Lovely work Tony. Came here from the gun video tonight. Lovely colour. You make it look so easy lol
@TonysRefinishingTV Жыл бұрын
thanks mate
@KeanuTC2 жыл бұрын
Honestly is next level work your putting out mate fair play!
@TonysRefinishingTV2 жыл бұрын
lol nah man just a nice repaint thats all
@wotnoturbo2 жыл бұрын
Stunning work !
@TonysRefinishingTV2 жыл бұрын
Thank you so much 😀
@davutyalcin-2 жыл бұрын
Great job Tony,its a long time ago i posted a comment ,I've been busy lately with work and moving to another house . Hope you are well buddy. Davut
@TonysRefinishingTV2 жыл бұрын
Thankyou mate and great to see you back in the comments mate , I’m good thanks hope you and yours are all well too
@shaunhardie60772 жыл бұрын
Stunning finish, only thing I can say.
@TonysRefinishingTV2 жыл бұрын
Thanks Shaun
@fattoamanowoodwork36382 жыл бұрын
love how it looks good man, really great re making fibreglass look like the metal, great tip. Also great re setting as I just painted a spoiler and in the very last coat of clear the temp of my shed (my booth -lol) was quite hot, low flash off tie and 10% thinner and... runs, over the whole spoiler. :( ||Thank you for the advice as always
@TonysRefinishingTV2 жыл бұрын
Your very welcome mate glad the video could help in some way too bud hope you are well
@Shadowmosesarea512 жыл бұрын
Amazing work Tony
@TonysRefinishingTV2 жыл бұрын
Thank you kindly fella hope your well buddy
@bddmedia2 жыл бұрын
Hi Tony, wow that has come out beautifully, i love what you have done around the rear window surround where it meets the roof guttering. Much better finish than i left it. Top work buddy thank you.
@TonysRefinishingTV2 жыл бұрын
Your very welcome mate took some doing but I think you’ll agree makes the world of difference
@bddmedia2 жыл бұрын
@@TonysRefinishingTV oh yeah totally agree.
@deanbrown76432 жыл бұрын
That bespoke work must have taken ages and ages but look at the result bro nuff said 👏👏👏👏
@TonysRefinishingTV2 жыл бұрын
thanks man
@frasertinman70802 жыл бұрын
Hi tony. See for when you thinned out your basecoat for the respray did you do the whole batch in one or just as you needed it and shake the neat basecoat well before thinning. Also how much basecoat approximately did you go through with the whole job? Cheers bud and hope your good.
@garypollentine1942 жыл бұрын
Good job as always nice blue too mate
@TonysRefinishingTV2 жыл бұрын
Glad you like it buddy its come up lovely
@jimmypratt64502 жыл бұрын
Superb work Tony. The Novol polyester spray filler got me out off a problem this week badly damaged door on a Nissan Note , also been using the high build primer good stuff . My collection off guns is ridiculous and then your using the Fuji which i've been looking at for a few months tempting lol.
@TonysRefinishingTV2 жыл бұрын
Haha sorry man I’ve had a few new ones recently I’m playing with don’t mean to tempt you guys lol just wanted abit of variety to the vids lol
@jimmypratt64502 жыл бұрын
@@TonysRefinishingTV Just bought a hoodie to support your channel , keep the vids coming great content i know it must be hard work after grafting all day . All ido is open a bottle vino and try too relax lol .
@TonysRefinishingTV2 жыл бұрын
@@jimmypratt6450 thanks mate and you didnt have to man but i appreciate that fella and yeah its not easy with a business and youtube channel but i make it work
@ze_german29212 жыл бұрын
I am listening you talk about the Sata gun and I just purchased two IWATA WS400 and LS400 1.3 now that it has been 4-5 years since your last review, where would you place these two guns compare to the SATA ?
@TonysRefinishingTV2 жыл бұрын
the sata is a better gun mate but its alot more expensive , the w400 range youve bought is the best bang for your buck as far as price and performance goes
@steveguest80282 жыл бұрын
Looks amazing Tony top job 👍
@TonysRefinishingTV2 жыл бұрын
Thanks 👍
@jezisvole2 жыл бұрын
Hi. I am now subscribed. Thx to your superbly-explained videos I am picking up great tips whilst learning to spray paint. I will be spraying smaller items for renovating pinball machines (legs, trim, lockdown bar, cabinets) mostly candy + pearl clearcoats over different bases. I was advised to get the ANI R160 gun ( mid sized ). Do you have any experience with this gun ? ... and any extra tips ? thx P.
@TonysRefinishingTV2 жыл бұрын
im afraid i dont have any tips for that mate as ive not really used one tbh, tips wise id just say try to make sure when applying the candy ect that you do really nice even coats dont go to heavy to soon just take your time and get some practice in before
@masoodamg66332 жыл бұрын
Magnificent Tony👍👍👍🌺🌺🌺
@TonysRefinishingTV2 жыл бұрын
thanks mate
@azacink2 жыл бұрын
Top work as always 👍
@TonysRefinishingTV2 жыл бұрын
thanks fella
@johnsmith-qz4bv2 жыл бұрын
looks amazing....
@TonysRefinishingTV2 жыл бұрын
thanks john
@adampye9052 жыл бұрын
How many coats of base? My last job I'd f##ked up only did two and a drop and still transparent
@TonysRefinishingTV2 жыл бұрын
three full coats mate and two drop coats on this
@JohnWD40TC022 жыл бұрын
Hey Tony, great premier last night and the live chat was as usual great fun with some helpful advice along the way. This Audi is a real credit to your dedication and attention to detail, all the time hours and sleepless nights that has gone into this project just shows that you put quality and finish above profit and makes me wonder how you made any profit on this job, this is truly a stunning looking car and no one could have done it better. I know you didn't fit the pickup conversion but do you know if fitting it effects the structural integrity of the car? did it need any bracing to keep the shell rigid and safe on the road? Looking forward to the next one mate 👌🙏👍
@TonysRefinishingTV2 жыл бұрын
i cant comment on the structural part mate im afraid ive had nothing to do with that side fella, and on this one mate i wont turn a profit i just want it done right and a happy customer at the end of it buddy but thats on me no one else , great to have you in chat as always mate and keep smashing those awesome little jobs out mate
@JohnWD40TC022 жыл бұрын
Ok thanks Tony I didn't think you would know what went into the build, it's just me being nosey again, I can't imagine there are many companies out there that has your work ethic mate they just wouldn't do a job like this for no profit, kudos to you Tony you deserve so much more recognition for what you do 👏👏🙏👍
@MrSprocket2u Жыл бұрын
Do you know Geoff Ridgeway ?"
@davidparker27242 жыл бұрын
Mega as always matey!!!
@TonysRefinishingTV2 жыл бұрын
Thanks david
@ANDY-we7mr2 жыл бұрын
Good job its,a like from me. Is that your favourite gun 🔫 now the wolcom 360
@TonysRefinishingTV2 жыл бұрын
thanks man and i wouldnt say so tbh
@vehiclesprayerssociety2 жыл бұрын
😍😍😍😍😍
@ประธานสุธรรมมา2 жыл бұрын
❤👍🙏🙏
@TonysRefinishingTV2 жыл бұрын
Thankyou
@maya007952 жыл бұрын
Too good 👍🏻👍🏻💖💖
@TonysRefinishingTV2 жыл бұрын
Thanks man
@orkengoss13152 жыл бұрын
I think that Walcom is like the Tesla of the sprayguns