AutoCAD 3D practice drawing: Pipe Joint

[@sourcecad]

Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/

[@mrrandyleighton]

Thank you for the tutorial. I have to say that I really appreciate that you talk during your tutorials instead of playing music. Having you actually explain what you are doing is invaluable. Most tutorials are basically worthless because you are just watching someone create an object with no idea what they are doing or why. I love that you explain why things are done the way they are! Thank you so much.

[@danielteyehuago1633]

Please should have added dimensions to the actual drawings for it to be simple for us... Also try change the to vertical so that you can draw at one side and the image at the other side too... it made it easy to follow and understand

[@Songoku-ov1gr]

Jay, another amazing tutorial. Your've managed to introduce quite a few elegant techniques available in 3D ACAD all into this single tutorial. I'm going to have to replay this lesson several times to remember and practise them all. Well done.

[@sourcecad]

Thanks Songoku

[@samyyoussef8380]

Really outstanding tutor and tutorial ; thank you for sharing your knowledge

[@corporallee44]

Very clear instructions AGAIN, thank you.

[@GritChallenger71]

I have doubt in flange part 1:30 where you took length 49 after 32, how did you calculate it since I cannot understand from orthographic drawing given in pdf from your site?

[@pavankumarpk1997]

i will kearn more and more from these videos ,thank u.

[@PraveenKumar-il6ug]

Can you explain how you put the length 49 for above distance I can't understand that 49 length and also the rectangle distance 45 from the center

[@alshomary76]

Very nice drawing excellent ......

[@nurhasmizaibrahim7890]

Tq for your smart tutorial..

[@Brisbane_Balki]

Hi Thanks for showing a good tutorial video. Much appreciate, if you can show the draft settings too.

[@dvand8158]

I cannot thicken the rounded part..1 surface selected, press enter and it goes out thicken mode

[@Tacio_Fernandes]

Very well explained!

[@siddiquishoaib7929]

good tutorial thanks for efforts.

[@akemanyigallus102]

you are wonderful

[@gentillice]

thank you very much

[@suniljanwa]

Hi ! I learned a lot from your video tutorial.Thanks for uploading such videos. In above video I want to learn about surface associativity and NURBS creation in surface tools. What is the differance between these two.pls explain

[@papillonbougie7080]

please could you put a pdf of the drawing so someone can try before watching the video .thanks

[@Jcreates]

do you have dwg file for this?

[@dexterslab2966]

what template should I select before I can start my drawing?

[@petrusbenckey]

What do you mean?

[@pratikkerkar1793]

3d modelling in settings

[@Aaron-r9x]

I do not understand how do you make for thicken. luego de extruir el circulo obtengo una barra solida en forma de U por eso creo que cuando yo lo voy a engrosar no me lo permite porque tengo una barra solida y no una superficie. podrias explicarme como lo haces. 3:05 al 3:15min

[@petrusbenckey]

You have to select the command "Sweep" in surface tab and not in home tab,after you can "thicken" it.@t can see at the minute @. Tienes que seleccionar el comando "Sweep" en la pestaña de superficie y no en la pestaña de inicio, después de poder "engrosarlo".Como se puede ver en el minuto 2:16.

[@iknowemjay5506]

thank you so much :)

[@joaquinmercado4085]

when i use sweep, the outcome on my end is not identical to what was presented on your video

[@bharatbeldar6921]

Any website for online work,autocad nd solidwork

[@0010-g9o]

Ask for this autocad softward, cant I use picture ( JPEG FILE ) drawing out the typical material ? FOR scale 1 : 1 or scale 1 : 10 Answer, Can. Ask If can open music to drawn this typical materials ? Answer, Can. Please reply this email between 5 to 14 working days to process. I, moi ling need apologies for any inconvenience caused, Hope your superbowl soul and heart. .

[@Smhossa1n]

hay bro, when I use a thick command in auto cad select object press enter it told me no surface selected, that's why can't thick surface. plz, tell me any solution for this man!

[@joaquinmercado4085]

i have the same problem, do you know what to do?

[@phinoex1936]

how did you fix yours?

[@AK69dj]

i cant revolve the block on 2:44.. when i press revolve and select object, then select start/end point it says can't revolve selected objects orso.. what do i do?

[@AK69dj]

Already found out myself... i didn't had ortho on, so my 188 line was not in 180 degrees downwards... so the midline of the sweep was not on 180 degrees with my line downwards.. bit hard to explain..

[@SarveshYadav-vn8tg]

I cannot slice the the object, please tell me how to slice the object

[@sourcecad]

Can you specify the time in video where you are facing this issue?

[@SarveshYadav-vn8tg]

I found that issue at 4:33

[@sourcecad]

It is difficult to tell the exact reason for this error. It should work as long as you use same dimensions as I have used in the video.

[@jeffstone2601]

me too

[@robinsonsaez3580]

When I select Thicken, the command returns a message: "1 was filtered out, No surfaces selected". Min 3:15. Could you help me?

[@petrusbenckey]

You have to select the command "Sweep" in surface tab and not in home tab,after you can "thicken" it.As can see at the minute 2:16.

[@abhisheksharma8920]

SourceCAD i need help . i am following your free course of practice drawings but i feel that dimension are missing in pdf i downloaded from below video in your free course (zip file actually ) . because i cant complete drawing by just pdf i have o watch the video to see dimension :( so for me this aint pratice its copy pasting :(

[@sourcecad]

I will update missing dimensions in the PDF soon along with more videos, stay tuned.

[@abhisheksharma8920]

thanks i thought i must be really dumb in maths :P

[@suniljanwa]

I downloaded zip file of above video today but dimension is not updated yet.

[@karthickchandrasekaran6726]

looks tough for me coz im a beginner

[@sauravdutta3485]

i do this

[@nayabmjts]

how I explode urdu text in autocad

[@sourcecad]

Use TXTEXP command

[@nayabmjts]

But the text appear all character seperate

[@nayabmjts]

How I will fix this

[@sourcecad]

yes it will appear separate, you have clean the extra geometries using overkill command and then join the remaining segments.

[@nayabmjts]

But how I join ع ث م ا ن instead of عثمان