Audi S8 Lowering Module Install

How to install an H&R ETS lowering module on your D4 Audi S8

[@eugenepotafiy9303]

Did it affect ride quality? What's the difference vs doing it through vcds?

[@MarkZeds]

I didn't know the module was so expensive.

[@jamesb6018]

Should have taken some pictures of car been in lowest setting

[@jephtawallace2135]

A whole year and no response 🤨

[@scottnunya2441]

What year S8 is this? My 2013 has the modules that you show on the left as being on the right behind the large fuse panel.

[@x96535]

Scott Nunya that’s a 2015. All the stuff switches around with the facelift cars.

[@x96535]

Scott Nunya it’s a 2015. You are correct. The facelift years are opposite of 2013/2014.

[@parkermah5458]

Me too. I have 2013 S8 as well

[@kellyanderson5442]

Good job. Would you happen to know where the suspension control module is? I have to change one in my A8

[@stubdepotllc.7539]

i have an s8 too, would love to drop it a little, does this have the ability to drop in increments or is it all or nothing?

[@jephtawallace2135]

StubDepot Tickets Good question 💯

[@szymonsadowski5624]

Drops in increments

[@АндрейАуди-н5ш]

А для чево эта штука?

[@gibshall2007]

Did you disconnect the battery before doing this?

[@krystiankrychu2507]

I'm pretty sure you can lower any audi with pneumatic suspension using vcds adaptation

[@x96535]

Krystian Krychu you are correct to an extent. VCDS on allows you to lower by -15mm. This module will go down to -40mm, and the CETE controller will go to -55mm. Everyone I know that has lowered on VCDS says it rides more rough. That’s not the case with these aftermarket lowering modules.

[@LivingstonFishing]

Looks perfect. Any idea if I can find a lowering module for a 2019 A8L?

[@TheHoroSexual]

MTM F-Cantronic II AUDI A8 (D5/F8) for air suspension

[@stubdepotllc.7539]

also does it ride different?

[@jephtawallace2135]

@pinnacle which lowering module holds better reliability for a 2014 Audi S8 D4, H&R Lowering or the BLE?? I’m interested just need some guidance in regards to both choices. Thank you in advance!

[@parkermah5458]

Yes I second the motion. I have 2013 D4 S8 and have been wanting to lower it as well. I didn't know about BLE having a module as well.

[@x96535]

Not sure why they would have any more information than you. They’re not a dealer for either module.

[@yavor20v]

Hello! How big are the wheel spacers? I suppose it's on 9J with 275 30 21 tyres? Thanks! :) Very nice with lowering module!

[@andrewfoley8979]

Would love to know the wheel spacer sizes as well plz

[@yavor20v]

@@andrewfoley8979 I put 20mm rear and 15mm front spacers. Little bit of rubbing from time to time at the front tho. Same size as mentioned above , same wheels as in video. Happy new year!

[@andrewfoley8979]

@@yavor20v Your timing was perfect! Ordered them today and thanks very much for responding!

[@DD87336]

So all u did was install that module and it lowered? You didn’t have to do anything to the shocks/springs?

[@beluga8180]

Hands blocking the camera dud

[@RaRahGully]

Will this work on an Audi A8L D3?

[@x96535]

Sunny Ra Deen no

[@Demoaccount-i2k]

Was this like 20mm drop

[@leandrovaldez4910]

With the h&r module you can do up to 4omm like 1.5inch