1st time using the Autel IM-508 on a Jeep computer replacement. I'm use to my other programmer :) locksny@yahoo.com
Пікірлер: 36
@richtownc12 жыл бұрын
Thanks for the videos, I'm almost 10 years in and still soaking up the knowledge
@locksny2 жыл бұрын
That's why I put videos up, to share the knowledge.
@robertwilkins839 Жыл бұрын
Just did a 2008 Chrysler Town and Country with the im508 I transferred secret key then replaced WCM,required 2 new Fobik Keys then rewrote VIN information then car started.
@locksny Жыл бұрын
Nice !
@dashtyATG2 жыл бұрын
Wow Didn't know my IM508 would do that thanks for sharing your experienc. Would that work for other Jeep Dodge Chryslers if yes how can you know on witch specific year and model? I'll be following your Chanel.
@locksny2 жыл бұрын
The 508 does a lot more then most know. The one way to know if it will do it, is to try it.
@dashtyATG2 жыл бұрын
@@locksny I agree like I never thought u can remove my keys on for Smart keys wiv 1 key when I've tried was easy to do I've done many.
@BrigidoMercado-k9z Жыл бұрын
if this computer is compatible with chrysler town and country limited 3.8 V6 year 2005 .?
@AreaCode8622 жыл бұрын
Wow and I'm sitting here struggling with mine on how to reprogram this 2019 Nissan Altima MAF replacement. It's not longer just plug and play, any advice on that? I just subscribed, wish I was in NY too get one on one training.
@locksny2 жыл бұрын
It's all getting crazy, some stuff you can't change a headlight on without a reset now.
@garveycrooks13522 жыл бұрын
Can the im508 program a new computer as well?
@locksny2 жыл бұрын
Sure does
@benhajdu4040 Жыл бұрын
When replacing PCM on chrysler products is it just the skim that needs to be reprogrammed? I have a 2011 dodge ram with a bad pcm
@locksny Жыл бұрын
You have to write your info to the PCM.
@richarddiaz824810 ай бұрын
Hi how do you write your information to the PCM
@jamescc2010 Жыл бұрын
Was that an old key or a new key you just added? Can 508 program ECU for most cars including German?
@locksny Жыл бұрын
I programmed a used computer out of a junk yard, I started with a new key. It can do some computers, not all.
@crash_override9435 Жыл бұрын
@@locksny Any idea if the 508 can write VIN's to the early 2000's dakota / durango / ram PCM's, such as swapping in a junkyard PCM?
@locksny Жыл бұрын
@@crash_override9435 shouldn't be a problem if it actually has a chip in the key
@taldim88 Жыл бұрын
Do I need to wrote down the Vin number of the vehicle that im working on, or do i need to wrote down the vin number of the vehicle that i took the ecu/pcm from? Ty
@locksny Жыл бұрын
You need the VIN off the car you're working on.
@gverhoeff392 жыл бұрын
Interesting ! I'm looking for one for my 08 JK ..to replace my WCM module as well a PCM if need be .. I was thinking the 508 would do it and you basically showed me it would .. I was also thinking of just going up to the 906BT . I need one I could use on my 17mustang , 18 Subaru and my 07 super duty ..basic stuff like what you just accomplished .. the 608 comes with the j2534 I don't believe I need that because I'm not writing programs .
@locksny2 жыл бұрын
The yearly subscription is crazy on the 608.
@gverhoeff392 жыл бұрын
@@locksny IM508 will work for the Jeep jk ? Using the xp400 or j2543 Bluetooth .. I didn't see Jeep us listed ..
@locksny2 жыл бұрын
@@gverhoeff39 For a computer ?
@gverhoeff392 жыл бұрын
@@locksny What ever it's called .. I just need it to update the replacement hardware with vehicle information just as you did .. WCM , ECU, PCM , ECM ETC it's electronics sooner or later they going to fail , currently I'm replacing my WCM on the JK . So just need to replace it and I saw that function in your video .. When I checked autel website for vehicle support they listed the the 508 as IM508(immo) with no us Jeep available which was odd .
@locksny2 жыл бұрын
@@gverhoeff39 IM508 should work fine on the JK.
@cosimo50292 жыл бұрын
Was the replacement ECU used or new?
@locksny2 жыл бұрын
Used
@richtownc12 жыл бұрын
Auto Pro Pad vs IM 508? I see that you use both. Which one is your favorite/go to?
@locksny2 жыл бұрын
AutoProPad is still my go to. The IM508 is moving up the list fast as I use it more and more. I still have a SmartPro and a pile of other machines.
@boloout1872112 жыл бұрын
nice didnt know that
@locksny2 жыл бұрын
One thing about cars, there's always something new to learn.