Almost lost breath laughing 😃, "Remember Where I Come From!"🥴🥴🥴🤣🤣🤣🤣
@stevohdee81182 жыл бұрын
Hehehe
@sparkiekosten59024 жыл бұрын
I enjoyed it! Minnie's voice was perfect. I especially like the use of minnie saying"you know where I come from"....That was gold. Also the use of minnie's voice to help explain some of the more trickier lathing operations makes it that more enjoyable than some voice droning on about how to do this. The fact that you can turn out such a professional piece of work on a small lathe means that people can see that "minnie" lathes aren't all bad. You're engraving is something else! Everytime I write something the person reading it says I should have been a doctor! Keep up the brilliant work!
@stevohdee81184 жыл бұрын
Thanks sparkie, yeah these lathes take a lot of tuning & adjustment to get a decent result. I pity new buyers that think they can turn stuff straight outa the box. I've noticed the new, blue machines hitting the market are so sub-standard that they're not even worth considering seconds, fourths, fifths maybe. It seems they have slapped all their reject parts together & flogged them off to unsuspecting buyers, what you recon? Regards stevoh
@sparkiekosten59024 жыл бұрын
@@stevohdee8118 I run a Hare and Forbes al 336 and it needed a lot of adjusting to get it to work correctly. The best thing is it has headstock adjustment which make a huge difference to prevent taper turning!
@stevohdee81184 жыл бұрын
@@sparkiekosten5902 that's nice to know, seen your model around, thought it looked fairly decent, I'm surprised you had hassles with it. Might be a common thing with some brands hey.
@reinhardtilker8552 Жыл бұрын
Ultimate Masterpiece, love it! 🏆
@HanstheTraffer3 жыл бұрын
Dude, you rock. I WISH I could do work like that. Or I wish you lived next door...I'd have you make all the stuff I need that is beyond my abilities.
@lisag27713 жыл бұрын
This is awesome! Great job 👏🏼
@stevohdee81183 жыл бұрын
Hey lisa, thanks for your comments, mill vice no brand on it, was about $70 ebay. Magnetic jaws, didnt think to use slitting saw, dam, i have one, hmm, cheers
@rickpalechuk44114 жыл бұрын
Nice build, thanks for sharing. Cheers
@HexenzirkelZuluhed2 жыл бұрын
You lathe seems much smarter than mine. I'll have to see how to get mine up to speed. Maybe show it this video to make it jealous? Good work!
@stevohdee81182 жыл бұрын
Haha.. minnie says thanks
@bunkerhunter754 жыл бұрын
Great job Steve!👍greetings from italy 🇮🇹
@stevohdee81184 жыл бұрын
Thanks Claudio, greetings from the other hemisphere, ciao
@mgirano58224 жыл бұрын
Thank you sir, greetings from France.
@innovationtime204 жыл бұрын
Super👍👍
@georgechambers31974 жыл бұрын
Steve, is there any kind of drawing available? I'd sure like to make a couple of those. My mini sure isn't as pushy as yours, well maybe she did want a full CNC upgrade. Thanks for the video!
@stevohdee81184 жыл бұрын
Sorry George, no drawing available but have suggested to a few people to take a screenshot off the paused video then print out. & Minnie ain't getting no cnc... She's too naughty!!
@cannonroberts51294 жыл бұрын
Nice 👍. Could you put a link to your drawing in the video description.
@stevohdee81184 жыл бұрын
Sorry cannon, I don't do links but maybe you can screenshot the drawing, crop, resize off the video?
@cannonroberts51294 жыл бұрын
Stevodee stevohdee would you be willing to snap a picture with a steel rule beside the drawing and email it?
@kemet-son4 жыл бұрын
Perfect 👌
@ironhead654 жыл бұрын
Would you do a video on your mods you've done to your lathe?
@stevohdee81184 жыл бұрын
Hey Dan, that's a good idea, now where did I put my tripod? cheers
@stevohdee81184 жыл бұрын
Hi Dan, do u realize my last vid was all your fault?
@ironhead654 жыл бұрын
@@stevohdee8118 I did not, but I thought it was such a wonderful topic! The vid was fantastic! I had to sharpen my pencil and about wore it to a nub taking notes! You have seemingly solved many of the issues that plague these little machines. You were spot on with "they are good, but are a project in themselves." I do love my little guy. Just need to change the bed for a larger one. I have the 7x10 (really 7x8). Saving my pennies for the LMS upgrade!
@stevohdee81184 жыл бұрын
@@ironhead65 haha, yeah these things are like a money pit.. Lots of toys for em, I think I've spent triple the cost of the lathe all up, about 1800 aus, I hate ebay haha... Good luck with Yr new bed, useful upgrade, Al the best, cheers
@iamtheomega4 жыл бұрын
kzbin.info/www/bejne/lZWniZqMiax8sLs Shop Clean Up With Focus Master And Special Guest 25,365 views•Aug 7, 2016
@bustednuckles23 жыл бұрын
This is probably the third time I have watched this and I still marvel at what you were able to accomplish with a POS Chineseium Mini Lathe. Minnie or no Minnie, using hand ground cutting tools no less. I also have to agree with another commenter about your free hand engraving skills. World Class there mate. So since it's still Christmas over here in The States, Merry Christmas to you sir . I'm wondering if you would consider sharing your hard earned skills and maybe record some quick tutorials on a couple of simple projects for relative newbies? That hand cut taper for the handle tells me you have been at this for quite a while. That isn't something even an apprentice is going to pull off without a lot of practice.
@stevohdee81183 жыл бұрын
Thanks Phil for your great message, I'm still learning stuff myself and I'm sure top machinists are huffing at my techniques haha. But we do what we can with whatever tools we have, I just enjoy figuring out how to do stuff. Got a neat little easy gadget vid almost done editing I think you'll enjoy, cheers mate & merry xmas
@eddietowers55954 жыл бұрын
Channel has awesome projects, great tool designs and cool editing but creepy AF. a disembodied voice that, quite honestly, seems to come off as a someone from a purposeful unseen hiding place, probably buried in a homemade dungeon, suffering Stockholm syndrome. I know it's a "skit"? I guess. Not everyone can be as funny as "This Old Tony". But, it's even a cooler channel on mute. Sorry, mate but...it is creepy.
@stevohdee81184 жыл бұрын
Thanks Eddie, but that's wot I intended haha... I mean hehehe