Autel Consultancy | IM608 VS Maxisys Elite - Comparison Review 2019

[@josephsaim8056]

it can read and write EPROM data from the old ecu to new ecu for both Mercedes and BMW.But cant do online calibration for both cars.You can do BMW and Mercedes programming if you have old ECUs.Thats where G-BOX 2 comes in. Guys do not worry,the IM608 J2534 can do BMW & Mercedes Benz online calibration /Programming at maximum of $60 for daily subscription

[@MatthewTaylor3]

Are you saying that you only use the J2534 with a laptop and not use the IM608 to do the programming with the external $60 subscription?

[@jumanjimedia6324]

will it get the pin for a renault kadjar 2018?

[@danielsloan9460]

What I do like about it is going into older ford models pats system to add keys if there all lost, you can’t do a all keys lost you have to go into diagnostics and go to security, and you can add key when it shuts down fords, like 2000 to 2007

[@bullgamer7343]

Good video let’s say you are focusing on modules and modules only. What Autel would you recommend .Ultra or 608pro2

[@jessejuliano5336]

Re: MB ML 350, you said 608 will not program key, will the Elite? Or does Autel not have the capability?

[@bryanflammia4175]

which tool do you think is better Maxisys Elite ll or the Maxisys MS908s Pro ll

[@rogerbrandt6678]

I screwed up and bought a mk808 off Amazon, wish I would’ve bought from you curt, but I’m looking at a 608 in the near future.

[@raycadbury]

What is Autel ADAS? Can both the elite and 608 cover Lamborghini or Rolls Royce even diagnosis?

[@bshaddad74]

Hi buddy An amazing video and so grateful for the great info you covered. I want to ask you about the newer version of IM608 pro if you can do Mercedes’ Benz keys ? Thanks 🙏

[@ericejtminowicz9942]

Good information! I bought IM608 back in June I love it but don’t feel like I’m utilizing fully. I wish my distributor was as knowledgeable as you.

[@AutelConsultancy]

Hi Eric. Thanks for the compliment! I hope you enjoy your tool. I do offer consults if you need over the shoulder training. You can go to my website www.auteltech.co.za and click the diagnostic tool consultation or j2534 training service.

[@mamoudousawadogo8029]

​@@AutelConsultancy salut quel différence entre autel im608 et maxisys élite il faut faire aussi vidéo en français pour nous otre Merci pour la vidéo

[@robertomanue7681]

Hi Is the im608pro2 still not do bmw and Mercedes online ecu programming? Also I have maxis 908pro purchased 2019 if I buy a new subscription will have the same capabilities as the new mk909? Thanks in advance

[@charliealexandria3785]

I like Autel's strategy. Basiclly you will at some point need both machines. Autel has split the two machines make double the money from machine and updates all this could have been one machine.

[@AutelConsultancy]

Hi Charlie. Yes it could . I even asked the engineers why they didnt do this and they said that it would increase the price of the IM608 and they wanted to keep it at a certain price point.

[@dbillionaer]

Can you add the xp400 to the elite???

[@AutelConsultancy]

@@dbillionaer Nope! The Elite has no Euro key coding software on it

[@gverhoeff39]

Is the Mini Cooper using BMW technology ?

[@WheepyMAW]

@12:20 MaxiSys Elite does allow to read mechanical key cut code for brands which allows it ! But I have to admit that AFAIK, only BMW (using CAS2-3-3+) and some Opel/GM do have this option ... @13:00 MaxiSys Elite does allow to program many european key that can be programmed by the dealer ! (not all, of course) and it does requires the PIN code... I frequently do VW, Audi, Opel, Peugeot, Citroen, Fiat,... without problem. What it CAN'T do is read most pin code, and program keys that require precoding, or that comes already progrogrammed from the factory (BMWs, Mercedes, etc)

[@AutelConsultancy]

HI Michael, Thats great to know. I know on VW i can get the PIN code with the elite but I was never able to do any key coding with it becaue the function was never there. Maybe you should share with us how this is done because the engineers ( and what I have seen) the tool didnt have any key coding options on a big majority of the euro vehicles. I just dont want people to think that the elite has equal capability as the im608 in terms of key coding because its huge difference.

[@WheepyMAW]

Autel Consultancy you can use it like a traditional dealer tool (or equivalent). for VW it’s like VCDS process (check Ross Tech website, they have a full part about immo). For Peugeot or Citroen or Fiat, it will work perfectly but ask for PIN code... which Élite can’t get, but IM508 yes. In dealership, the diag tool don’t give the pin. They need to use another web interface or CODE CARD if available. But of course it has nothing to compare with IMx08. I’m a locksmith, have tons of locksmith tools, and still use Elite very often!

[@waska9]

which model is this maxisys elite?

[@asle9971]

Doesn't im608 have maxiscop installed?

[@osvaldovazquez3315]

Is the im608 good for domestic vehicles?

[@chrisglobals1969]

Can the IM608 can reset adblue system to make the car start

[@kyriakosmousoulides7004]

want to know witch of AUTEL-IM608-PRO-PLUS and XTOOL X100 PAD3 X100 is the best to use for key and remote programming

[@1fnjo790]

Curtis , Did Autel ever follow through offering ECU programming from off the MaxiSys Elite tablet for Volkswagen Audi Group vehicles like it does for BMW and Mercedes vehicles or just limited to some coding?. Seemed to remember Support mentioning over a year ago that it was adding programming for Volkswagen and Audi for MS908P and Elite .

[@gpcdiagnostics]

The is Rumor that the new Ultra will support Programming for other Brands (Have heard VW and Toyota) but nothing confirmed.

[@nidalmotii4630]

Hello Autel consultancy. Is the J2534 in Autel 608 compatible with the new FCA firewall?, how Does it compare to the Cardaq M?

[@ramone9853]

Hey how do you obtain mechanical key code with the im608

[@performancerdllc2585]

Autel has great phone support. walk through many problems with team view link.

[@Auto-Tech]

Is there any screen recorder that is compatible with the IM608 or the Maxisys? Thank you for your time.

[@gpcdiagnostics]

I have used and recommend Mobizen Screen Recorder https:mobizen.en.uptodown.com/android/download1819650 Note: You need to use V3.6.0.28

[@Energiz0r1]

How much VW Jetta key coding and all keys lost would an MS906BT be able to do vs an IM608?

[@AutelConsultancy]

The ms906BT has no European key coverage.. Overal its key coding is 2.5 out of 5

[@AJ_Halvajian]

Thanks for that, this guys the best.. I know I'm chiming in late here but can I ask, does the im608 support obd1 & come with proprietary adapters? (Like the 908s and elite)

[@sanjayjames1778]

Hey curt i live in Canada how much Is the im608 with the g box and apb112 give me the overall cost

[@fernandovazquez7542]

WORKING ON A 2018 DOGE RAM 1500, IM REPLACING THE BCM BECAUSE IT HAS A WATER DAMAGE, MY QUESTION IS CAN I REPROGRAM THE NEW DONOR BCM ON THIS TRUCK WITH MY IM 608 ???

[@AutelConsultancy]

Its hard to if the module needs programming or just coding with out looking at the repair information first. If your sure it need flash programming then you need the witech software. If it just needs a configuration procedure then you need to if the Autel Im608 can do it. I charge to vin special function request so I recommend contacting autel to see if its covered. If it does need to be flash programmed I can train you on how to do it for 200 USD . Witech software is 125 USD for 3 days access.

[@wazeemmohamed3819]

I have AUTEL maxysis , and maxicom, but I need key programmer for bmw and Mercedes and European cars in Japanese and American what is your advice please thank you very much

[@البيضاني-لكهرباءالسيارات]

السلام عليكم مشترك جديد هل يمكن ان تختار لي افضل جهاز في السيارات والشاحنات والبرمجه والتعديل كل الانضمه

[@jeremystone6613]

Good breakdown of the differences and very useful info. However I am still torn! I am always wondering what I am missing out on by not having key coding but I would like to to have programming capacity. IS there a separate key tool that can bought alongside the Elite that has the level 5 capacity of the IM608?

[@AutelConsultancy]

Hey Jeremy, Yes you do have an option if you already have an Elite. You can consider the IM508. Its a stripped down version of the IM608 . The 508 doesnt have the advanced diagnostic software and it doesnt have the j2534. So what you are investing in is the key coding software. Its much cheaper in price at 1800 USD

[@jeremystone6613]

@@AutelConsultancy thanks. So you would suggest the IM508 alongside the Elite as the best compromise? Can you suggest a good Australian distributor?

[@AutelConsultancy]

@@jeremystone6613 Hey Jeremy. If you specialize on BMW and BENZ then it will be good to invest in the ELITE to have access to the programming software. Remember 98% of programming is done with a laptop and the j2534 ( you dont use the tablet) If programming on these 2 manufactures is not important.. Then you can get the IM608. If you need bmw and benz programming programming then get the Elite and also the IM508. Regarding good Australian distributor I dont know anyone that offers the same services as I do. What I would suggest if you want my support is to do what my Asutralian clients do and thats order the tool from me. This way I can ensure you get the right tool and help you get results after you recieve the tool. There are some additional accesories that Autel is making that I can offer in your kit that your local distributor doesnt know about.

[@charliealexandria3785]

I am based in U.K. So how do you implement warranty issues for overseas customers? You can offer additional accessories other resellers can't? You are the choosen one, me thinks not. Just a promotional video. If any Autel user needs guidance contact your reseller, join a user group via facebook etc.

[@2winPerformance]

Can the IM608 do anti-theft radio for newer Mercedes? If not, which diagnostic tool would be best for anti-theft radio on newer European vehicles?

[@AutelConsultancy]

You would have to set up diagnostic tool consultation for me to research and give you a tool strategy. Go to www.auteltech.co.za and click the diagnostic tool consultation

[@2winPerformance]

@@AutelConsultancy Ok thank you!

[@rogerbrandt6678]

Curt I have a question let’s say I buy from you, the im608 and get the consultation and I need help, when are you available.?

[@the_knife_degenerate]

I have performed an all keys lost function on an older Honda Accord with the elite. Changed the cylinder and the elite took care of it with no issues when having to program the new keys

[@AutelConsultancy]

yes , asian and american vehicles you can do these key coding functions. On the European you cant however with the Elite

[@dbillionaer]

Great job you half assed it now the customer has two sets of keys for the car........ Next time have a locksmith code it to the originals or just repair the old one........

[@AutelConsultancy]

@@dbillionaer I dont understand? My job is to help clients refrain from sending work out . Why do this when they have the tools and equipment themselves? Also if you I told the client to send this job out.. how will they learn the skillset to do the procedure in the future

[@dbillionaer]

@@AutelConsultancy because they don't have the tools or the skills to get the job done properly. All they are really doing is screwing over the customer because they're not doing the job right. They're just being greedy and doing a s*** job for their customers. Now since the mechanic has changed the ignition the car no longer matches we now have two keys for the car. Not the customer loses the key it's 10 times harder to make a key for the car because the keys in the car no longer match. YOU are doing your customers a disservice by doing a half-ass job that you should not be doing anyway send it to a damn locksmith you. Send away jobs YOU CANNOT DO PROPERLY. STOP DOING IGNITION CHANGES THAT CHANGE THE KEY FROM THE ORIGINAL YOU IDIOTS. THIS IS HALF ASSED GARBAGE WORK. A LOCKSMITH WILL JUST CODE THE IGNITION TO THE CAR OR JUST FIX THE OLD ONE. 99.99% of these ignitions can be repaired you just have no idea how And you sure dont have the tools Hows your understanding now bud?

[@AutelConsultancy]

​@@dbillionaer HI but if I recieve a call and a client needs me to teach him how to do a procedure.. I am going to do it. The client learns a skill that he can apply on the next job and more important his customer his happy. There are times when it is appropriate to outsource things .. but if my client has the equipment and me to assist him on that procedure , there is no way im going to outsource anything ( not on my watch) If you dont like the syle on how I assist my clients then this content isnt for you.

[@haridasc5639]

IM608 Can support any diesel light vehicles?... for example Toyota, Mitsubishi and Nissan Engine and Automatic Transmission DTC and data.

[@gpcdiagnostics]

No, But MS906BT and Elite have Light Asian 24V Software

[@ramishbiachoo1392]

What's the best tool u would recommend for a professional locksmith and doing basic diagnostic?

[@AutelConsultancy]

Hey Ramish. For me to serve you accurately I would suggest booking a consultation with me so I can align with with the right tool . Go to www.auteltech.co.za

[@YLTMauto]

Thank you for the bideo. We just talked about this yesterday. I need them both.

[@jrblaxxx2340]

BOTH👍🏿👍🏿👍🏿

[@Davidaburtoyfavy]

Hello body i have a question, i am from central American Costa Rica, my question is: if i buy to you the Maxi equipment is working in my country or not?

[@AutelConsultancy]

Hi David, I can only gaurantee it will work if I sell you teh tool direactly. If you purchase online you have to do your due dillegence and hope they dont send you a unit thats not good for your region.

[@Dg-zj6jo]

hi there sir ....Autel MaxiCOM MK908 ultimate is that ok for doing suspension on my bentley gt 08 air struts if i need to bleed down a leg for change out please, great videos

[@loutech7209]

I purchased my elite 2 year June 6, 2018, and my subscription expires June 6, 2020, i had no idea i could had programmed BMW and Benz, because like U.S i thought i'd need a separate subscription and laptop. It's sucks because i was ask a few times if i can program few BMWs and Benz and I said no. I didn't know the subscription was through my autel. Because of this i lost money. I have a Benz came to me last week 2007 S550 and the ISM is no good. for some reason it was bringing down some of the network. After i unplugged it the computers that were off line came back up. I waiting on the new module and for the first time i will try using the Elite to program it! If i have trouble i know who to call. ;)

[@silkgambia]

Hi Curt, I live in the US but I am trying to buy the IM608 intended to be used in West Africa. Is there any specific tool for that location or any other tool purchase it the US would work?

[@AutelConsultancy]

HI Silk. Book a consultation with me by going to my website www.auteltech.co.za . Then book a diagnostic tool consultation. Ill then call you up and share with you a logistical strategy that will allow you to aquire the tool so it wont get IP block. I have helped a few clients in west africa.

[@1fnjo790]

I wonder since the IM508 and IM608 has been released that Autel has started gradually degrading some of the key programming capability of the Maxisys in order to create more need for shop to buy a more specialized platform.

[@AutelConsultancy]

They are actualy doing the opposite. They are adding key coding functions to the Elite software . I have a projected plan on when they are implementing some of these features. But its always going to be a level 2 out of 5 while the IM608 is 5 of 5

[@xhemajlmujota5270]

@@AutelConsultancyim608

[@dbillionaer]

Can you add the xp400 to the elite???

[@JamesValentineBaja1000]

@@dbillionaer yes......!

[@flixproduction6875]

Hello Curtis I have one thing to ask I will like to know what make the IM608 better then the xtool x100 pad2 pro

[@AutelConsultancy]

Hello, I would have to make a video on this also I dont know your needs. If you want me to give you definite answer go to www.auteltech.co.za and book a 1 hour consultation. Then ill give you clarity on which tool is right for you.

[@arnoldespinosa5602]

What do you recommend for automotive locksmith I also need to be able to do Toyota Lexus and honda reflash to program keys

[@AutelConsultancy]

IM608 It has a j2534 for the programming. and diagnostic software to cover all vehicles and the locksmith level key coding

[@alexseshie-eklu5460]

Which of the tools can be used for all cars programming ?

[@AutelConsultancy]

There no such tool that does programming for all makes and models from the tablet.

[@Davitc98]

Wich one is best?

[@AutelConsultancy]

I dont know your needs. You should book a diagnostic tool consulation service so I can align you with the right tool.

[@c14back2nitrogen9]

How much for the elite software?

[@WillsHellaHeat]

Will the maxisys pro programmed vin to Mercedes Benz used ecm? Or only the elite

[@AutelConsultancy]

HI WIll. The both have the same software. Nothing is different but the hardware

[@Goldwinger74]

Are you still on KZbin? I have a question about my PCM on my 2006 Ford F-150 5.4.

[@AutelConsultancy]

Hi Dwight, Whats your issue

[@Goldwinger74]

@@AutelConsultancy Thank you for replying. So my truck won’t crank, it has all power, the lights, blower motor, everything works except no start. I’ve changed out the starter, the ignition switch and the neutral safety switch and still doing the same thing. I’ve even checked all of the fuses and they’re all good. When I turn the switch I can hear the starter relay click but that’s it. I connected an OBDII to the diagnostic connection and it says it can’t communicate with the system. That being said do you think it could be the PCM? When i connect the OBDII up to the connector, it actually powers it up but it keeps saying it can’t establish a communication. I did pull the starter relay out and jump those two pins and it will engage the starter and turn the engine over but of course it still won’t start. I have no idea what else it could be. Please help.

[@legitlocksmith7361]

To program a module on a bmw or mb. It will program a used module? And what year model is supported?

[@AutelConsultancy]

Hey Papi , It depends on the year of the vehicle. I noticed on older vehicles you can use used modules . On new vehicles you may need a new one. If you want to get into more specifics I recommond booking a consultaiton at www.Auteltech.co . I can give me serval VIN numvers and I will validate the features you want to do research on.

[@JJ-ez9rh]

Hi whats the best tool for auto-locksmith? Thats covers hood range off cars ?

[@AutelConsultancy]

Hey JJ. IT really depends on your indivisual needs. If you want my recommendation you can go to www.auteltech.co.za and book a diagnostic tool consult. This way I can as you the right questions to get to the root of your problem and devise the right tool and accesories to achieve your goal. Otherwise if you want to self diagnose yourself you can search the internet or my videos to come to a conclusion. Hope this helps!

[@JamesValentineBaja1000]

@@AutelConsultancy I love everyone who wants free knowledge, 🤦‍♂️. Just like ppl asking Technicians questions, and them expecting us to tell them for free. 😅🙄

[@AutelConsultancy]

@@JamesValentineBaja1000 We need to stop that as it lowers your value in my opinion. One of my clients refers to people who ask for free advise as "Ask Holes" lol

[@JamesValentineBaja1000]

@@AutelConsultancy 100% agree with you!!!

[@spthagreat1870]

Should I buy a used autel elite are just buy a new one.

[@AutelConsultancy]

Its hard to say with out diagnosing your thoroughly, but typically buying a used module is risky as you dont know what "baggage" is associated with it. And the only way to fix those issues is to buy an update. So your cost is just as much as a new one.

[@spthagreat1870]

@@AutelConsultancy where is a good place to buy a new autel elite

[@AutelConsultancy]

@@spthagreat1870 Well it depends on what you want. If you just want to be sold you can purchase anyone online. But if you want to be served , I can assist you.

[@joseloslopez985]

The most helpful video to compare this 2 big powerful tools , tank you so much.

[@AutelConsultancy]

My pleasure !

[@deeprince8479]

Keep up the good work Curtis. You is the best.

[@deeprince8479]

From Delano

[@AutelConsultancy]

Thanks Dee. I really appreciate your support and Ill continue to make good content for you . Thanks

[@sherlockhomeboy4031]

elite or mx908? because I'm confused. you said the mx908 was. better in another video but you're comparing these 2 instead of the mx908

[@AutelConsultancy]

HI Sherlock. What I suggest if you want to 100 Percent certianty that the tool you need is right for you to book a consultation by going to www.auteltech.co.za . Each person has different requirements and I cant determan which till is better for that indivsual unless I dive deep and ask questions that will help determine which tool is right for them. What I suggest if you dont want to book the consultation is to watch the videos again because I didnt say the MK908P is the best. For some people it might be a bad option.

[@sherlockhomeboy4031]

you seem pretty smart. I think I will book a consultation because I was for sure buying the im608 before watching your videos. and now it seems like I need to buy 7k worth of scan tools to get complete functionality

[@AutelConsultancy]

@@sherlockhomeboy4031 Hi Sherlock.. After the consultation im pretty sure you dont need that much to invest. If anything I can formulate a strategy that will reduce your cost. Look forward assisting you.

[@phillipslay4483]

Will either of these support VIDA

[@AutelConsultancy]

Yes with the J2534 you can use it with VIDA

[@qrs3658]

Hello Curt, I wanna buy a tool that could do Key programming for a BMW, Audi & Merc. How do I get the tool from you?

[@julienlebeau861]

i just broke my ms908.... can i buy only the elite tablet?...dont need all the kit

[@AutelConsultancy]

Hey Julien . Sorry to hear that. I asked autel this years ago and the wont just offer me the tablet unfortunetly.

[@junianius]

I’m looking into buying a tool but I don’t know which one will be best for my needs is there any way you can email me to help me get the right product?

[@AutelConsultancy]

Hi Justin. go to auteltech.co.za and click the diagnostic tool consultation service. Hope this helps

[@imsuperlucky777]

will the Im608 reprogram/program a 2008 Chevrolet suburban Transmission control module?

[@AutelConsultancy]

The J2534 and and OEM subscription will allow you to do that . It comes with the IM608

[@dbillionaer]

So the answer is NO it cant 👎 But if you use it as a basic passthrough it can But so could any basic passthrough device..............

[@JamesValentineBaja1000]

@@dbillionaer NO scanners can do it! They all need a J-Box to complete said task.

[@Жека-ю8о]

What programm do you use on laptop fo programming with autel???

[@AutelConsultancy]

You need to download the manufactueres programming software. Each one has a different website were you need to download it for a fee.

[@alexseshie-eklu5460]

Can IM608 for all cars key programming tool? am from Ghana

[@AutelConsultancy]

Hi Alex, yes I sold to serveral clients in Ghana.

[@upnorthballa]

Are you able to make a video on ADAS with elite or 908p? Will reach out to check pricing on 608. Interested in purchasing

[@AutelConsultancy]

Im working on a 2 part series but I dont have an ETA when it be released. I can consult and develop a strategy that will be the best ADAS package for you. go to www.auteltech.co.za and book a DTC ( diagnostic tool consultation)

[@iamtobiizzy]

Thank you for taking time to do this

[@dennismelville7532]

Is this an actual video of a comparison... or is this another long winded "sales pitch" of why we should buy from you and not anyone else that have long winded videos of how the system works... and 45mins later we still don't know how or what it can work on?

[@AutelConsultancy]

Hey Dennis. This is the wrong video for what your looking for. Tell me which tool you are wanting to learn about and I can send you a video on the tool of your choice. ( Keep in mind all my videos have a call to action as I do sell Autel tools and my client services)

[@kkaround]

@@AutelConsultancy hey, i have im600 and i want to get new remote/chip generated tool. Which one do you think i should buy? Vvdi, keydiy, handy baby, or something else you can recommend?

[@justinweaver7553]

Did you actually watch? 30 minute video, not 45. If you didn't gather the difference between the two you should probably not be working on cars at all, well maybe oil changes and tires but leave the keys and programming to your competition. If everything has to be spelled out for you, you're not going to figure it out.

[@nicke2307]

Do you have a comparison of the 906CV and 908CV?

[@AutelConsultancy]

Hi Nick I dont actualy. If you want me to help you decipher the difference you can book a consult with me at auteltech.co.za . Or you can call autel new york and they can give you general information

[@edwinvillafane2171]

What do you do when your SD card on your scan to goes bad and your schedule tells you SD card corrupted how do you fix that problem

[@AutelConsultancy]

HI Edwin, I asume you have the ds708? Well if thats the case the only option you have is to see if you can purchase an update subscription to install the new software into a new SD card. But the cost of an update is not justifiable since your tool may not be supported anymore. In the future if you dont want to get into this situation again you can order through me . Contact autel new york as they give free general support

[@MD-on2wv]

@@AutelConsultancy send me an email at [e-mail]

[@weldingjunkie]

I have the elite and im508 I did that so I can have programming for bmw and do what the 608 can do mostly besides cas4 bmw and Benz. Being able to keep adding micro sd cards are huge I’d rather have that then 64gb

[@scotttim9461]

I have the elite as well, im trying to figure out is it worth to buy the 608 or will the 508 be fine. can you do most all vehicles with the im508 with key programming? and what ones cant you do?

[@weldingjunkie]

Scott Tim you can do cas4 bmw, Benz (need adapter) and Audi. They say it doesn’t to VW but it does. I’m ok with that though. I love the 508 if I didn’t have the elite I might of bought the 608 but I can do more with the elite and 508.

[@scotttim9461]

@@weldingjunkie Thank you for the reply, also yes i was looking at that what adapter is it? and do you know where you can get the adapter? Yes I already own the ELITE and buying the 608 is like re buying the ELITE not worth the money and everyone is trying to make you buy the 608. however i believe if you own the ELITE all you need is the 508 for keys and it will be a better option.

[@weldingjunkie]

Scott Tim hi the adapter is for BENZ and it looks like a Benz key and it connects to the scanner. You can also buy nust the x400 scanner if you really want to do cas4 bmw too. The software from the 508&608 are identical. No difference at all.

[@dbillionaer]

Can you add the xp400 to the elite???

[@albertgiles5128]

Can the im608 calibrate passenger seats

[@AutelConsultancy]

Hi Albert . Gernerally speaking yes it can.

[@kimnilsson7501]

Does this machines, 506/608, do Volvo keys and remotes?

[@AutelConsultancy]

Yes.. Generally speaking yes I did a procedure with my client on a volvo. If you need more vehicle coverage then you can go to my website auteltech.co.za and book a Diagnostic Tool Consultation. Then you can give me 4 Vin numbers then I will ask the engineer in charge if the tool you are inerested in will work for that vehicle

[@michaelsieber6601]

Do you sell tools in the USA? I’m still a little on the fence about which one to get

[@AutelConsultancy]

Hi Michael, Yes. 70 Percent of my clients are in the usa. Feel free to set up an appointment at www.auteltech.co.za . Click the service diagnostic tool consultation.

[@albertgiles5128]

Can the im608 do passenger seat calibration on all cars

[@AutelConsultancy]

HI Albert, I would be lying to you if I said it can do it for all cars. But generally speaking yes.

[@albertgiles5128]

Autel Consultancy between the im608 and the elite which do u think is better? For diagnosing cars. Programming ecus. I mainly do airbag work.

[@AutelConsultancy]

@@albertgiles5128 Hey Albert if you want me to serve you better I follow a very specific process that gets my clients the results that they want and it all starts with an consultation in which you can book via www.auteltech.co.za . Then ill be able to ask you more questions to get to the root of your problems and then advise you on which tool is better for you. Plus I can put together additional tools that will serve you better. After the consultaiton I will email you a proposal document of everything we discussed with additional recourse that you can use later. Then if you want to purchase through me then we can execute the strategy to reduced your costs. Or you can purchase locally .. Its up to you. Hope this helps

[@draganpejakovic8248]

fiat bravo id46 not precoding

[@dontcareboutname1]

@autel consultancy Will the im608 retain all of its key programming abilities if I don’t continue the subscription to Autel??

[@AutelConsultancy]

Generally speaking you can use the im608 doesnt need a subscription in order to work. But there are some manufactuers that requre a valid subscription in order to connect to the interent to do the key learning proceedure.

[@JOHNPHUFNAGEL]

@@AutelConsultancy will we need a LSID? I had to program a module through GM and the website says i needed a LSID or a NASTF number to continue.

[@AutelConsultancy]

@@JOHNPHUFNAGEL HI John. Its not manditory but if your getting into any immo security modules.. I think they will require this in order to continue. But to program TCM PCMS You dont need it.

[@josephsaim8056]

yes but it might mess up the firmware of the tool if not updated to the latest software.have fallen a victim before

[@aymanalshree7851]

Does im608 work in north africa region or is it for u US and EU only?

[@AutelConsultancy]

Hi Ayman, I would just need to sell you a device for your region. Then it will work fine

[@performancerdllc2585]

Great video, Lots of information. you seem to know a lot about Autel tools. keep the videos coming.

[@keyworxautolock8235]

Will the IM508 and 608 Synchronize a new replaced antenna on ie; 2004 Dodge Caravan or the Fobik ignition box on a ie: 2012 Dodge ram. Or does this procedure still have to go to the dealer to get programmed in?

[@AutelConsultancy]

I dont know off the top of my head . You should book a diagnostic consul with me for detailed questions. This way I can get them validated by the engineer

[@necipbakir2545]

Yes it works perfectly

[@legitlocksmith7361]

Hey bro. You said im608 can pull a key code. For what car?

[@AutelConsultancy]

Hey Papi. I cant provide the data for each year make and model with out getting input from the engineer. But Ive done it on a ford recently.

[@AutelConsultancy]

Many vehicles. If you want a detailed report you can book a consultation from my website . www.auteltech.co.za

[@dbillionaer]

Key code? No not really very very very very few Key coding? Yes Very few cars store the key code internally.

[@JamesValentineBaja1000]

@@dbillionaer it will tell you where to find it in those cases.

[@1fnjo790]

The Memory is 2GB of RAM (Random Access Memory) . The 32gb or 64 gb SSD is the difference between internal storage capacity

[@weldingjunkie]

1FNJO no the elite has 64gb too it’s been that way for 1.5yr

[@joseloslopez985]

Hi teacher 🙂 , yesterday in a mechanic school the professor program a BMW with Im608 this is operation is possible with im608 !😃 The professor replace the engine control module. Today is \ 30\ April\ 2020.

[@AutelConsultancy]

HI Joselos, The Im608 doesnt have BMW or Benz Programming available on the tablet. Programming is when you inject a calibration file into a module from a server. The IM608 doesnt have access ( on the diagnostic side) of autels servers . Hey might have used the j2534 or used the xp400 to execute it on the bench. I wasnt there but all I know is that programming is not available on the im608 accourding to the engineers.

[@joseloslopez985]

@@AutelConsultancy but Elite, and mk908p, ms908p can do to ? 🤔 The program BMW and Benz? or only Elite. I go to make sure about I said about the professor on the mechanic school. I found today this information for you today

[@CBRRR-eh3ky]

@@AutelConsultancy he may be taking key programming for ecu programming

[@honda1990able]

Hi nm il m interested in the élite where can i purchase from you?

[@AutelConsultancy]

Hey Nestor.. You can go to my website www.auteltech.co.za and click the diagonstic tool consultation.

[@dbillionaer]

Can you add the xp400 to the elite???

[@1fnjo790]

The Elite probably lacks the immobilizer key programming functions where an XP 400 would be required to perform the key programming . XP 400 is not included as an optional Elite adapter.

[@josephsaim8056]

that will not work but the European version has it.Its called MaxiIM IM908

[@Corey497]

I take it there's no app download to put the IM software on a Elite then. Damn. I can't believe my "Elite" won't let me program a fob to a 15 Chevy Sonic and I can't see buying another scan tool and J-Box when I already have them

[@AutelConsultancy]

Hi Corey . I whish there was a Jesus tool that can do everything but unfortunetly Autel does this on purpose. The strategy I would advise for you is not to purchase the Im608 .. But im508.. Its 1800 USD and its a toned down version of the im608.

[@Corey497]

Ok.Cool. THANK YOU!!

[@MotorheadRedo]

The only reason Autel won't allow German car programming and oscilloscope features on the IM608 is to increase profits for Autel. I remember when transponder key programming tools first became popular. A company called Advanced Diagnostic was charging close to $10,000 for a scan tool with all the software upgrades to configure cars to recognize new transponder keys. That same tool is now obsolete, and is being cloned in China and sold for a few hundred dollars online. Just goes to show how much the actual hardware is worth. As soon as these electronic tool companies get a corner on the market they start charging technicians an arm and leg for a few lines of code like the ability to retrieve the key code on some cars. If technicians knew how much Autel paid for the hardware they're charging thousands for they would all become sick to their stomachs. Its too bad it work like this.....

[@gpcdiagnostics]

IM608 can be used with the MP408 Scope. It couldn't to begin with, but now it can. As for Programming with the IM608 I doubt there would be many shops that would be prepared to pay for an 'all in one' tool (Hell I even get complaints that the MS906BT is too dear!) Plus the idea of having multipul tools so you can work on more than one car at a time is more practicle for most workshops who run more than one tech. Yes Autel is out to make money - What business isn't. With ALL Scantools Hardware would only be 10% at best of teh actual cost of the tool. Most of the money would be in wages of the 100's of R&D tech WORLDWIDE getting code and rewriting it to suit their Scantool, and then there would also be licencing fees to teh OEM's (and that won't be cheap).

[@ManuelTorres-eo6de]

Hey bro where do you sell your products I would like to buy the IM608

[@AutelConsultancy]

HI Manuel. If you would like me to represent you as a client I have a process that involves an initial consultation. Go to www.auteltech.co.za and click the diagnostic tool consultation. Then ill call you up discuss your needs. If we both find that we are a good fit then ill send you the paypal information

[@myssarnaddour7629]

hello there i have Autel Elite , today i was trying to make a new key to my Hyundai ix35 , so i went to immobilizer using my Elite after that i went to password teaching and changing , and i put a 1234 , after that the car is not turning on and i cant go back and change the password one more time , when im trying its telling me that ( not accepted by invalid key or locked smartra please check the system ) can you help me somehow ?

[@AutelConsultancy]

I can help but I charge for outside clients. Have you contacted autel new york?

[@myssarnaddour7629]

@@AutelConsultancy no i have not , the issue that i live in Sweden and the Autel support here is not good , you call them they dont answer you or help you in any way , so is there any way to contact you if i need help , i can pay no problem but i want to keep in touch in a way

[@AutelConsultancy]

@@myssarnaddour7629 Hi Mysaar . I understand. You can go to my website auteltech.co.za and click the diagnostic tool consultation service. Ill call you up and assist you with your problem

[@battletechniques3594]

Curt- in need of a purchase. How do I reach out to you?

[@jacobnbr11]

Hello Curt, Nice video and I love your attitude. I am an Autel customer for life and was just browsing videos and stumbled upon your channel and got to thinking that I need to do business through you in the future. I currently have the DS708, MS908, IM608 & 2 Autel TS508's. We do full service car-care, Automotive Locksmithing, and Collision repair so we are high volume and always upgrading. My question for you is: if I buy from you, what kind of support will I get? I mean right now I have to call Autel and work with them but I feel like when I buy a product from a vendor I would really feel better buying it from a guy like you who is always hands on with the product. My 908 is out of date and my intentions is to not update at this time but replace the hardware then add the adas system with targets.

[@AutelConsultancy]

HI VSP. I really thank you for the kinds words and I am glad the you see the problem I am trying to solve. Im going to be making some videos that will answer your question with real life examples.. But all I can tell you is your overal cost of owneship will be dramaticly reduced and I have other skill sets that are beyond Autels tools. More importantly ill make sure your using your tools to its maximum capability. When your ready we can talk over the phone and I can listen to your pain points and devise a strategy to solve them. Auteltech.co.za

[@iosifmocanu7852]

great video, keep going with them mate

[@AutelConsultancy]

Thanks Isoif. Ive been busy consulting but I have 3 presentations coming soon!

[@hensanchez]

i have both scanners tools they are amazing can you send me the link you use for GM i guess i have to pay for one or two days use like Ford? thank you for your videos

[@CBRRR-eh3ky]

Even after paying 3k for the IM 608, one must subscribe to the dealer website?

[@JamesValentineBaja1000]

@@CBRRR-eh3ky duh.

[@adiamriveracastaneda3225]

Hey good morning I love your video but my English is very bad do you any possibility to translate please you have Spanish Tecnichian to

[@mrhelohlocksmithsshop4433]

Both? Friend?

[@charleybrown4243]

Hi, I am in the UK, I require something to code/sync a USED ecu to the car, a 2008 Nissan Micra petrol/gasoline. Would you say the IM608 can do this?

[@AutelConsultancy]

Hey CB, You can book a consultation with me at www.auteltech.co.za Then I can share with you which one of our tools can do this. Ill have it verified with the engineer in charge of the Nissan app.

[@alfonsoguzman2099]

Why can't Autel just make one powerhouse that will do everything?? I Would buy it for sure

[@AutelConsultancy]

Alot of guys say they same thing when trying to find a woman..Its like trying to find a unicorn as they simply dont exist lol. On a serious note most people in my opinion dont pick the right tool in the first place. Or if the tool they select is missing a feature they need, they might overpay for a tool that they really didnt need. The best thing I would recommend is to get a tool strategy. This way you can get the right tool that will do most of what you need and also strategy of other tools that solve special problems.

[@trysomebots9740]

How much I want to buy this tool am in Botswana

[@AutelConsultancy]

HI there... Before we jump into price I would suggest booking a consultation with me to help understand your needs first. Then from there I can align you with the right tool and help you get results with the tool. Book a Diagnostic Tool Consult at www.auteltech.co.za Thanks

[@davidjacobs8558]

23:02 the wrecked ML and fixed ML are NOT the same car. they have different wheels, and running board is missing.

[@AutelConsultancy]

Hey David , Thanks for your sharp eye. The picture isnt the clients vehicle. I literally used a google image to make visual ex ample. Its difficult to find a before and after picture of a VIN Number my clients wanted me to do research on.

[@bogdanonofrei7956]

How do we get it from UK?

[@AutelConsultancy]

I can supply you with a tool if you want me to represent you. Other than that I dont know any uk suppliers that specializes with training / consulting

[@josephsaim8056]

you will pay over 600 pounds import duty when it shipped from overseas to the UK.

[@obdprice]

@@josephsaim8056 I got one from UK local dealer, works great!

[@nanakofiaddo8478]

How do I become an Autel tech ?

[@CBRRR-eh3ky]

8 months still no answer?

[@nanakofiaddo8478]

07 CBR1000RR he thinks am coming after his business but I live in Switzerland.. lol 😂

[@sagadzhanyan]

I couldn’t program a blank key 2008 Mbz s550 I had original key but key did not work but I had blank key but couldn’t program I was very upset spending all that money that didn’t do the job I used the new 608 I paid 3200 something

[@AutelConsultancy]

HI Sagad, Why dont you report it to the supplier who sold you the tool? I understand your frustrated but unfortunetly I did not sell you this tool so I wasnt able to help troubleshoot the situation and give a reason why the IM608 didnt execute the procedure. There are many variables why it didnt work . All I can say is let this be a teachable lesson to ask your supplier (before you purchase) if they offer over the shoulder training and troubleshooting. Othwerise the vehicles are too complex to want to do this stuff alone and sometimes (even for me) my engineer is the only one who can educate me and my client as to why its not working.

[@sagadzhanyan]

I’m sorry thought you work for autel

[@sagadzhanyan]

I have another question I bought to autel one of mine autel is due for renewal do I have to buy two subscriptions or can I conect both two one

[@AutelConsultancy]

@@sagadzhanyan Each serial is unique so you need to buy another subscription for each tool.

[@jonathancunningham2686]

I just ordered the elite from Amazon. I wish I'd watched this video a week ago.

[@AutelConsultancy]

Hey Jonathan. I just had a bmw dealership return their unit after the saw my channel as well. If you really need the tool you can keep it but if you want to get the most out of it and reduce your overal costs dramaticly I can help. Take Care!

[@ahrai3255]

Does this autel obd scanner work in Nepal?

[@AutelConsultancy]

@@ahrai3255 Yes. It works all over the world you just need to make sure you purchase the unit thats set for your region.

[@JamesValentineBaja1000]

😂😂😂😂