AUDI/VW BATTERY CODING USING VCDS [UDS Protocol]

Quick step-by-step tutorial on how to code a new battery into the gateway module of the MY2012 and later VAG vehicles, which supports UDS protocol access to the gateway. #vcds #tutorial # vag-com #audi #vw #vag #diagnostics

[@user-xn7qp5kc6v]

This video should be highlighted. These are by far the most clear instructions on how to adapt your BEM to a new battery.

[@pavelppp888]

Thanks man flat it helped!

[@petyamihneva5592]

Useful tutorial 👌 Thank you

[@pavelppp888]

Please Subscribe and turn on the notifications, so you don't miss any of the new videos! All Best Regards, Pavel Petkov.

[@andrert2178]

Do the 2009 cars with obd can protocol, have this type of coding battery adaptation ?

[@pavelppp888]

Yeah, all from 2008 onwards should be with it. From the VW brands.

[@jankojurko7846]

battery cod bosch ? varta = bosch? VAO ?

[@motorgeeks2053]

Hey, I am going to change the battery on my 2019 Tiguan 2.0 TDI. I will be using a battery named Amaron. I do not see it in the list. Which name should I put?

[@pavelppp888]

Hi, you can put VAO (Varta)

[@cameraz99]

I bought an *Interstate* battery at Costco, and they told me that the vendor code was *JOB.* Do you know if this is correct? Thanks!

[@pavelppp888]

I think there is no such one but you can use the JCB one or the VAO one.

[@pedrosobral9564]

Ive got a golf mk6 1.6 tdi 2010, do i need to code it aswell? Whats the point of coding anyways? Better battery performance?

[@pavelppp888]

From golf 7 onwards.

[@andreaiecher2199]

Hi Pavel, if I change from EFB original battery to VARTA A8 AGM battery where do I need to select the new "type" of battery? Can you confirm that this tutorial is correct for Polo AW1 2018 too?

[@pavelppp888]

Yes, the tutorial is correct for the vehicle that you mentioned and the type of the battery in your case it will change so you should import that into the vehicle. This can happen by editing the battery type of adaptation value of the gateway.

[@OMGitsFLY]

Hey i just installed a sub yesterday in my audi a5 2012 but when i got done to turn on car after about 2/3hrs the car wouldnt start everything works inside just it won’t fire up but when i try to push/start it it comes on but no start but makes clicking noise like battery is dead 🧐🧐 do i need to jump it or since i disconnected the battery for a while it needs to be recoded??

[@pavelppp888]

You can try to jump start, there should be no issues

[@OMGitsFLY]

@@pavelppp888 yea i was thinking the same thing because its the same battery not a new one im try jump tomorrow and see

[@ByteSizedSociety]

I'm curious what the issue was? Bad battery or low on charge?

[@cosminmargea4750]

For a aftermarket agm battery without bem code what i can do for adaptation ?

[@pavelppp888]

You can use the one for Varta (VAO)

[@BABZ786]

Hi I want to change my Audi A1 2016 1.4 start stop battery I have the battery code on top of current battery If buy a Varta battery with no code on top how do I register the new battery

[@pavelppp888]

This is what is described in this video. Select the parameters of the battery in the gw module adaptations.

[@sabotage3d]

Thank you! How do we save the original settings just in case?

[@pavelppp888]

You can take a photos or write them manually down. The adaptation channels cannot be saved in a log file like the codings, at least I don’t know a way for that to be done.

[@florinconstantinescu926]

@@pavelppp888 You can save a file: VCDS - Applications - Controller Channel Map - Address 19, Adaptations, CSV file!

[@pavelppp888]

@@florinconstantinescu926 thank you for the information. I hope it will be helpful for others also.

[@leagueboost4961]

Does i need to do adaption for a6 c6 2007 avant?

[@pavelppp888]

It is a little bit different. You can search for “battery adaptation non-uds” and a video from Voss Tech will show you the procedure. I have done it on my a6 c6 some years ago

[@anscx]

Im getting an error while changing values "Conditions not correct or request sequence error"

[@pavelppp888]

Please, check the vendor ID and code in the vcds settings. You can google |vcds vendor codes" and try inputing a different one. This error can be caused due to messed up vcds settings and if the vendor id is incorrect, the procedures like coding and adaptations cannot be executed.

[@medch4193]

hi sir where can i find the serial number of the new battery please

[@pavelppp888]

It have it only to the original batteries. If you bought a normal aftermarket, just change the currently stored serial number in the car to something else (for example change the last symbol) and store it that way. By doing this, the car will know that there is new battery installed.

[@adaml4946]

What name i should choose for Bosch ?

[@pavelppp888]

The VA0 (Varta one) is used for Bosch. They are basically the same battery, just rebranded. Both Varta and Bosch are made in the same factory.

[@adaml4946]

@@pavelppp888 thank you

[@TheFoxfy]

@@pavelppp888 аз съм с оригинален акумулатор BMW ,към Варта ли спада и той ? Нямам въпросния сериен номер,който имат другите производители 10-11 цифрен ?

[@qazi9184]

If I put same battery then coding is no required ?

[@pavelppp888]

You should change only the serial number. That way the car will know that there is a new battery installed.

[@qazi9184]

@@pavelppp888 thanks ❤️❤️

[@danielcraciun8914]

From where did you took the new numbers ,or you changed them random

[@pavelppp888]

The serial number is changed random. The number for the capacity is the corresponding capacity of the new battery.

[@danielcraciun8914]

@@pavelppp888 my problem is that i don t know if the shop ceded the new battery ,and i have this problem with rpm going at 1000 ,not 900 ,and i checked and from alternator is going out 14.3 and in the back at the bateryy is 12.4 . Someatimes i got this management baterry code on vcds ,so i can not find the problem ,maybe is the cable because i was reading about the positive cable from a4 b8 2009 . Or there is a charging module or idk.😑

[@waqaskhan989]

I have a 2007 Audi q7 will this video work?

[@pavelppp888]

Nope, you need the old method by coding the battery control module. Search for a6 2007 battery coding - that is the correct procedure for your vehicle.

[@waqaskhan989]

@@pavelppp888My battery does not have a bem code or qr code?

[@pavelppp888]

You can use one of the codes that I show in this video to reprogram your car. It is just the module that is being reprogrammed. That is the difference.

[@mlf953]

my question is vatra and VAO or VA0 (zero)

[@pavelppp888]

Its selectable menu, so is predefined which one it is. But if you need to write it, its always the letter O.

[@sircariterl2]

Stored value for bosch or willard ?

[@pavelppp888]

You can use Vao

[@sircariterl2]

I buy battery Moura can u tell me stored value please

[@arrrrr9831]

Is the serial number the same as the BEM code?

[@pavelppp888]

Not as the entire BEM Code. Part of the BEM code is the serial number.

[@arrrrr9831]

@@pavelppp888 ah okay. Is the Bem code not necessary for uds protocol?

[@pavelppp888]

@@arrrrr9831 nope you can just perform the steps shown in the video cheers

[@arrrrr9831]

@@pavelppp888 great thank you.

[@zekeriyaeren7202]

İm in turkey and i have turkish battery name mutlu i sellect wich one ?

[@pavelppp888]

You can use the Varta one.

[@zekeriyaeren7202]

@@pavelppp888 actualy i search in turkish forum and i found true code but thank you

[@AntonioSantos-uj3nk]

When I change de serial number ( 1 number) or all thé number for thé New serial code i havé a message ( please enter alphanumeric caracters

[@pavelppp888]

What language is your PC? Try with another symbol, even with a letter.

[@RomanTrollanski]

For some reason I have CAN protocol and "adaptation" button it's not selectable... What I am I doing wrong?

[@pavelppp888]

Are the other options available, such as “measuring values”. It is possible that the VCDS itself it’s old or unsupported and cannot interpret the adaptations and the bottom remain unavailable