AutoCAD 2011 - Tutorial 04

  Рет қаралды 112,368

cadeeze

cadeeze

Күн бұрын

Пікірлер: 42
@PAT3978
@PAT3978 12 жыл бұрын
Great videos here. Extremely thorough and slow enough to note key parts. Great Job!
@Wisetravelor
@Wisetravelor 13 жыл бұрын
Hi, I am from Saudi Arabia, Middle East. I just want to say thank you man for the hard work and excellent description you show. maybe you do not know but you are doing a big favor to me thank you very much.
@LegoBeto
@LegoBeto 11 жыл бұрын
If you go to the Annotate Ribbon, click on the little --> arrow in the Dimensions section, you'll open the Dimension Style Manager dialogue box. There is a button called Modify which you will click on as well which will bring up the Modify Dimension Style Standard dialogue box, from there go to the Primary Units Tab and change the Unit Format in the drop down box. Yes there are several steps but you can get used to that with practice.
@JanGudme
@JanGudme 13 жыл бұрын
@maniaustralian did you try using a "," instead of the "."?
@TheGinyu4ce
@TheGinyu4ce 12 жыл бұрын
This is exactly what I needed, thanks man.
@johnchristianfraser
@johnchristianfraser 13 жыл бұрын
@lidoz I don't think you get what I'm saying. When you say TAB and enter 90 degrees to go straight up, that 90 degrees is in RELATION TO THE X AXIS. Say I want 85 degrees from my last line (just off perpendicular), but my line is already on a downward slope of 35 degrees below horizontal; Am I expected to do the math and go 180-35= 145, 145-85= 60 and type a command for my line length @ 60 degrees? The only shortcut I found was to rotate w/ copy and it gives me the annotated angle between.
@addagucyetmez573
@addagucyetmez573 11 жыл бұрын
your tutorials are anazing. thank you very much.
@johnchristianfraser
@johnchristianfraser 13 жыл бұрын
How do you produce a line with a known distance at a specific angle RELATIVE TO THE LAST LINE YOU DREW (and not relative to the x axis)? It seems primitive to have to take out your calculator and trace the angle back from your last known angle from x-axis.
@lidoz
@lidoz 13 жыл бұрын
@radumbm each page is defined in presetting with different parameters. So first see what are you page units it could be already in mm. Or start a new one and click on autocad icon topleft, then go to drawing utilities and define ur units, ft, m, or mm... that works for me
@radumbm
@radumbm 13 жыл бұрын
How are the units expresed?how much should i write in the command for a line of..let's say 10 mm(millimeters)?
@steveho4239
@steveho4239 11 жыл бұрын
Really nice video . Thanks
@shivaji457
@shivaji457 12 жыл бұрын
the direct distance entry does not work for me. I specify the point and enter the length of line but it does not work.The line keeps on extending.help me with that..reply.....
@theblackdahlia88
@theblackdahlia88 13 жыл бұрын
@haymarketfreeride it's kinda strange considering they have a 22.5 in the preset angles!..
@Aloosh12
@Aloosh12 12 жыл бұрын
bro can u tell us howd u arrange ure grid before we start anything and this zoom thing...
@maniaustralian
@maniaustralian 13 жыл бұрын
thanku for uploaling but i tried to add 12.5 angel in my settings but it does not come up. can you giv me bit more information about that plzzzzzzzzz why 12.5 is not coming as an angel to my settings.
@ionutalex7347
@ionutalex7347 11 жыл бұрын
in the bottom left read your coordinates if they are in the order of 1000 units and u want to draw a line that is 10 units ull only get a dot so... try zooming in:D
@lidoz
@lidoz 13 жыл бұрын
@johnchristianfraser Make the 1st line, or any line you want. (remove auto snap and all this on the bottom). Then as you are ready to define the second point on the second line with the mouse, dont click anywhere, instead type the distance lets say 100ft, then press TAB then you can type the angle where 90degrees is vertically up then hit enter and ur done! Having the dynamic input makes it easier to see. good luck!
@Mist9879
@Mist9879 12 жыл бұрын
how many cm's is one unit?
@LiminalLofi
@LiminalLofi 13 жыл бұрын
p's sound good to me. keep up the vid. Thanks mate
@BretANewman
@BretANewman 11 жыл бұрын
Hello all, If you allow the commercial to play, I believe cadeeze receives a small amount of money from the advertiser so, you should allow it to play if you like what you are viewing!
@fedora657
@fedora657 13 жыл бұрын
Note, if you watch these drunk, you usually end up rewatching them hungover...
@matthewnaing2621
@matthewnaing2621 11 жыл бұрын
i like to lean more for pay the course fee how can i do that
@PROsec5
@PROsec5 14 жыл бұрын
Very good video thanks.
@mauriciocastro6723
@mauriciocastro6723 9 жыл бұрын
buenas tardes es un tutorial muy interesante.
@jakalii
@jakalii 13 жыл бұрын
thank you so much good job
@KushPizzaSleep
@KushPizzaSleep 11 жыл бұрын
I TYPE in 10 and nothing happens? any idea why?
@BisdremisKostas
@BisdremisKostas 9 жыл бұрын
+KushPizzaSleep check your scale ... if you zoom in
@haymarketfreeride
@haymarketfreeride 13 жыл бұрын
Hmm, AutoCAD for Mac doesn't allow you to enter a "." in the polar tracking settings! That's not very good....
@thegurushikshacmsir2464
@thegurushikshacmsir2464 9 жыл бұрын
thanks u very much thats u help up foe teaching
@MrDreday1976
@MrDreday1976 10 жыл бұрын
good one. thanks
@vanturkey
@vanturkey 12 жыл бұрын
Thank You Very Much Sir
@johnchristianfraser
@johnchristianfraser 13 жыл бұрын
@lidoz Just saw this other response. I'll try that and see what happens
@themonoys
@themonoys 11 жыл бұрын
Thank u so much
@PhibeRCoRe
@PhibeRCoRe 13 жыл бұрын
Damn, you are fuckin awesome. So easy to keep up.
@maniaustralian
@maniaustralian 13 жыл бұрын
very nice
@SweetHomeSalalah
@SweetHomeSalalah 10 жыл бұрын
thank u very much my new job requires geography mapping by using GPS coordinates points and apply them on auto-cat could you plz show how it works best regards,,
@lidoz
@lidoz 13 жыл бұрын
@lidoz remove the polar tracking..
@gil12345ish
@gil12345ish 13 жыл бұрын
godbless u
@MineMyMachine
@MineMyMachine 12 жыл бұрын
yes it does lol...it's the featured video
@RiyaSharma-xh7ic
@RiyaSharma-xh7ic 11 жыл бұрын
my lady auto cad teacher is a bitch , this man is Awesome !!
@RAGHAVULU1963
@RAGHAVULU1963 13 жыл бұрын
average
AutoCAD 2011 - Tutorial 03
13:42
cadeeze
Рет қаралды 116 М.
AutoCAD 2011 - Tutorial 01
14:52
cadeeze
Рет қаралды 551 М.
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
AutoCAD 2011 - Tutorial 02
13:50
cadeeze
Рет қаралды 169 М.
AutoCAD 2011 - Tutorial 05
14:53
cadeeze
Рет қаралды 99 М.
AutoCAD 2011 - Tutorial 07
13:08
cadeeze
Рет қаралды 187 М.
AutoCAD 2008 - Tutorial 03
9:57
cadeeze
Рет қаралды 305 М.
AutoCAD 2011 - Tutorial 09
14:05
cadeeze
Рет қаралды 74 М.
AutoCAD 2008 - Tutorial 07
9:55
cadeeze
Рет қаралды 167 М.
Basic AutoCAD Floor Plan - Part 1
14:53
jeremytf77
Рет қаралды 522 М.
AutoCAD 2011 - Tutorial 06
10:20
cadeeze
Рет қаралды 81 М.
AutoCAD 2011 - Tutorial 08
12:36
cadeeze
Рет қаралды 83 М.
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН