Autocad Tutorial Dynamic Block 2D Door With Stretch And Scale Actions

[@noliabalon9021]

Very clear tutorial, thank you so much sir. From Philippines.

[@MufasuCAD]

You are very welcome

[@kevinantony7076]

Terima kasih bang, dari tutorial ini saya bisa mendapatkan proyek jutaan dollar. Salam Luxury

[@kevinantony7076]

Sudah saya sematkan di facebook dan instagram bang

[@zero6two6]

Bless you sir. Helped me today 2022. Cheers

[@jasonleonard3189]

Great tutorial. If you wanted to add a rotate parameter to the door to have the freedom to change the door from 90 degrees to 30 degress, is there an action that you can add to the door swing arc so that it also changes with the door rotate parameter?

[@m.s.t2263]

thank you so much for the explanation dude

[@samyyoussef8380]

The best ever on this point, very straight forward and helpful, thank you man.

[@rakeshvishwakarma3090]

Thank You Sir. very Helpful tutorial

[@MufasuCAD]

You are most welcome

[@hassansadeghi]

hi. I'm doing this practice but the process has one problem. when I make scale action to arc and then test the block. stretching the block will not affect at the end of the arc (a place where arc adheres to the door frame) doesn't stick on that point and goes further!

[@guilhermehenrique577]

you have to put the linear parameter right above the circle center and end point otherwise you`ll got distorcion at drawing

[@yorganxi7677]

wow thanks!!! this was so far the best tutorial! thanks once again!!

[@jelenara9743]

Thank u so sos much! Great tutorial!

[@Batool778]

Thank you for the clear explanation but it is not working for me the door rectangle gets shorter when i stretch

[@inspiredbob4392]

Sir thanks for uploading such videos. Please add more videos regarding 2d dynamic blocks.

[@alimarzouk3905]

Dear Mufasu thanks alot. Please could you tell me how can i get Autocad fabrication MEP .

[@enkhtsetsegerdenebaatar4275]

How does wall line disappearing? Is there any format?

[@bingingwithcomicsnerd8069]

Will it still work if i'm gonna add flip and rotate actions?

[@MufasuCAD]

yaa just try it

[@taylorrobison9790]

This was very helpful! Do you know how to use the stretch command with an increment parameter by chance? Say I want to create a typical catch basin that has a certain length wing and those increments can only go up by 4' at a time. So I need a catch basin with a 4' wing, 8' wing, 12' wing, and 16' wing. I'd like to make it dynamic instead of creating 4 different blocks. Thanks!!

[@R15HI]

you can add a lookup table

[@anasazees7822]

Very helpful. Thank u somuch bro :)

[@5041989lev]

Thanks a lot!!!

[@moussadiab6527]

thank you

[@MufasuCAD]

You're welcome

[@Ryohgantz]

is the mufasu cad owner indonesian ? please make video how to create 3d dynamic block, for simple example maybe, 3d dynamic block about pipe sizing 1/2" to 2". thank you

[@osoriojeronimo7667]

SO HELPFULL.. TAHNK YOU

[@nicolasfredette8564]

Great tutorial brother... But take a second or two to explain what is the point of your "click here, grab this, select objects, click parameter... etc." just tell us what is going to happen/why we are doing it.

[@9356392778]

Superb

[@minaskomalath6819]

wawooo bro very nice

[@abdulmax5168]

When i flip the object and then strecthy it streches in oppsite side

[@RohitKumar-yj6tq]

Can u explain some more use of Wipeout comment

[@aliska382]

Annoying accent, cant stand it, skip this video