Auto Transmission Oil and Filter change (not flush)

Edit: Just over 5 ltrs was replaced not the 4ltrs mentioned in the video,
In this video I change the Auto transmission oil and filter on my 2010 GLX-R Mitsubishi Triton, As i change the oil every 30k a flush is not required unless the oil is in bad condition you will want to flush all the oil from the converter, I bought all the parts from Western Filters here in Sydney, check out their online store for all the parts available for your 4x4,
Transmission filter:
www.westernfil...
Transmission oil:
www.westernfil...
Please like, share and subscribe !!!
If you would like to promote your products or have them installed in one of our video's send a message to our facebook page @
Social Media :
/ servicemyride16
Find us on Instagram
@servicemyride
Disclaimer
The videos created by Service My Ride are for veiwing purposes only, No claims to be made against the company and or any person related to the company, any damage caused to veiwers property is not in any way the responsibility of the company Service My Ride. If the veiwer is not comfortable with any of the information in the videos they can contact Service My Ride or seek advice at their nearest qualified motor dealer.

[@Rumpole1000]

Honestly mate, Iv'e learnt more from your vids than reading the service manual.

[@rafaeldavidmarquezgautier2844]

hello , from Dominican Republic. I like your vídeos. 👍

[@ServiceMyRide]

Hello and thanks for watching, love how my videos are helping people and being watched all over the world. thanks for the comment 👍

[@karlschaumkel4834]

Hi mate does 2020 version have dipstick to fill from

[@KelvinWilson53]

So if my truck has no separate dipstick for ATF I can use the regular dipstick opening to fill the auto transmission?

[@LeftIsBest001]

No, if you have no ATF dipstick, the "regular" dipstick is for the Engine Oil. For example, my Falcon has no ATF dipstick, so it is refilled through the drain plug using a fluid pump to pump the transmission fluid in.

[@cbn5410]

Hello, how much oil did you use?

[@jayphillips2899]

Thank god for this site, out of necessity i have had to start doing my own maintenance and luckily for me its the same car. I’ve gone from knowing nothing really to changing the oil, changing my hoses and thought I’d give my Transmission a filter/fluid change. All went well but i now have the D light flashing after taking it around the corner. Any assistance you could offer to let me know what i have done wrong? Much appreciate any assistance!

[@ServiceMyRide]

Sounds like its an electrical issue somewhere, check out this link if its the same issue: kzbin.info/www/bejne/ZmmnkJeroMaNbpY

[@kyeophis]

hey mate I've got a 2006 ML triton can not find for the life of me how much fluid I should add it says 9.7L but there's no way it only dropped just over 4L. better to underfill or overfill? don't want to cause any damage long term

[@aussietravelduo]

Just put as much as you took out. Unless you pump it all out you won't remove the whole 9.7l

[@stevencondron9355]

How many ltrs did that take buddy

[@chancenuon2116]

Use a dremel and wire brush attachment and you'll clean that gasket material off in about 5-10mins

[@rave76]

Great vid, mines a manual so will need to look into how to change the oil in them :( also what about the diffs, would you change the oil in them and will it still be the same oil (atf) thanks mate yer a legend 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@rave76]

Forgot to mention my mitsubishi has 90,000 miles on the clock so looking at a compleat service lol done the oil n filters in the engine.

[@willsmith7168]

Sir, how many Atf you used. thank you Sir