AUTOCAD 3D HOUSE | MAKING 3D DOORS

This video demonstrates the steps involved to make a 3D door .
#autocad #autocadtutorial #tutorial #cadcam #3dwall #3dwalkthrough #3dmodeling #3ddrawing #3dhousedesign #sabeercad #3ddoordesigns
You can also follow me on my facebook page by liking this page
autocadtutorials4all
Also join my facebook user group "Autocad users"

[@istoryaheeeee]

You're the man Sir! Thank you for sharing your knowledge. I've learned a lot and kept on replaying from time to time to be familiar with the techniques you used. Especially those shortcuts. Please don't get tired of what you are doing now. You have helped a lot of people in so many ways. A real essence of a great instructor!

[@rafikmulla5487]

Sir your explanation of AutoCAD is super

[@sabeercad]

Thank you 😊👍

[@sabeercad]

I am planning to upload . Please wait for it

[@alfredotieno8012]

this so wonderful,,thank you,may you lead me on how to draw 3d roofs

[@jojoestadilla7863]

Sir, Thanks for your videos. It's very clear and easy to follows...more power to you.

[@sabeercad]

+Jojo Estadilla Thanks for your comment 👍☺

[@MotionXE]

Subscribed, I'm learning AutoCAD now because I'm new to it. :D

[@sabeercad]

All the Best :) You can visit www.vtc.internshala.com/signup/course_details.php?course=autocad101 to learn AutoCAD better

[@MotionXE]

Thanks, you don't even know how much this helps me :D

[@hubertherbert4607]

Hi, thank you for the lesson, is the Site free? Thank you!

[@Trixie65]

I learned frm u a lot. Can u teach us until complete door ? Now I have followed ur instruction but my door is stop as halfway only. :( Thanks!

[@sabeercad]

It is a complete door model . If you want to see the door with proper finish , you should take a the file to 3DSMAX . Please visit my site htt://sabeercad.teachable.com to learn 3DSMAX online . Thanks for your comment

[@arunangshumandal2065]

what is the ucs settings for this door planning?

[@madhvi0227]

it's very helpful for me thank u so much

[@FouadELHOUSNA]

wow the way that you make this tutorial so easy & so good , learning a lottt from this , great work sir , thanks a lottt , waiting for more lessons please .

[@sabeercad]

Thanks...

[@ramon3kgt]

So i make the door frame and it wont offset unless one of the vertical portions is a crooked line. Once i join the poly lines and use the extrude commands when switching to shaded or any other view the frame is see through. I am trying to complete this by tomorrow for a autocad beginners project but i doubt I will get too far and I am afraid I will have nothing to turn in. Thanks for any help you can assist me with.

[@hollyemptage931]

Excellent Tutorial, I wish you were my cad tutor. Can I just ask if i want to create an interior sectional perspective of a single room is it best to draw in auto cad in 3D then import into studio max to render or is it better to import a 2d autocad file then extrude the walls in studio max?

[@elimams]

Dear Sabeer. Thanks for your reply, it worked beautifully. Now everything is ok however what about sliding windows and double leaf doors. How to design them

[@sabeercad]

I have plans to post tutorials on these topics on a later stage...

[@elimams]

sabeercad Then I am stuck

[@viju691522]

I can't draw a polyline vertically and my friend can draw this in his lap but he can't offset that polyline. Kindly advise me in this issues.

[@sabeercad]

The problem may be with UCS. You can align it with the view plane before you start a Polyline

[@zlajatube]

excellent, how to change width and high of that finished 3d doors in a most simple way?

[@oNLyONEofUS...]

Hello....first...thanks for this lessons......i have problem with pline command.......when i want to draw pline for some objects....my line is like big large stripe.....why is it working like that????

[@sabeercad]

Go to Pline, width option and set it at 0.

[@misbashaikh4226]

I'm learning AutoCAD now

[@shalinimundra3042]

If you want to learn more software u can contact on [phone].. from basic to advance

[@joelcampo7805]

why does my polyline can't drag upward to the direction of the door? it remains in the bottom plane?

[@nickyambao834]

In tracing the outline of the door what command did you use it is poly line or 3d polyline? I cant use polyline because it wont elevate but when I use 3d polyline the object cannot be offset. ?

[@sabeercad]

First bring the UCS to the required plane and then use PLINE command ...

[@ameerjaafar9376]

+sabeercad How do i do that sabeer? i use cad 2014 and when i use polyline a phase is selected when i move the cursor so i can't click on the endpoint i want to work on ... if i need to work on x axis, polyline only works if x axis is selected the UCS automatically selected and i have hard time to finish it its taking hours

[@potpotpotpot29]

sir I was having a problem tracing the polyline in the door. first i thought it was just with the ucs. so, I change the orientation of the ucs same to yours. but as i was tracing the door it wont snap to the endpoint of the z axis. can you help please?. or is it a graphic problem of my computer? please help sir I cant continue with ur tut with this problem. thanks. sorry for the bad english

[@potpotpotpot29]

paperroses Papercut ow its ok now. ucs problem. great tutorial

[@sabeercad]

Your english is good . The problem may be dynamic UCS . Just deactive DUCS before you draw the polyline .

[@chragvvoraa8050]

Sir, I have a problem. When i try to draw a poly line for the door, the line is not getting drawn on the edges of the door..i dont knw what to do? I tried drawing individual lines and joining them but they are also not getting joined..please help!!

[@sabeercad]

OSNAP should be on when u do this . The UCS should also be on the same plane ...

[@glaysersepagan8819]

thanks for the upload,sir what ucs you use

[@ghassanjenainaty4212]

where is the part in which part of the door is designed through 3dmax please?

[@sabeercad]

It is included in a course in 3dsmax. Please check sabeercad.teachable.com

[@qamarzafar4826]

There is no use of ucs icon I have to change all time Can u give suggestion?? Wht should I do

[@sabeercad]

You can turn off Dynamic UCS (at the status bar below ) when you try this.

[@phoclan08]

When I tried to join the polylines, I got an error saying " 1 was not parallel to the UCS". So I used "flatten" command to make them work join, but they became to 2D objects right after. How should I approach this problem?

[@sujonahammed9045]

1st part please...

[@AbhishekSingh-hc1ne]

it is difficult to offset how can i give side while offsetting ? i notice there is directions on cross air how can i get that

[@TheSandipstar]

hi sir, How UCS icon i sticking with courser please ?

[@sabeercad]

Give UCS command , Choose Face option and click on a particular face

[@TheSandipstar]

@@sabeercad Thank u sir But when you moving corsour It's moving together. On your tutorial vedio.

[@kashifkamaal9335]

sir i can't make the door when i try to join the various lines in pedit it shoows 1 is not parallel to ucs and 1 is on fixed layer. Please help me sir if it didn't work then i can't extrude it and i will be stucked

[@rohanojha2065]

sir, in this video, i did not understood how to remove the polyline below the door

[@sabeercad]

You can activate selection Cycling in the status area (in the bottom) and select the polyline

[@zareenremendies]

excellent

[@ankurjain5250]

I did not understood that how you make the door how you make the polyline on the door's periphery, Was it PLINE or 3D PLINE i got confused.

[@sabeercad]

Its PLINE . Just follow video step by step . You will get the result

[@ASIFSHAH-pc1mw]

hello sir plz tell me how i can print out jpg files or pdf files autocad 3d modeling.. .

[@ankurjain5250]

Sir, Again I am confused that how can select the plane in which I want to crate the profile.

[@kidsplayground8100]

hello sir ,i m not able to draw horrizontal 3d surfaces with extrude and presspull command,when i try it goes in upward direction (3d surfaces) pls sir help me

[@sabeercad]

+adilahmad teli Make sure that the profile is closed . Use PEDIT command to check this . If the first option is CLOSE , it's an open polyline . Then give Close to close it . If the extrusion is going upwards , give a negative value for extrusion

[@kidsplayground8100]

sabeercad sir i tried that but not working,as i have to do moulding arround the parapet wall ,it goes in other direction ,as i fallow your all steps ,i give path also

[@chandermanithakur3604]

development..............................

[@chavanaveen]

sir please upload how to design 3d door in 3ds max

[@arunangshumandal2065]

what is the ucs settings for this door plan??

[@sabeercad]

+ARUN MANDAL Keep the UCS on the wall face using the face option of UCS command

[@ahmadelmoawn5478]

thank you

[@sabeercad]

Thanks :) Recommend my channel to your friends and tell them to Subscribe to it

[@adeelshabbir3160]

awesome!

[@sabeercad]

Thank you

[@pakistanitraveler842]

nice

[@thankgodahubaraezeama7536]

great!

[@sabeercad]

Thanks ...

[@abisheka355]

the line i drawn is in air it is not attaching to the door

[@valappan77]

sir i'am un educated gay but i intrest to lern auto cad! how i can find the first step from your canal ( tutorial class) ? now I'am droning with sketch up (mac software ) i have auto cad 2013 mac vergin pleas help me sir

[@azizali6080]

thankyou

[@abisheka355]

i cant draw door using polyline in 3d view!!!the line i draw coming on the floor of the house

[@qamarzafar4826]

Because of ucs

[@tombelmonte2502]

cool!

[@nayabkhan6130]

Nice English thnx

[@sabeercad]

Indian English :)

[@abisheka355]

Are you a malayali?

[@jeanpierrenkinzi7899]

YOUR LESSONTRANSLATE IN FRANCH PLEASE SIR

[@ajayjethva1531]

saras!

[@OnThaGo]

isomatik drawing

[@rayans2748]

🖒

[@Anamul-Hassan-Shoraim]

Extremely disappointed. Wich door you create that does not adjust on the title photo.

[@venkateshg4315]

door frame design you should not said in that video

[@sabeercad]

+venkatesh G The video deals with creation of various elements of a door ☺

[@EngMushtaqtech]

hi

[@OnThaGo]

nice