AutoCAD 3D Loft Command Tutorial Complete | AutoCAD Loft Path | AutoCAD Loft Guides

[@rashid_Johny_Cyrus]

Heyyyyyyyyyyyyy You the best teacher for this area.........

[@CADCAMTutorials]

Glad you think so! 😊

[@bluetorch13]

English not being your primary language makes your explanations SUPER EASY to understand, English is also my secondary language and all your tutorials are excellent and simple! Thank you very much!

[@wamanwell-being2470]

I want to thank you sir from bottom of my heart.... It's because of you today I'm working in design in a Defence Company....

[@CADCAMTutorials]

You are welcome

[@yashgautam4874]

Where are you working brother

[@martinsomers8730]

@@yashgautam4874 In a Defence Company....

[@dhanalakshmiramamoorthy4824]

Tell name of the company

[@simpernchong]

I have used AutoCAD for more than 2 decades. Nice to see it still going strong.

[@wf.d5076]

THIS WAS SUCH AN EXCELLENT GUIDE

[@CADCAMTutorials]

Thank you 😊❤️

[@balaramkona4717]

nice explaining sir thanks for supporting poor people like me,. we don't have to pay more amounts for training - i can start learning from your videos

[@CADCAMTutorials]

You're welcome 😊

[@claudiajanzen2564]

Thank you sir, your tutorials are easy and straight to the point! Now I'm a fan of this channel! =)

[@CADCAMTutorials]

You're welcome 😊

[@fayelanx3638]

I AM IN LOVE WITH YOU MARRY ME OMG YOU JUST SAVED MY PROJECT AND MY SANITY 😭🙏

[@kovabhuma]

Explanation is very clearly thank you so much 😊

[@nipambarman3221]

This is so amazing that how u teach these tutorials in an easy way. ❤️

[@CADCAMTutorials]

Thank you

[@rowanmurphy5239]

Incredible! You may have saved a project of mine that was defeating me!

[@CADCAMTutorials]

Glad I could help!

[@chandrakantjoshi.449]

3D Loft command is explained in very simple method.👌👌👍

[@CADCAMTutorials]

Thank you 😊. Please subscribe to get new video notificatio.

[@ALAMKHAN_001]

Bahut khub ❤️

[@CADCAMTutorials]

Thank you 😊

[@rocky8004]

Superb teaching sir ji

[@Fededilollo]

You deserve a medal, thanks.

[@CADCAMTutorials]

You are welcome

[@dinogart2979]

Thank you very much sir, I'm from Indonesia

[@mohamadzfr]

Such a great tutor 👍 Thank you so much broader 🙌

[@shanisahani2284]

great teaching n skills of autocad ...😍

[@mdfaiyazuddin7738]

Raj Sir it reminds me of your class in the very beginning

[@veeramareddisravani9743]

Perfect explanation and thank u

[@CADCAMTutorials]

You're welcome 😊

[@sajjad3865]

You are best my teacher!

[@CADCAMTutorials]

Thank you

[@josephsegador641]

thank you for this video and its very appreciated to me for easy way

[@paulocintra7941]

Muito bom !Bem explicado, excelente exemplo de aplicação , ótima explanação e conclusão.Felicidades a todos .

[@nazikmohamed]

Good Example for using loft command in solidworks,Thank you

[@squirrelspown]

wow thank you great tutorial

[@CADCAMTutorials]

You're welcome 😊

[@sadicoutinho581]

Muito boa aula continua assim Deus t abencoe

[@CADCAMTutorials]

Claro, obrigado

[@edmondo.6004]

Good & amazing tutorial. Thank you so much!

[@CADCAMTutorials]

You are welcome

[@EngineerWaelAhmed]

جزاك الله خير ياخوي شرح سهل وسريع وسلس

[@nihalyusifova1582]

Excellent thanks 🙂

[@CADCAMTutorials]

You're welcome 😊

[@frarukabdulla7699]

Superb 👌👌👌

[@mrnomore]

Thanx. is there no Twist for Loft?

[@shreekatte]

Sir when i give path the line which is created by loft erases out. May I know why?

[@ayzrock]

thanks for the tutorial!!

[@CADCAMTutorials]

You're welcome 😊

[@chunkynugget]

Great video! Explained really well.

[@richiekong6843]

Thank you ❤❤❤

[@robertopascazi228]

EXCELENT!!!! Thanks a lot.

[@CADCAMTutorials]

You're welcome 😊

[@andrei9115]

Yeah sure! It looks so easy when you master are doing it but in practice is much more difficult when it comes to spline! Loft command is maybe the easiest and most straightforward 3d command but when you have to extrude or loft on a path is very difficult when you have to change the XY plane in space. I found the easiest method to be the new ucs, then select x and y axis according to the plan you want to draw into because this way you will have only two axis to look after and dont have to pay attention to the z axis, using left, right, front, back...etc looks much more difficult to me! I am just a beginner in AUTOCAD btw and the extrude/sweep along a path seemed the most difficult thing to me so far! Nevertheless you are a genious! Can I email you a 2d plan building which made my Autocad crash in 2 versions (2017 and 2021) when I tried to press pull the windows? I've tried it on my desktop as well and autocad froze again, the drawing is pretty simple with only 4 rooms, I dont know why Autocad is acting like this. Maybe you can help me figure it out. Thanks alot in advance! Keep up with the good work!!

[@haidartaher17]

May be it's too late as a response, but I think you to make sure that all the 2d drawing areas are fully closed using boundary command, then make sure that z axis is in extrude direction using ucs command.

[@Gustav_S_eyes]

Thank you 🙏🙏

[@calciomercato_news]

Gooooood... From Italy

[@CADCAMTutorials]

Thank you 😊. Please subscribe to get new video notification.

[@malemalevich2672]

Ору с этого акцента. Индусы - топ!

[@amarkant268]

5:00 after selecting path it say not valid.. What should i do now

[@CADCAMTutorials]

Don't use very complicated path

[@shumailkhan6078]

Very helpful 👍

[@babaymukherjee3119]

Thanks sir 🙏

[@CADCAMTutorials]

You're welcome 😊

[@gussindra9378]

Good illustration

[@omarcornette7999]

thank you so much

[@CADCAMTutorials]

You're welcome 😊

[@agnwstos2222]

Perfect. Helpful

[@CADCAMTutorials]

Thank you 😊

[@lach0125]

great video

[@CADCAMTutorials]

Thank you 😊

[@melvinhampton9029]

Very well young man

[@CADCAMTutorials]

Thank you.

[@bigcaschrisannsolsona2236]

Thankyouuu 😊

[@CADCAMTutorials]

You're welcome 😊

[@alicaliskan1685]

Thank you very much...

[@waiyanlinn8573]

Thank you , sir

[@Yavuz866]

Thank you a lot !!!

[@CADCAMTutorials]

You are welcome 😊

[@RajeshKumar-yh4dq]

Please make more videos in solidworks and catia

[@samiranjana2083]

can you tell me sir why, I cannot make object like you ,it is showing--" The selected entities are not valid, "

[@carloscorreia7700]

when is good, is good!! TK

[@iktita]

good one my friend

[@NicolaeComan]

I cannot do command LOFT over a path. It appears "Selected entities are not valid." What is wrong?

[@NicolaeComan]

Oh, I see! I've forgotten to JOIN the portions of the path.

[@deaftodd]

Which windows version are you using?

[@CADCAMTutorials]

Windows 7

[@sahilchhapola1125]

sir esme jo rectangular lofted part h uska devlopment kese bnega

[@CADCAMTutorials]

Uskeliye aap ko solidworks ya phir dusara 3D software use karna padega kzbin.info/www/bejne/d5fTiYeKnpWFbbc

[@sahilchhapola1125]

@@CADCAMTutorials sir two step lofted and only rectangular shape not circle

[@habibacil7716]

Hi, How do you join or unite 3D array with 3D solid object?

[@CADCAMTutorials]

Use UNION command

[@habibacil7716]

@@CADCAMTutorials does not work, I tried union, join but nothing. it says "at 2 solids, surfaces, coplanar regions must be selected"

[@CADCAMTutorials]

Explode 3D array and Union

[@habibacil7716]

@@CADCAMTutorials sorry to bother you but still it does not work. is there any other way?

[@nakiryajustine3841]

I SOMEHOW FAILED ON THE SHELL COMMAND. BUT I HOPE FOR THE BEST AS I PRACTICE MORE

[@mech0797]

Bro please make videos about CNC simulation

[@nma6813]

Thanks to much

[@rayansaab968]

good keep going

[@purestress2597]

Pretty clever tool.

[@debedabkilen2786]

path and guides doesnt work for me. btw im using 2012 version

[@CADCAMTutorials]

Try to create less complicated path and smaller section.

[@bb8219]

Ty❤❤❤

[@jeaacuesta5063]

Why mine doesn't have shadow when I used loft command

[@joaohenriquevolpinimattos5117]

How to control the surface density in LOFT command ?

[@dodouniquelife9725]

How to Find These Volumes???

[@arielsharon8694]

Thanks

[@CADCAMTutorials]

You are welcome

[@blacknote5022]

Good

[@christopherbrown5338]

As the rest of the world is using parametric software

[@Loveanimals193]

Can you l Teach me AutoCAD ?

[@vijaysinhchauhan8696]

Tanks

[@vasudeokatdare6530]

Good !!

[@CADCAMTutorials]

Thank you

[@Squalettoblu75]

eccellente

[@CADCAMTutorials]

+Squaletto blu Thank you

[@shrikantbidgar7132]

Wow

[@CADCAMTutorials]

Thank you

[@mistervictor9078]

ГОСПОДИ ХРАНИ ИНДУСОВ

[@aminsaputra7134]

CONTOLL

[@RameshSoni-cq7gm]

Thanks

[@True-v3u]

thanks

[@bhuvaneshd7143]

Thanks