno replace kar diye with same value.. lekin aab 6-7 din chalne ke baad capacitor ful kar leak ho jata... 2 bar essa ho gya.. naya capacitor b lagaya... kiya issue hoga bar bar capacitor fulne ka? Power supply 10A ki h 6 camera chl rahe hain (3 year se chal rahi h)

[@totalcircuit]

Power supply mein 68uf 450v capacitor laga hua hai is capacitor ka kharab hone ka Karan 450 voltage se upar voltage jata hai To yah kharab ho jaega To aap SMPS ki input per AC voltage test karo 250 voltage ac se jyada nahin hona chahie Kai bar Achanak jyada voltage aane se bhi yah capacitor kharab ho jata hai Aur ac input per ek bridge rectifier laga hua hota hai use bridge rectifier ko bhi multimeter se test karo Capacitor ko discharge karne ke liye 470k 1/4 watt ka ek resistance bhi laga dena Yah capacitor ki voltage range ko badha do 68 uf 450 volt ki jagah per 68 uf 650 volt ka capacitor laga do Sahi working Karega Thanks

[@it_geek]

@@totalcircuit thank you very much for reply. Bridge rectifier diode sab ok rehta h. 320-330 ke as pas voltage dikhata h capacitor par hot testing mein. Hamare yaha rat ko 260 tak chala jata voltage, lekin phir b 260 x 1.4 = 364v he hotein hai... Aur capacitor toh 450v rated h toh issue nhi honna chahiye. Wase b 3 year se sahi chl rahi thi supply. Sir muje lagta yeh new capacitor jo buy karein h AISHI company ke fake ho saktein h... Upar jo likha h aur jo rated h wo diff h. Apka suggestion sahi hai 650v rated ke try karta hon market mein achi quality ke.

[@sudipdas7987]

Actually the smps has HS8110 IC....when I am trying to increase the output voltage from 12 to 15....the smps going into protection mode... I already modified 3.3v,5v ,12v from 5v stand by voltage... I checked that when I try to increase the voltage the PT pin of this 8110 IC has 1.7v...thats why ovp is on... Can I disconnect this PT pin from smps circuit...??

[@totalcircuit]

You cannot remove the PT pin because it is an additional protection pin. There should be a minimum of 1.2 volts and a maximum of 1.3 volts on this pin. You can put a 1.5k resistor on this pin and connect this resistor to ground.

[@sudipdas7987]

@@totalcircuitbut if I put a 1.5k resistor from PT pin to ground...this is also a protection bypass..

[@sudipdas7987]

Plz reply me...

[@pratapkumargupta4056]

क्या 150ah बैट्री को चार्ज कर सकते है

[@totalcircuit]

जी हां 12 वोल्ट बैटरी 150ah के लिए आप पावर सप्लाई को 13.8 से 14 वोल्टेज पर सेट करें और पावर सप्लाई का अधिकतम करंट 6 एम्पियर से ज्यादा नहीं होना चाहिए अन्यथा पावर सप्लाई गर्म होगी और खराबी हो सकती हैं क्योंकि इस टाइप की पावर सप्लाई 80 से 100 वाट की ही होती है

[@rahulkoley6161]

If I use 4700uf 25v capacitor on 12v output section, which value of discharge resistor is needed and how much watt...??

[@totalcircuit]

1.5 kiloohm 1 Watts

[@rahulkoley6161]

@@totalcircuit Thank you.. Can I connect one 1k(half watt) +one 560 ohm (half watt) series wise to make 1.5k 1watt...?

[@totalcircuit]

@@rahulkoley6161 okay

[@SandipDas-ct3dl]

I noticed that when u adjust current potentiometer.. The set voltage is changed... And also, when adjust voltage potentiometer... Current reading is also changed on volt-amp meter.... Can u explain why it happens..??

[@totalcircuit]

Your question is correct, when the voltage is set in the SMPS, it decreases when the load is given, this happens when the maximum current of the SMPS is there, if it goes above that then the voltage will be less. For example, when you use less current in the SMPS. Set it and keep the voltage at full. When you apply load to the output, the voltage will be adjusted according to that load. You cannot take fixed current or fixed voltage from SMPS, you can take only one of the two like I am giving an example. And let me tell you that I have set the SMPS to 12 volts and set the current to 5 amps. The SMPS will keep giving 12 voltage as long as the current is less than 5 amps. As soon as the current is above 5 amps, the voltage will work automatically. I hope you have understood what I said, if you still don't understand then I will make a video about it sometime. Thank you.

[@SandipDas-ct3dl]

@@totalcircuit Thank you.. That means.. If I set 14.4v at output of smps for battery charging.. and set current about 4amps...it will continuously charge it at 4amps with maintained 14.4v.... Until the battery reaches 14.4voltage... And at that time of charging there is fixed 14.4v with 4amps....

[@deepaknanda1113]

⁠​⁠@@SandipDas-ct3dlin ur case the max current will be 4 amp at 14.4 volt, as the battery keep on charging , the current will kepe on decreasing.

[@deepaknanda1113]

4:26 100k resistance or 100ohms ???

[@totalcircuit]

100k resistance pwm ic internal operational amplifier feedback resistance pin14 aur pin 15 lagti hai 100E resistance pin 9 per lagti hai is par 5v denge to SMPS off ho jayegi is ko (GND) ground dene per SMPS on ho jayegi

[@misirali7173]

How can I increase the output current up to 10 amp?

[@totalcircuit]

In this SMPS, current cannot be increased more than 5 amps because the transformer in SMPS is very small. How can you increase current above 10 amps and 10 amps, I will tell you in the upcoming video. Thank you.

[@misirali7173]

@@totalcircuit Okay, waiting for this.

[@sathyaprasad1411]

👌👌👌👌👌🤝🤝🤝🤝🤝🤝👍👍👍👍👍👏🏼