#Autel

[@julisouthard35]

You have NOOOOO idea how much this helped!! Toyota's seem to be THE most pickiest of all vehicles to get to work correctly. UNTIL NOW!! Thank you so much for sharing this! Super pumped that I don't need to send to another shop to figure it out.

[@arumugamt5234]

Thanks

[@mplscarsales6652]

Best video out there that actually shows how to use the Autel without video cutting .my only question is can it read and identify other brands besides the MX brands ? I have the new MK906BT I think I can do this but not sure until I try. Thanks in advance

[@isalmankhan1]

Thanks Chad, for another great one👍

[@blongsta5]

Would this work to put on a second set of wheels like a winter set?

[@cobbysparks9891]

Just found your channel.Neat content Sir. SUBSCRIBED! Keep it up!

[@arumugamt5234]

Thanks

[@monsieurjeanroy6536]

do you need the car for programming?

[@elwapo5509]

can i relearn or program different brand sensors or does have to be only autel sensors?

[@FlashPerformance]

When it comes to programming it is only Autel sensors, However the Autel TPMS tools can relearn: OE, VDO, John Dow, OriTec, OE Match from Napa

[@marqwisknight8175]

Can i use any sensors from my local autopart store. Or does it have to be a mx sensor

[@FlashPerformance]

VDO, or OE match from. Your parts store will work

[@wyattoneable]

I have the Autel 906 but not with the "TS". Darn, now I wish I spent the extra money for that additional option.

[@FlashPerformance]

It's only money, but the TS also 😂

[@kc8tyk86]

I can confirm the 906BT works the same since I purchased it. Autel site is wrong.

[@cedricmarcellana1399]

Do they Program Different sensor brands aother than autel sensors?

[@FlashPerformance]

kzbin.info/www/bejne/rKiwqXuubbyij9k Here is a video talking about the different sensors that can be programmed

[@fitzzy81]

hi i also have an ms906ts and i can detect the old sensors but it will never acknowledge new ones. ive tried this everyway possible and it never responds to new sensors.

[@FlashPerformance]

Are you using the Autel one sensor? It will not work with other brands of sensors.

[@pablovidales8489]

Thank you for the help

[@jtr990]

Chad, if I remembered the last video 2 years ago, you replaced the right-rear TPMS sensor with the Autel MX 1-Sensor via copy by activation using your TS401. How did that sensor last?

[@FlashPerformance]

You are correct, and good catch. I didn't want to confuse anyone in this video So I just didn't mention it. That sensor is still running strong and shows full battery life. I actually took it out of the wheel and I will use that on one of my other vehicles. I can reprogram it multiple times with no issue.

[@jtr990]

@@FlashPerformance Good to know. Just got a TS508 and over a dozen MX 1-Sensors at my workplace last week from our tire equipment supplier. Can't wait to use them.

[@FlashPerformance]

@@jtr990 I did a few videos for the TS508 that you can check out. Make sure you do the updates and you will be all set.

[@jtr990]

@@FlashPerformance Got it! Thanks a bunch, Chad!

[@cedricmarcellana1399]

Where do you get a pack of 20 sensors ?

[@FlashPerformance]

All the major US retailers sell the 20 pack of sensors they are part number 300010. amzn.to/2SXq9BB

[@willgomez1737]

Can ts 508 unlock vdo SE10002A and SE10003A sensor ?

[@FlashPerformance]

This feature is only available in the toolkit on the TS608 and 906TS.

[@Snaraa]

Can you programm used sensors?

[@FlashPerformance]

Maybe, depends on the brand of sensor. If it is an Autel sensor you can reprogram it as many times as you would like. If it is another manufacturer it depends on if the vehicle is an exact match. To many variables to answer that question...

[@kennysabillon2113]

Where can I buy the batch of sensors?

[@FlashPerformance]

All of the parts stores have the 8 and 20 packs. You can also check with your tool truck.