AutoCAD Basics - Edit Dimensions (Simple Tutorial!!) PART 1

[@CADinblack]

Don't miss the Playlist: Dimension Lines (There are 6 videos). kzbin.info/www/bejne/ZonGmGajibKEa5Y

[@aeronm9679]

thank you very much. I can't believe there is only your video that can explain things straight into the points. I can play the video and follow along at the same time. Good pace. Not too long, not too short, and most importantly, get it right.

[@CADinblack]

I am glad you are happy with this tutorial Aeron!

[@Paidaisi_Engineer]

This is the first video which I like the most about Autocad. Thanks Admin

[@vinodyadav-vc8zz]

Thank you I have searched for this but u gave me the final solution

[@andre101a]

I've learnt so much from your videos. So clear, concise and very informative. Keep up the good work dude 👊🏻

[@laureenkamaishah1676]

For the first time, I understood perfectly. God bless

[@CADinblack]

I am gald it helped Laureen!

[@RB3565]

This was beautiful!! Short, clear and precise presentation!! Thank you so much sir!

[@CADinblack]

Thanks a lot for your appreciation. I wish you to keep learning :)

[@MdAsrafulAlam-l6e]

Hi sir i am from Bangladesh i watching your tutorial continue it’s very helpful tutorial thanks...

[@dmoy475]

Absolutely brilliant tutorial. Perfectly understandable and patiently presented - Thank you

[@CADinblack]

Thank you very much +Bespoke Jewellery

[@ljose007]

Thank you very much for taking the time to create this great presentation.

[@jaipalade1201]

Hii bro

[@sagarmahato3632]

Thanks you so much..I completed my floor plan design but when I dimension it the text size was very small..you help me solved this ...

[@wilhelmhesse1348]

Excellent explanation, thank you very much 💯🙏

[@ChristianIyalla_]

thanks so much, i was also doing a floor plan drawing and completely forgot how to do dimensioning.

[@fauzias6433]

When your lecturer says you can ask her anything but when you do ask her she says you're not paying attention... -_- so I need to check KZbin for videos like these!

[@CADinblack]

Thank you very much for watching Fauzia!

[@JoseRodriguez-op4fp]

Thank you the only person to help with this

[@CADinblack]

I am glad you enjoyed the explanation +Vyben361

[@KushalCineArch]

HELPED A LOT I WAS FRUSTATED FROM THIS , THANKS FFOT THE FIX

[@CADinblack]

Thank you very much +Kushal Patil

[@raceout]

Saved me hours of time! Thank you so much :)

[@muhammedg.habeeb4868]

great video mate keep up the good work bro

[@calvinsymss1989]

Could you explain the scale factor and why you used 0.001?

[@JTCAD]

one of the best video on this topic good work

[@CADinblack]

Thanks a lot +Jamil Tayyab (‫طيب‬‎)

[@vishvajitjanjal6137]

Excellent video bro thx. For lot of help.

[@CADinblack]

Hello Vishvajit! Keep practicing and thanks for watching.

[@DUCATI13241]

thanks bro and your video ,viewers easily understand by the way you teaching us slowly and understandable your video answers all my questions.as a beginner you're really are a pro

[@freshlemonsandpolice]

To the point and very clearly explained. Thank you

[@thinq3388]

A life saver, you are

[@xyzabc2845]

Whenever I try to draw a line from an intersection or from the end of another line, I don't get the endpoints showing in green symbol, even though my ortho is on and osnap everything is tick marked. From the same endpoint which is not showing I'm not able to draw another line too. Some lines dimensions can be marked some can't, how? What to do?

[@maricarmenvargas7313]

Thanks for a great tutorial, clear and easy to understand.

[@AnilSharma-wm1ip]

Thanks Mr. It was very helpful 🤗🤗🤗

[@CADinblack]

I am glad it help you Anil

[@123rockstar2010]

Thanks, this is very useful. In 2:38 that should have been 3.28m. 😄 No worries, the factor is correct "0.001" 👍🏼

[@mahfuzurrahmansakib512]

Can u help with one thing plz? I don't have that *Iso 25* in dimension style 0:56. Do u any way of bringing that Iso 25?

[@shubhadakaturezode9181]

Thankyou..this helped me a lot. You explain it very simple way. Can you please explain how to decide the scale for printing layout and also how to decide the text height?

[@CADinblack]

Hi +Shubhada Zode. Thanks for your appreciation. To set up the scale you can go to your layout tab, and them to the botton-right corner. I explain all the steps to print a drawing in this video: kzbin.info/www/bejne/fKq8hpKheNp1rZI&index=17&list=PLe_I-JWckL7G_ud-bYa6vrmM-LnFNpPC- To choose the text hight, follow this process: kzbin.info/www/bejne/i3zTdHmPjLBqp5Y Click in "single line text" Click in a point of the screen. Then you have to insert the text high and the direction. It is a bit tricky at first time. If you watch the explanation in the video you may understand.

[@terrilarios1048]

You saved me!!! Thank you! I couldn't figure out why my dimensions were not showing up! The type was so small I couldn't see it..

[@nideshkhobragade8284]

Wow, your explanation is soo great

[@jasonhuang4333]

Thank you sir! You are so helpful.

[@andrewau1993]

you have change the angle reading into meter unit. kindly tell us how to mend it.

[@kylericjoshuaconcepcion9436]

Thank you. This is very helpful ! 👌👍

[@armin_2002]

Thanks so much i really need it

[@คนในสวน-ค5ฦ]

very good ....very good....very good I like it You are a good teaching

[@danielteyehuago1633]

Thanks for your sharing it with us. This is a great tutorial and very informative. dl

[@prempatil7498]

I want to replace the dimensions reading by alphabet , is it possible?

[@malakghannam4028]

Thank you, it was helpful.

[@munthasirmi777]

Very useful...Nice explanation

[@streamingsmng8111]

Thanks, Its very useful in changing dimensions to mm to m, perfect explained.

[@CADinblack]

Thank you :)

[@kimberlyrosemagtibay5692]

Very informative thanks you so much keep up the good word

[@er.azad1113]

Very nice 🙂

[@mohammednoormepurath2929]

very nicely explained

[@CADinblack]

Thank you very much!

[@wolferiusful]

thanks u dude. u solve my problem.

[@cameronkveen6885]

Hello, I was wondering if anyone could help me with a dimensioning problem. I am making a drawing that needs tolerances. when I add them they are to small. I looked in the ribbon but it has nothing for sizing. I tried highlighting and formation. When I do that and change text height it works for my primary number. Not the tolerances. I then try the same for tolerances change the text height from 1 to 3 but it still remains 1.

[@abhikdas1012]

Excellent👍👍

[@CADinblack]

Thank you! Cheers!

[@kuyafertv3862]

Thank you my friend to teaching mesure im new student autocad.

[@CADinblack]

I am glad it helps you +KuyaFerTV . Hope you keep learning.

[@ZarkoNemcanin]

Very helpful, thanks. Also works in AC 2019

[@mahfuzurrahmansakib512]

Can u help with one thing plz? I don't have that *Iso 25* in dimension style 0:56. Do u any way of bringing that Iso 25?

[@pantovlajic509]

I have a problem. My drawing is very small. When using the tool line for example I type length of 10 lines can not be seen on the area. I've got a lot of to zoom to found how small is. I changed UNITS and nothing. Can you help me ?What should I doing ? Thanks in advance.

[@CADinblack]

Hi +Wall Company. It is normal that the drawing is small and you have to zoom it to see. AutoCAD is adimensional, that means that this 10 can be what you want. For example, you assume this "10" means 10mm, 10m or 10km. If you change the units nothing changes because it is only used for exporting an object from another drawing. Conclusion: There is no problem that the drawing is small, you can zoom it to a size that you can see everything what you do.

[@CADinblack]

After, to print or save it as a PDF, you have to adjust the layout for what you want to appear in your work. But this you will learn after. Did my explanation help you? Don't hesitate asking again:)

[@Azhar_shaikh1]

Thank you brother

[@DesignReady.]

Exactly what i wanted

[@CADinblack]

Great! +DesingReady. That's very nice to hear!

[@Priidik111]

helped me out even with autocad 2021

[@DIABULUSKIRA]

Last time i used autocad was about 6-7 years ago and i forgot most of commands. I find this tutorial very useful. But i have one question, it may be stupid, but i don't remember if it is possible to do in Autocad. When i draw whole room and i want to change distance or lenght of some lines, is it possible somehow to change that dimension or i need to draw everything again? If you didn't understand what i want here is example. In SolidWorks when you model a hole you enter value of 100mm and later if you want to change ot to 80mm you just dpuble click at dimension line and enter a new value and hole is smaller. Is it possible to do the same thing in autocad? Thanks in advance. :)

[@Kalanchoe1]

I'm just learning at school right now and if I understand what you want to do, then just highlight and right click on the line you want, click on properties and change the coordinates to what you want. Or use a stretch function on the line. I'm not sure what you find difficult. ive never had a reason to completly redo and Acad drawing.

[@monles2352]

Thank you so much!

[@mahmadjaved1124]

Thanks a lot what a simple and useful video

[@CADinblack]

Thank you very much +M Ahmad Javed

[@muhammadammarhaziq2998]

Thanks dude 👍👍👍

[@alvinkert5703]

it is really simple and very helpful. thanks a lot

[@naelshannon449]

thank you a lot sir i got from you what i need by easy way

[@KayahlaThema]

Thank You So Much!!

[@tracychan6155]

I love u, it is so helpful.

[@mikea7174]

Thank you thank you thank you. 🙏

[@ferrysarbs2487]

Now I understand Thank you verymuch your tutorial video

[@siddhantabarman]

Thanks I really want this

[@ScripcaLiviuE]

YOU ARE AMAZING, THANK YOU - SUBSCRIBED

[@rjcordova7571]

Big help men thanks!

[@CADinblack]

I am happy you liked the tutorial. +RJ Cordova

[@hraochittibomma4916]

excellent, simply good

[@Alex-mm5zj]

Thanks, you help me a lot

[@mahfuzurrahmansakib512]

Can u help with one thing plz? I don't have that *Iso 25* in dimension style 0:56. Do u any way of bringing that Iso 25?

[@noorh8047]

thanks!! clear

[@bhaskardebnath324]

thank you, thank you very much, Sir.

[@JC-ct6km]

Why cant i edit the text height on mine

[@CADinblack]

Hi. Please make sure that you are you using the right "dimension style". You have to select it from the tab list above.

[@bhukyarajkumar8676]

Thank you so much

[@CADinblack]

You're most welcome

[@gatx-1057]

Thank you...this is helpfull

[@ЖикицаДимић]

2:35 3280 mm is equal to 3.28 m not 32.80 m

[@CADinblack]

Hello +Жикица Димић Of course, you are correct. I didn't noticed it. I will make an indication in the video description!

[@naveedalogy1695]

tnxs alot for shring a knowladgeable video \

[@ayeshkaluthanthri5132]

very useful

[@edrickigianto6772]

Thanks a lot!!

[@aliisa8556]

VERY USFUL THX

[@jaycredo9394]

Wow! This is informative. Thenkz ahh luht!

[@CADinblack]

Thank you very much +Jay Credo

[@atakank4352]

Thanks man ;)

[@JoeLovesYou2]

Thanks mate

[@muhammadrizwan3834]

Thanks a lot sir

[@ejreading]

Excellent.....Thanks!

[@yaxyeshawiir3013]

You make my day thanks you educate me Wlh

[@mjdizon1729]

What about mm? No decimal

[@M_B_S_88]

helpful, thank you and keeping good wor

[@2889Daniël]

thank you

[@shalompaul2743]

Thanks Alot

[@jk-bq8pr]

How do n 2018

[@mardiemedia]

TOP thanks!!

[@ilovekakashi2010]

thanks man

[@VourakisCivil]

Thanks Broooo!!!

[@deniss.d]

Thanks bro

[@barnamalacomputertrainingc6098]

Sir, your Tutorials is very Comfortable & State-forward.

[@k.agatin7799]

How about theres no text?

[@Bri-lw7qw]

Same process, just change the sizing under "Text Style"

[@pranavpv4412]

Tnks🙌🙌🙌

[@CADinblack]

Welcome 😊Thank you Pranav

[@bgmdccbelladbagewadi876]

THANKS

[@thangammanikandan7025]

thank u sir

[@grabknowledge7890]

Thanku sirr...

[@aarifmalik3813]

You are making it much complex ! Simple click on d, then change the primary units and text size and arrow size !