Рет қаралды 2,098
Audi A3 8L MK1 - Replacing the H7 road bulb
Replacing the H7 high beam bulb in the Audi A3 8L MK1 is relatively simple and you can do it yourself by following the steps below:
Step 1: Preparation
Ensure the key is in the off position and disconnect the battery (optional).
Open the hood of the car.
Step 2: Locate the bulb
Find the headlight: Find the headlight that has the H7 bulb in it. These are usually headlights located on the front of the vehicle.
Step 3: Remove the old bulb
Locate the connector: Locate the bulb connector, usually located on the back of the headlight.
Unscrew the connector: Unscrew the bulb connector by turning it counterclockwise.
Remove the old bulb: Once you have unscrewed the connector, you can remove the old bulb from its socket. Avoid touching the new bulb directly with your fingers as the oil from our skin can shorten its life.
Step 4: Insert a new bulb
Insert a new bulb: Insert a new H7 bulb into the socket. Make sure it is firmly seated in place.
Twist the connector: After inserting the bulb, turn the connector clockwise to secure the bulb in place.
Step 5: Check operation
Check operation: Turn on your high beam headlights and check that the new bulb is working properly.
Step 6: Close the mask
Close the hood of the car.
Remember that when replacing bulbs, it is worth paying attention to the bulb type and wattage to ensure that the new bulb meets the requirements of your vehicle. If you are not sure which type of bulb is appropriate, check your vehicle's owner's manual or consult a mechanic.
Audi A3 8L MK1 - Replacing the H7 road bulb
Visit the channel; for more;
/ @naprawynawariackichpa...
Second channel;
/ telefonyklasyczne
Third channel;
/ spankoasmr
#poradnikizróbtosam